Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Beam Properties of UVSOR Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2550-2553.
[n] G. Bassi, “Vlasov-Fokker-Planck Simulations of Passive Higher-Harmonic Cavity Effects in ALS-U”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 357-359. doi:10.18429/JACoW-IPAC2019-MOPGW099
[n] E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 464-466. doi:10.18429/JACoW-SRF2019-TUP026
[n] C. Compton, D. Miller, T. R. Bieler, D. Kang, S. K. Chandrasekaran, and N. T. Wright, “Quality Assurance and Acceptance Testing of Niobium Material for Use in the Construction of the Facility for Rare Isotope Beams (FRIB) at Michigan State University (MSU)”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP033, pp. 174-179.
[n] Z. F. Seidov, Y. Pinhasi, and A. Yahalom, “Spot-to-Beam Procedure”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS15, pp. XX-XX.
[n] G. V. Sotnikov, K. V. Galaydych, and A. M. Naboka, “Nonlinear Theory of Wakefield Excitation in A Rectangular Multizone Dielectric Resonator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD061, pp. 4422-4424.
[n] P. T. Smith, A. Greer, D. J. N. McCubbin, B. A. Roberts, M. Roberts, and P. B. Taylor, “Control System Design of the CHIMERA Fusion Test Facility”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 827-831. doi:10.18429/JACoW-ICALEPCS2023-TUPDP110
[n] J. T. Donohue, L. Courtois, J. Gardelle, and P. Modin, “Observation of Coherent Smith-Purcell Radiation Using an Initially Continuous Flat Beam”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC65, pp. 386-389.
[n] S. Posen and M. Liepe, “Nb3Sn - Present Status and Potential as an Alternative SRF Material”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOC03, pp. 431-436.
[n] V. Schoefer et al., “RHIC Polarized Proton Operation in Run 22”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1765-1767. doi:10.18429/JACoW-IPAC2022-WEPOST031
[n] J. Sellmair and G. Korschinek, “Operation of a Laser-Ion Source in a Van De Graaf”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1393-1396.
[n] S. M. Hartman, “Performance of COTS I/O Modules in an Accelerator Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT070, pp. 3822-3824.
[n] M. H. Stokely, M. P. Dehnel, T. M. Stewart, and B. Wieland, “A High Current PET Target and Compact Industrial Beamline”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP014, pp. 2808-2810.
[n] H. S. Uhm and R. C. Davidson, “Free Electron Laser Instability for a Relativistic Electron Beam in a Helical Wiggler Field”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3187-3190.
[n] Y. Kawai Parker and H. Seki, “Proton LINACs for Medical Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP004, pp. 1296-1296.
[n] T. C. Jiang et al., “The Development of a Prototype Fundamental Power Coupler for CiADS and HIAF Half Wave Resonators”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 295. doi:10.18429/JACoW-SRF2021-MOPCAV014
[n] A. F. D. Morgan and G. Rehm, “A Fast Quadrupole Magnet for Machine Studies at Diamond”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF25, pp. 605-607.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Kasuga, M. Hasumoto, T. Kinoshita, and H. Yonehara, “Beam Properties of UVSOR Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2550-2553.
- G. Bassi, “Vlasov-Fokker-Planck Simulations of Passive Higher-Harmonic Cavity Effects in ALS-U”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 357-359.
- E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 464-466.
- C. Compton, D. Miller, T. R. Bieler, D. Kang, S. K. Chandrasekaran, and N. T. Wright, “Quality Assurance and Acceptance Testing of Niobium Material for Use in the Construction of the Facility for Rare Isotope Beams (FRIB) at Michigan State University (MSU)”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP033, pp. 174-179.
- Z. F. Seidov, Y. Pinhasi, and A. Yahalom, “Spot-to-Beam Procedure”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS15, pp. XX-XX.
- G. V. Sotnikov, K. V. Galaydych, and A. M. Naboka, “Nonlinear Theory of Wakefield Excitation in A Rectangular Multizone Dielectric Resonator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD061, pp. 4422-4424.
- P. T. Smith, A. Greer, D. J. N. McCubbin, B. A. Roberts, M. Roberts, and P. B. Taylor, “Control System Design of the CHIMERA Fusion Test Facility”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP110, pp. 827-831.
- J. T. Donohue, L. Courtois, J. Gardelle, and P. Modin, “Observation of Coherent Smith-Purcell Radiation Using an Initially Continuous Flat Beam”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC65, pp. 386-389.
- S. Posen and M. Liepe, “Nb3Sn - Present Status and Potential as an Alternative SRF Material”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUIOC03, pp. 431-436.
- V. Schoefer et al., “RHIC Polarized Proton Operation in Run 22”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1765-1767.
- J. Sellmair and G. Korschinek, “Operation of a Laser-Ion Source in a Van De Graaf”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1393-1396.
- S. M. Hartman, “Performance of COTS I/O Modules in an Accelerator Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT070, pp. 3822-3824.
- M. H. Stokely, M. P. Dehnel, T. M. Stewart, and B. Wieland, “A High Current PET Target and Compact Industrial Beamline”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP014, pp. 2808-2810.
- H. S. Uhm and R. C. Davidson, “Free Electron Laser Instability for a Relativistic Electron Beam in a Helical Wiggler Field”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3187-3190.
- Y. Kawai Parker and H. Seki, “Proton LINACs for Medical Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP004, pp. 1296-1296.
- T. C. Jiang et al., “The Development of a Prototype Fundamental Power Coupler for CiADS and HIAF Half Wave Resonators”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 295.
- A. F. D. Morgan and G. Rehm, “A Fast Quadrupole Magnet for Machine Studies at Diamond”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF25, pp. 605-607.
Back to search