JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Alimov, A. Chepurnov, O. Chubarov, D. Ermakov, K. Gudkov, and V. Shvedunov, “CW Linear Accelerator with High Beam Current”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-101, pp. 603-605. 
[n]	E. Prebys, S. A. Antipov, and H. Piekarz, “Proton Injection into the Fermilab Integrable Optics Test Accelerator (IOTA)”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2627-2629. doi:10.18429/JACoW-IPAC2015-WEPWA055
[n]	M. Apollonio, W. J. Hoffman, A. J. Rose, A. Thomson, and R. Bartolini, “Girder Alignment in the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME054, pp. 3052-3054. 
[n]	G. Hemmie, “DESY II, a New Injector for the DESY Storage Rings PETRA and DORIS II”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2028-2031. 
[n]	M. Masuzawa, Y. Funakoshi, T. T. Nakamura, and J.-I. Odagiri, “Beam Orbit Control System for the KEKB Crab Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS031, pp. 613-615. 
[n]	K. Egawa and M. Masuzawa, “Magnet Field Measurement for KEK B-factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16G, pp. 1948-1950. 
[n]	L. Catani, F. Broggi, A. Cianchi, D. Di Giovenale, and G. Di Pirro, “On-Line Beam Loss Position Monitors for SPARC”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC09, pp. 517-519. 
[n]	G. Hemmie et al., “Design, Construction and Performance of the DESY II Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3625-3628. 
[n]	J. R. Calvey et al., “Simulations of Electron-Cloud Current Density Measurements in Dipoles, Drifts and Wigglers at CesrTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP043, pp. 4628-4630. 
[n]	D. J. Scott et al., “Secondary Electron Yield Measurements of Fermilab's Main Injector Vacuum Vessel”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC019, pp. 166-168. 
[n]	G. Hemmie and J. R. Maidment, “DESY III, The New Proton Injector for HERA”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 172-175. 
[n]	S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n]	E. Prebys, K. Carlson, H. Piekarz, A. Valishev, and S. A. Antipov, “Proton Injection into the Fermilab Integrable Optics Test Accelerator (IOTA)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1638-1640. doi:10.18429/JACoW-IPAC2016-TUPMY042
[n]	A. Alimov et al., “Continuous Wave RF Gun: Computer Simulation, Design and Tuning”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 778-781. 
[n]	R. Bakker, D. Kraemer, B. Kuske, P. Kuske, and R. Mueller, “Establishment of a Model for Interpretation and Correction Tools for BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP48, pp. 2379-2381. 
[n]	K. Egawa and M. Masuzawa, “Preliminary Results of the KEKB Quadrupole Magnet Measurements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP17G, pp. 1951-1953. 
[n]	O. Chubarov, D. Ermakov, and V. Shvedunov, “Beam Phasing of Autoscillating Systems”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1969-1972. 
[n]	S. A. Antipov, P. Adamson, S. Nagaitsev, and M.-J. Yang, “Study of Fast Instability in Fermilab Recycler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1728-1730. doi:10.18429/JACoW-IPAC2016-TUPOR029
[n]	B. Kuske, G. Isoyama, H. Lehr, and G. Wuestefeld, “Layout of the BESSY II Lattice”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1420-1423. 
[n]	W. Hartung et al., “Measurements of Secondary Electron Yield of Metal Surfaces and Films with Exposure to a Realistic Accelerator Environment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI087, pp. 3493-3495. 
[n]	S. A. Antipov, A. Didenko, V. A. Lebedev, and A. Valishev, “Stripline Kicker for Integrable Optics Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3390-3392. doi:10.18429/JACoW-IPAC2015-WEPTY051
[n]	D. K. Olsson, “Online Optimisation of the MAX IV 3 GeV Ring Dynamic Aperture”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2281-2283. doi:10.18429/JACoW-IPAC2018-WEPAL047
[n]	R. Bakker, T. Birke, B. Kuske, R. Lange, and R. Mueller, “Experiences with Commissioning Software Tools at BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP49, pp. 2382-2384. 
[n]	R. Visintini and D. M. Molaro, “Elettra Booster Magnet Power Supplies: One Year of Operations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP019, pp. 1571-1573. 
[n]	V. Sajaev, B. Kuske, D. Schirmer, and G. Wuestefeld, “Optimization and Tracking Studies for the 1.7 GeV Light Source BESSY II”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 994-997. 
[n]	G. Hemmie, “Status of the DESY II Project”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 851-854. 
[n]	D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “Trials of Beam-Based Sextupole Calibration through 2nd Order Dispersion”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1551-1553. doi:10.18429/JACoW-IPAC2019-TUPGW064
[n]	A. Alimov et al., “Two Section CW Electron Linac for Industrial Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 766-769. 
[n]	D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “2nd Order Optics Symmetrisation through Off-Energy Orbit Response Matrix Analysis”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 841-843. doi:10.18429/JACoW-IPAC2019-MOPTS004
[n]	P. F. Tavares et al., “Status of the MAX IV Accelerators”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1185-1190. doi:10.18429/JACoW-IPAC2019-TUYPLM3
[n]	D. Olsson, L. Malmgren, and K. ?â, “A Waveguide Overloaded Cavity Kicker for the MAX IV Bunch-by-Bunch Feedback System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4289-4291. doi:10.18429/JACoW-IPAC2017-THPIK087
[n]	D. Olsson, F. Curbis, E. Mansten, S. Thorin, and S. Werin, “Transverse RF Deflecting Structures for the MAX IV LINAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3684-3687. doi:10.18429/JACoW-IPAC2018-THPAL027
[n]	N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190. 
[n]	M. Abo-Bakr, J. Knobloch, B. Kuske, and A. M. Meseck, “Start-To-End Injector and Linac Tolerance Studies for the BESSY FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS03, pp. XX-XX. 
[n]	B. Kuske, M. Abo-Bakr, and A. M. Meseck, “Impact Studies of bunch parameter variations on the performance of the BESSY HGHG FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS05, pp. XX-XX. 
[n]	F. R. Osswald, T. Adam, P. G. Graehling, M. Heine, C. Maazouzi, and E. K. Traykov, “Transverse Phase Space Scanner Developments at IPHC”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 293-296. doi:10.18429/JACoW-IBIC2019-TUPP007
[n]	M. Masuzawa, K. Egawa, and K. Tsuchiya, “Feasibility Study of a Permanent Magnet Made from High-Tc Bulk Superconductor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS089, pp. 2580-2582. 
[n]	D. Olsson, ?à. Andersson, F. J. Cullinan, and P. F. Tavares, “Commissioning of the Bunch-by-Bunch Feedback System in the MAX IV 1.5 GeV Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3688-3691. doi:10.18429/JACoW-IPAC2018-THPAL028
[n]	H. Duarte and F. Cullinan, “Performance of HOM dampers in the 100 MHz RF cavities in the MAX IV 3 GeV ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS064, unpublished. 
[n]	G. Hemmie and M. Leneke, “Reduction of the Horizontal Antidamping in the DESY Electron Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2546-2549. 
[n]	A. Febel and G. Hemmie, “PIA, the Positron Intensity Accumulator for the PETRA Injection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3244-3246. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search