Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] S. M. Hanna, “Characterization Techniques for X-Band Medical Accelerator Structures”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1B07, pp. 2521-2523.
[n] A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197.
[n] L. Garc?¡a-Tabar?®s, P. Abramian, J. Calero, F. Toral, A. Ijspeert, and J. C. P?®rez, “Dimensional Metrology of Cylinders Based on Digital Image Processing: Application to LHC Corrector Magnets”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE003, pp. 2394-2396.
[n] M. Pezzetti, V. Inglese, A. Tovar, M. M. Almeida, and H. Coppier, “A Fuzzy-Oriented Solution for Automatic Distribution of Limited Resources According to Priority Lists”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC077, pp. 1246-1249.
[n] E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 19, pp. 126-128.
[n] G. W. Bennett, “Insulated Target Instrumentation for the AGS Slow External Beam”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 637-640.
[n] B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2071-2074. doi:10.18429/JACoW-IPAC2019-TUPTS066
[n] B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
[n] M. Magrans de Abril, Q. King, and R. Murillo-Garcia, “The Phase-Locked Loop Algorithm of the Function Generation/Controller”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 624-628. doi:10.18429/JACoW-ICALEPCS2015-WEC3O02
[n] J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4026-4027. doi:10.18429/JACoW-IPAC2017-THPAB129
[n] C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 413-419. doi:10.18429/JACoW-MEDSI2016-FRBA02
[n] G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
[n] T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 126-129.
[n] A. Sery, “Ground Motion Studies with respect to Linac Performance”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TH205, pp. 621-625.
[n] R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3663-3666. doi:10.18429/JACoW-IPAC2016-THPMY007
[n] Z. Mart?¡, J. Campmany, J. Marcos, V. Massana, and X. N. Gavald?á, “Detailed Characterization of ALBA Quadrupoles for Beta Function Determination”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 338-340. doi:10.18429/JACoW-IPAC2015-MOPJE028
[n] R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 760-764.
[n] E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 22-25. doi:10.18429/JACoW-ICALEPCS2015-MOC3O02
[n] G. Maire, A. Kehrli, M. Pezzetti, S. Ravat, B. Charnier, and H. Coppier, “Evaluation and Implementation of Advanced Process Control with the compactRIO Material of National Instrument”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC125, pp. 1355-1358.
[n] J. Rossbach, “Short Wavelength SASE FEL: Experiment vs. Theory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOZBAB02, pp. 94-98.
[n] K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
[n] K. Hanke et al., “Status of the Upgrade of the CERN PS Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO078, pp. 3939-3941.
[n] W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
[n] R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
[n] W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
[n] L. M. Bollinger and K. W. Shepard, “Concept of a Superconducting Linac for Low-Velocity Ions”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEQ0001, pp. 217-219.
[n] N. Il, S. Bragin, and P. Reinhardt-Nickoulin, “The Transients in Linac and the Beam Fast Measuring System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1708-1711.
[n] A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n] A. Latina et al., “Electron Cooling Simulation and Experimental Benchmarks at LEIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 776-779. doi:10.18429/JACoW-IPAC2018-TUPAF039
[n] D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
[n] J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
[n] E. B. Blanco Vinuela, B. Fernandez Adiego, and A. Merezhin, “Testing and Verification of PLC Code for Process Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC080, pp. 1258-1261.
[n] A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
[n] B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2079-2082. doi:10.18429/JACoW-IPAC2023-TUPL145
[n] E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
[n] A. Shemyakin et al., “Test of a Full-Scale Prototype of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16013, pp. XX-XX.
[n] S. Blanchard et al., “The New Control Software for the CERN NA62 Beam Vacuum”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 314-317. doi:10.18429/JACoW-ICALEPCS2015-MOPGF102
[n] A. Burov et al., “Optics of the Fermilab Electron Cooler”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16039, pp. XX-XX.
[n] N. F. Ziegler, “Accelerating Cavities for an 800-MeV SOC”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 128-133.
[n] C. E. Adolphsen et al., “Beam-Based Alignment Technique for the SLC Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 977-980.
[n] F. Mateo et al., “The Upgrade of Control Hardware of the CERN NA62 Beam Vacuum”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 318-321. doi:10.18429/JACoW-ICALEPCS2015-MOPGF103
[n] N. Dobeck, G. Burtner, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-30, pp. 382-384.
[n] N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
[n] C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2418-2421. doi:10.18429/JACoW-IPAC2019-WEPMP040
[n] A. C. Crawford, S. Nagaitsev, A. Sharapa, and A. Shemyakin, “Successful MeV-Range Electron Beam Recirculation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP08C, pp. 1049-1051.
[n] N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
[n] O. Grimm, J. Feldhaus, J. Rossbach, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “The Infrared Undulator Project at the VUV-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP055, pp. XX-XX.
[n] D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440.
[n] J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n] T. Tajima et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP11, pp. 57-59.
[n] D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
[n] G. Bachy, “Design, Installation Problems and Criteria Related to Large Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1579-1582.
[n] V. N. Alferov et al., “The UNK Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1356-1359.
[n] C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
For LaTeX
Use Complete Form
For BibTeX
References
- J. K. Sekutowicz et al., “Feasibility of CW and LP Operation of the XFEL Linac”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUOCNO04, pp. 189-192.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- S. M. Hanna, “Characterization Techniques for X-Band Medical Accelerator Structures”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1B07, pp. 2521-2523.
- A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197.
- L. Garc?¡a-Tabar?®s, P. Abramian, J. Calero, F. Toral, A. Ijspeert, and J. C. P?®rez, “Dimensional Metrology of Cylinders Based on Digital Image Processing: Application to LHC Corrector Magnets”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE003, pp. 2394-2396.
- M. Pezzetti, V. Inglese, A. Tovar, M. M. Almeida, and H. Coppier, “A Fuzzy-Oriented Solution for Automatic Distribution of Limited Resources According to Priority Lists”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC077, pp. 1246-1249.
- E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 19, pp. 126-128.
- G. W. Bennett, “Insulated Target Instrumentation for the AGS Slow External Beam”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 637-640.
- B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, T. C. Q. Noakes, and C. P. Welsch, “Re-optimisation of the ALICE Gun Upgrade Design for the 500-pC Bunch Charge Requirements of PERLE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2071-2074.
- B. Rusnak et al., “High Intensity Proton Linac Activities at Los Alamos”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A01, pp. 1-11.
- M. Magrans de Abril, Q. King, and R. Murillo-Garcia, “The Phase-Locked Loop Algorithm of the Function Generation/Controller”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 624-628.
- J. Szewinski et al., “Contribution to the ESS LLRF System by Polish Electronic Group”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4026-4027.
- C. Colldelram et al., “The Nanobender: A New X-Ray Mirror Bender With Nanometer Figure Correction”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 413-419.
- G. Burtner, N. Dobeck, O. Garza, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1905-1908.
- T. L. Lavine, R. H. Miller, P. L. Morton, and R. D. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 126-129.
- A. Sery, “Ground Motion Studies with respect to Linac Performance”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TH205, pp. 621-625.
- R. Salemme, V. Baglin, G. Bregliozzi, and P. Chiggiato, “Vacuum Performance of Amorphous Carbon Coating at Cryogenic Temperature with Presence of Proton Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3663-3666.
- Z. Mart?¡, J. Campmany, J. Marcos, V. Massana, and X. N. Gavald?á, “Detailed Characterization of ALBA Quadrupoles for Beta Function Determination”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 338-340.
- R. E. Worsham et al., “A 4-MeV Experimental Separated-Orbit Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 760-764.
- E. Blanco Vinuela, B. Bradu, R. Marti Martinez, R. Mazaeda, L. de Frutos, and C. de Prada, “PIDTUNE: A PID Autotuning Software Tool on UNICOS CPC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 22-25.
- G. Maire, A. Kehrli, M. Pezzetti, S. Ravat, B. Charnier, and H. Coppier, “Evaluation and Implementation of Advanced Process Control with the compactRIO Material of National Instrument”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC125, pp. 1355-1358.
- J. Rossbach, “Short Wavelength SASE FEL: Experiment vs. Theory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOZBAB02, pp. 94-98.
- K. W. Shepard, L. M. Bollinger, and R. C. Pardo, “The ATLAS Positive Ion Injector”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE102, pp. 510-514.
- K. Hanke et al., “Status of the Upgrade of the CERN PS Booster”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO078, pp. 3939-3941.
- W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320.
- R. L. Geng, A. Crawford, G. Eremeev, and H. Padamsee, “Continuous Current Oscillation Electropolishing and Applications to Half-Cells”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP13, pp. 311-312.
- W. J. Ramler et al., “Progress in the Development of Superconducting Resonators for Heavy Ion Acceleration”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper G03, pp. 168-174.
- L. M. Bollinger and K. W. Shepard, “Concept of a Superconducting Linac for Low-Velocity Ions”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEQ0001, pp. 217-219.
- N. Il, S. Bragin, and P. Reinhardt-Nickoulin, “The Transients in Linac and the Beam Fast Measuring System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1708-1711.
- A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 251-254.
- A. Latina et al., “Electron Cooling Simulation and Experimental Benchmarks at LEIR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 776-779.
- D. Schrage et al., “CW RFQ Fabrication and Engineering”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper WE1003, pp. 679-683.
- J. D. Sedillo, J. D. Gilpatrick, J. D. Nguyen, and M. E. Gruchalla, “LANSCE 1L Harp Data Acquisition System Upgrade”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD11, pp. 438-441.
- E. B. Blanco Vinuela, B. Fernandez Adiego, and A. Merezhin, “Testing and Verification of PLC Code for Process Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC080, pp. 1258-1261.
- A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX.
- B. Hounsell and J. McKenzie, “Beam dynamics of the RUEDI diffraction beamline”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL145, pp. 2079-2082.
- E. Gray, A. Shapiro, and G. Spalek, “A Radio-Frequency Quadrupole Accelerator Longitudinal Field Stabilizer”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-34, pp. 122-124.
- A. Shemyakin et al., “Test of a Full-Scale Prototype of the Fermilab Electron Cooler”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16013, pp. XX-XX.
- S. Blanchard et al., “The New Control Software for the CERN NA62 Beam Vacuum”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 314-317.
- A. Burov et al., “Optics of the Fermilab Electron Cooler”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16039, pp. XX-XX.
- N. F. Ziegler, “Accelerating Cavities for an 800-MeV SOC”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 128-133.
- C. E. Adolphsen et al., “Beam-Based Alignment Technique for the SLC Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 977-980.
- F. Mateo et al., “The Upgrade of Control Hardware of the CERN NA62 Beam Vacuum”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 318-321.
- N. Dobeck, G. Burtner, and R. LaMora, “Modular Magnet Current Regulator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-30, pp. 382-384.
- N. P. Di Monte, W. E. Norum, and C. Yao, “Commissioning of the FPGA-Based Transverse Feedback System at the Advanced Photon Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP059, pp. 218-220.
- C. Wiesner et al., “Machine Protection Aspects of High-Voltage Flashovers of the LHC Beam Dump Dilution Kickers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2418-2421.
- A. C. Crawford, S. Nagaitsev, A. Sharapa, and A. Shemyakin, “Successful MeV-Range Electron Beam Recirculation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP08C, pp. 1049-1051.
- N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
- O. Grimm, J. Feldhaus, J. Rossbach, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “The Infrared Undulator Project at the VUV-FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP055, pp. XX-XX.
- D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1437-1440.
- J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566.
- T. Tajima et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP11, pp. 57-59.
- D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
- G. Bachy, “Design, Installation Problems and Criteria Related to Large Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1579-1582.
- V. N. Alferov et al., “The UNK Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1356-1359.
- C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
Back to search