Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Jobs, K. J. Gajewski, V. A. Goryashko, H. Li, J. M. Y. Ruber, and R. Wedberg, “352 MHz Tetrode RF Stations for Superconducting Spoke Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4296-4298. doi:10.18429/JACoW-IPAC2017-THPIK090
[n] P. Schweitzer, E. Bonaccorsi, L. Brarda, and N. Neufeld, “Fabric Management with Diskless Servers and Quattor on LHCb”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU005, pp. 691-693.
[n] J. C. Lee, P. Chang, and C. S. Hsue, “Integral Dipole Field Calibration of the SRRC Storage Ring Combined Function Bending Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR04, pp. 804-806.
[n] P. Brindza and C. Rode, “The CEBAF Cryogenic System”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-15, pp. 76-80.
[n] Y.-E. Sun, M. D. Church, P. Piot, and C. R. Prokop, “EXPERIMENT AND SIMULATIONS OF SUB-PS ELECTRON BUNCH TRAIN GENERATION AT FERMILAB PHOTOINJECTORS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPB25, pp. 609-612.
[n] S. Imajo et al., “The Development of a Low Energy Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 751-753. doi:10.18429/JACoW-IPAC2014-MOPRI065
[n] B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
[n] K. R. Kim, B. S. Park, H. R. Lee, K. S. Kang, S. W. Kang, and B. H. Choi, “50MeV Proton Beam Test Facility for Low Flux Beam Utilization Studies of PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19011, pp. XX-XX.
[n] J. Oegren, A. K. Bhattacharyya, M. Holz, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “Beam-Based Alignment Studies at CTF3 Using the Octupole Component of CLIC Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 371-373. doi:10.18429/JACoW-IPAC2017-MOPAB108
[n] M. Kuriki et al., “Effect of Initial Parameters on the Super Flat Beam Generation with the Phase-Space Rotation for Linear Colliders”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 442-444. doi:10.18429/JACoW-IPAC2019-MOPMP009
[n] J. T??ckmantel, “SPLinac: Computer Simulations of SC Linac RF Systems with Beam”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA007, pp. XX-XX.
[n] A. Miyamoto, H. Hara, K. Sennyu, and T. Yanagisawa, “SRF Cavity Assembly in Clean Room with Horizontal Laminar Flow”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 620-622. doi:10.18429/JACoW-SRF2017-TUPB096
[n] G. Devanz et al., “Experimental Characterization of a 700 MHz =0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP126, pp. 853-855.
[n] L. V. Kravchuk, G. Romanov, and S. Tarasov, “Multipactoring Code for 3D Accelerating Structures”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THB12, pp. 821-823.
[n] J. Pina et al., “The TileCal DCS Detector Control System”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUPPP14, pp. 118-121.
[n] G. Arabidze et al., “The TILECAL Detector Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB40, pp. 250-252.
[n] K. R. Kim, B. H. Choi, H. R. Lee, K. Y. Nam, and B. S. Park, “Contruction of User Facilities for the Proton Beam Utilization of PEFP (Proton Engineering Frontier Project)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE028, pp. 1602-1604.
[n] H. R. Hiddleston, “Progress in Sodium Vapor Change Exchange Cell Development”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1600-1603.
[n] F. Bouly, M. A. Baylac, A. Gatera, and D. Uriot, “Superconducting LINAC Design Upgrade in View of the 100 MeV MYRRHA Phase I”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 837-840. doi:10.18429/JACoW-IPAC2019-MOPTS003
[n] W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 102-105. doi:10.18429/JACoW-NAPAC2019-MOPLM06
[n] T. W. Aitken et al., “Progress of the RIST Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP083L, pp. 1522-1524.
[n] L. Banchi, A. Bogoni, M. Ferianis, P. Ghelfi, L. Poti, and F. Rossi, “Synchronization of a 3GHz Repetition Rate Harmonically Mode-Locked Fiber Laser for Optical Timing Applications”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC22, pp. 358-360.
[n] J. T??ckmantel, E. Haebel, and P. Marchand, “An Improved Superconducting Cavity Design for LEP”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-18, pp. XX-XX.
[n] T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 465-468.
[n] Y. Li et al., “Moderation of Positive Muons by Helium Gas”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3667-3669. doi:10.18429/JACoW-IPAC2019-THPGW039
[n] C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
[n] M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3263-3266.
[n] J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590. doi:10.18429/JACoW-SRF2021-WEPCAV002
[n] S. Pordes et al., “Measurement of Proton and Anti-proton Intensities in the Tevatron Collider”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB038, pp. 2491-2493.
[n] P. A. Bak et al., “Status of a Radio-Frequency-Based Streak Camera with Sub-PS Time Resolution”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B02, pp. 1723-1725.
[n] C. D. Curtis, G. M. Lee, C. W. Owen, C. W. Schmidt, and W. M. Smart, “Linac H- -Beam Operation and uses at Fermilab”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3760-3763.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Jobs, K. J. Gajewski, V. A. Goryashko, H. Li, J. M. Y. Ruber, and R. Wedberg, “352 MHz Tetrode RF Stations for Superconducting Spoke Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4296-4298.
- P. Schweitzer, E. Bonaccorsi, L. Brarda, and N. Neufeld, “Fabric Management with Diskless Servers and Quattor on LHCb”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU005, pp. 691-693.
- J. C. Lee, P. Chang, and C. S. Hsue, “Integral Dipole Field Calibration of the SRRC Storage Ring Combined Function Bending Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR04, pp. 804-806.
- P. Brindza and C. Rode, “The CEBAF Cryogenic System”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-15, pp. 76-80.
- Y.-E. Sun, M. D. Church, P. Piot, and C. R. Prokop, “EXPERIMENT AND SIMULATIONS OF SUB-PS ELECTRON BUNCH TRAIN GENERATION AT FERMILAB PHOTOINJECTORS”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPB25, pp. 609-612.
- S. Imajo et al., “The Development of a Low Energy Neutron Accelerator for Rebunching Pulsed Neutrons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 751-753.
- B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
- K. R. Kim, B. S. Park, H. R. Lee, K. S. Kang, S. W. Kang, and B. H. Choi, “50MeV Proton Beam Test Facility for Low Flux Beam Utilization Studies of PEFP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19011, pp. XX-XX.
- J. Oegren, A. K. Bhattacharyya, M. Holz, J. M. Y. Ruber, V. G. Ziemann, and W. Farabolini, “Beam-Based Alignment Studies at CTF3 Using the Octupole Component of CLIC Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 371-373.
- M. Kuriki et al., “Effect of Initial Parameters on the Super Flat Beam Generation with the Phase-Space Rotation for Linear Colliders”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 442-444.
- J. T??ckmantel, “SPLinac: Computer Simulations of SC Linac RF Systems with Beam”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper SA007, pp. XX-XX.
- A. Miyamoto, H. Hara, K. Sennyu, and T. Yanagisawa, “SRF Cavity Assembly in Clean Room with Horizontal Laminar Flow”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 620-622.
- G. Devanz et al., “Experimental Characterization of a 700 MHz =0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP126, pp. 853-855.
- L. V. Kravchuk, G. Romanov, and S. Tarasov, “Multipactoring Code for 3D Accelerating Structures”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THB12, pp. 821-823.
- J. Pina et al., “The TileCal DCS Detector Control System”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUPPP14, pp. 118-121.
- G. Arabidze et al., “The TILECAL Detector Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB40, pp. 250-252.
- K. R. Kim, B. H. Choi, H. R. Lee, K. Y. Nam, and B. S. Park, “Contruction of User Facilities for the Proton Beam Utilization of PEFP (Proton Engineering Frontier Project)”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE028, pp. 1602-1604.
- H. R. Hiddleston, “Progress in Sodium Vapor Change Exchange Cell Development”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1600-1603.
- F. Bouly, M. A. Baylac, A. Gatera, and D. Uriot, “Superconducting LINAC Design Upgrade in View of the 100 MeV MYRRHA Phase I”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 837-840.
- W. Liu, O. H. Rahman, and E. Wang, “High Voltage Design of a 350 kV DC Photogun at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 102-105.
- T. W. Aitken et al., “Progress of the RIST Project”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP083L, pp. 1522-1524.
- L. Banchi, A. Bogoni, M. Ferianis, P. Ghelfi, L. Poti, and F. Rossi, “Synchronization of a 3GHz Repetition Rate Harmonically Mode-Locked Fiber Laser for Optical Timing Applications”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC22, pp. 358-360.
- J. T??ckmantel, E. Haebel, and P. Marchand, “An Improved Superconducting Cavity Design for LEP”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-18, pp. XX-XX.
- T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 465-468.
- Y. Li et al., “Moderation of Positive Muons by Helium Gas”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3667-3669.
- C. D. Curtis and G. M. Lee, “Preaccelerator Column Design”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART5-5, pp. 487-496.
- M. L. Mallory, P. Brindza, H. Laumer, and D. Poe, “Operating Experience with the Cryogenic Systems for a Superconducting Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3263-3266.
- J. Demercastel-Soulier et al., “Improvement of Chemical Etching Capabilities (BCP) for SRF Spoke Resonators at IJCLab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 590.
- S. Pordes et al., “Measurement of Proton and Anti-proton Intensities in the Tevatron Collider”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB038, pp. 2491-2493.
- P. A. Bak et al., “Status of a Radio-Frequency-Based Streak Camera with Sub-PS Time Resolution”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B02, pp. 1723-1725.
- C. D. Curtis, G. M. Lee, C. W. Owen, C. W. Schmidt, and W. M. Smart, “Linac H- -Beam Operation and uses at Fermilab”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3760-3763.
Back to search