Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. R. Geraldes et al., “The Design of Exactly-Constrained X-Ray Mirror Systems for Sirius”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 173-178. doi:10.18429/JACoW-MEDSI2018-WEOAMA04
[n] H. R. Kremers, J. P. M. Beijers, and S. Brandenburg, “Optimization Of Low-Energy Beam Transport”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOOAMH03, pp. 33-37.
[n] D. W. Peterson, V. Bharadwaj, J. Klen, R. Pasquinelli, and R. Webber, “An Improved 1.26 MHz System for the Fermilab Antiproton Accummulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 237-240.
[n] Y. Cho et al., “Effects of Depolarizing Resonances on a Circulating Beam of Polarized Protons during Acceleration or Storage in a Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1509-1512.
[n] T. P. Wangler, A. Lombardi, and P. Lapostolle, “Space-Charge-Induced Emittance Growth in an Elliptical Charged Particle Beam with a Parabolic Density Distribution”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3606-3609.
[n] Y. Bao, A. Caldwell, D. Greenwald, and G. X. Xia, “Frictional Cooling for a Slow Muon Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE047, pp. 3452-3454.
[n] H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602.
[n] J. M. Peterson and E. Forest, “Correction of Random Multipole Errors with Lumped Correctors”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 827-830.
[n] V. G. Cherepkov, “A Compact High-Voltage Source on the Basis of ELV Accelerator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 264-266. doi:10.18429/JACoW-RUPAC2018-TUPSA56
[n] V. L. Auslender et al., “ELECTRON ACCELERATOR FOR ENERGY UP TO 5.0 MEV AND BEAM POWER UP TO 50 KW”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THJI03, pp. XX-XX.
[n] M. M. Strohmeier et al., “Development of a Scintillator Probe Based on Fiber Optics for Radial Beam Diagnostics of the Ion Beam of the 88-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB02, pp. 262-264.
[n] J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
[n] A. Moretti and P. F. Schultz, “Operation of Argonne National Laboratory's RF Particle Separator in the Travelling Wave Mode”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1113-1116.
[n] A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
[n] W. Peter, R. J. Faehl, A. Kadish, and L. E. Thode, “Criteria for Vacuum Breakdown in RF Cavities”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3454-3457.
[n] Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 906-909. doi:10.18429/JACoW-IPAC2016-MOPOY026
[n] K. S. Premo, T. T. Arkan, Y. O. Orlov, and N. Solyak, “LCLS-II Fundamental Power Coupler Mechanical Integration”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB086, pp. 1340-1342.
[n] P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1647-1650.
[n] M. Galonska et al., “The HIT Gantry: From Commissioning to Operation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA004, pp. 3636-3638.
[n] T. O. Raubenheimer et al., “A Damping Ring Design for the SLAC Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC02, pp. 701-703.
For LaTeX
Use Complete Form
For BibTeX
References
- R. R. Geraldes et al., “The Design of Exactly-Constrained X-Ray Mirror Systems for Sirius”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 173-178.
- H. R. Kremers, J. P. M. Beijers, and S. Brandenburg, “Optimization Of Low-Energy Beam Transport”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper MOOAMH03, pp. 33-37.
- D. W. Peterson, V. Bharadwaj, J. Klen, R. Pasquinelli, and R. Webber, “An Improved 1.26 MHz System for the Fermilab Antiproton Accummulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 237-240.
- Y. Cho et al., “Effects of Depolarizing Resonances on a Circulating Beam of Polarized Protons during Acceleration or Storage in a Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1509-1512.
- T. P. Wangler, A. Lombardi, and P. Lapostolle, “Space-Charge-Induced Emittance Growth in an Elliptical Charged Particle Beam with a Parabolic Density Distribution”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3606-3609.
- Y. Bao, A. Caldwell, D. Greenwald, and G. X. Xia, “Frictional Cooling for a Slow Muon Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE047, pp. 3452-3454.
- H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602.
- J. M. Peterson and E. Forest, “Correction of Random Multipole Errors with Lumped Correctors”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 827-830.
- V. G. Cherepkov, “A Compact High-Voltage Source on the Basis of ELV Accelerator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 264-266.
- V. L. Auslender et al., “ELECTRON ACCELERATOR FOR ENERGY UP TO 5.0 MEV AND BEAM POWER UP TO 50 KW”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THJI03, pp. XX-XX.
- M. M. Strohmeier et al., “Development of a Scintillator Probe Based on Fiber Optics for Radial Beam Diagnostics of the Ion Beam of the 88-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB02, pp. 262-264.
- J. R. Chen, G. Y. Hsiung, K. T. Hsu, C. H. Kuo, and T. F. Lin, “Development of Local Orbit Feedback for Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP45C, pp. 1714-1716.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- S. Seletskiy and P. Tenenbaum, “The Optimized Bunch Compressor for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOAAB02, pp. 1958-1960.
- A. Moretti and P. F. Schultz, “Operation of Argonne National Laboratory's RF Particle Separator in the Travelling Wave Mode”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1113-1116.
- A. Sato et al., “Six-sector FFAG Ring to Demonstrate Bunch Rotation for PRISM”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP007, pp. 3389-3391.
- W. Peter, R. J. Faehl, A. Kadish, and L. E. Thode, “Criteria for Vacuum Breakdown in RF Cavities”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3454-3457.
- Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 906-909.
- K. S. Premo, T. T. Arkan, Y. O. Orlov, and N. Solyak, “LCLS-II Fundamental Power Coupler Mechanical Integration”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB086, pp. 1340-1342.
- P. Tavares, “Ion Clearing in the LNLS UVX-2 Soft X-Ray Source”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1647-1650.
- M. Galonska et al., “The HIT Gantry: From Commissioning to Operation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA004, pp. 3636-3638.
- T. O. Raubenheimer et al., “A Damping Ring Design for the SLAC Next Linear Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC02, pp. 701-703.
Back to search