JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. Curbis et al., “Status of the Soft X-Ray Laser (SXL) Project at MAX IV Laboratory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 749-752. doi:10.18429/JACoW-FEL2019-THP084
[n]	E. Huenges, H. Morinaga, and H. Muthig, “Performance of the Munich Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-04, pp. 111-112. 
[n]	N. R. Kurita, R. M. Boyce, E. F. Daly, B. D. Scott, and T. A. Trautwein, “Overview of the SPEAR3 Vacuum System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA123, pp. 1363-1365. 
[n]	M. Jenkins et al., “A Prototype 1 Mev X-Band Linac for Aviation Cargo Inspection”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP012, pp. 853-855. 
[n]	A. Moretti, R. J. Lari, R. L. Martin, R. L. Stockley, and J. M. Watson, “Low Frequency RFQ Linacs for Heavy Ion Fusion”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E16, pp. 197-199. 
[n]	K. Ohmi and Y. Alexahin, “Effect of Beam-beam Interactions on Stability of Coherent Oscillations in a Muon Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR004, pp. 2940-2942. 
[n]	A. T. Visser and R. F. Nissen, “Pulsed Septum Magnet and Power Supply for the 8 GeV Beam Transfer Line at the National Accelerator Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 991-994. 
[n]	V. Kumar and K.-J. Kim, “Effect of Energy Spread on Start Current of Smith-Purcell BWO”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH004, pp. 13-16. 
[n]	W. P. Lysenko, E. A. Wadlinger, B. Rusnak, F. Krawczyk, K. Saadatmand, and Z. Wan, “Designing Double-Gap Linear Accelerators for a Wide Mass Range”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4038, pp. 854-856. 
[n]	H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707. 
[n]	A. Cianchi et al., “Superconducting Niobium Film for RF Applications”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF025, pp. 1021-1023. 
[n]	B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2477-2480. 
[n]	M. G. Tiefenback and D. Keefe, “Measurements of Stability Limits for a Space-Charge-Dominated Ion Beam in a Long A.G. Transport Channel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2483-2486. 
[n]	A. Facco et al., “Superconducting RF Activities at LNL”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL014, pp. XX-XX. 
[n]	M. Cargnelutti et al., “S-Band Cavity BPM Readout Electronics for the ELI-NP Gamma Beam Source”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 243-246. doi:10.18429/JACoW-IBIC2017-TUPCF15
[n]	S. Doering and U. Berges, “EPICS at the Synchrotron Radiation Source DELTA”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB32, pp. 232-234. 
[n]	P. S. Plattner, F. Hug, and T. Stengler, “Refurbishment of SRF Cavities and HOM Antenna Coating Studies for the Mainz Energy-Recovering Superconducting Accelerator (MESA)”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1226-1229. doi:10.18429/JACoW-IPAC2022-TUPOTK014
[n]	P. Brittner et al., “The Stochastic Cooling System of COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 842-845. 
[n]	D. E. Young et al., “Initial Performance of the NAL 200-MeV Linear Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 517-522. 
[n]	M. Mishima et al., “Numerical Study on Electron Beam Properties in Triode Type Thermionic RF Gun”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO50, pp. 344-347. 
[n]	J. D. Ivers, J. A. Nation, and I. Roth, “Proton Acceleration in an Induction Linac”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3380-3383. 
[n]	S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1934-1936. doi:10.18429/JACoW-IPAC2024-WECD1
[n]	M. Jenkins, J. Ollier, J. Burke, and M. Procter, “The X-ray imaging laboratory: a radiation test facility for validating industrial linacs”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3684-3686. doi:10.18429/JACoW-IPAC2024-THPR72
[n]	I. Haber, “Computer Simulation of Multiple-Beam Final Focusing Systems for Heavy Ion Fusion”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2616-2618. 
[n]	D. C. Carey, R. J. Stefanski, and L. C. Teng, “Wide Band Neutrino Beams with Quadrupole Focusing”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 755-759. 
[n]	Th. Sluyters and V. Kovarik, “Properties of H- and D- Beams from Magnetron and Penning Sources”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-4, pp. 428-431. 
[n]	A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 89-91. doi:10.18429/JACoW-HIAT2018-TUOXA01
[n]	A. Nordt et al., “Development, Characterisation and Performance of the LHC Beam Loss Monitoring System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD63, pp. 240-244. 
[n]	H. Vennekate et al., “On the Way to a 10 MeV, Conduction-Cooled, Compact SRF Accelerator”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 471-476. doi:10.18429/JACoW-SRF2023-TUPTB033
[n]	M. A. Balcewicz, M. Blaskiewicz, and Y. Hao, “Method for a Multiple Square Well Model to Study Transverse Mode Coupling Instability”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 395-398. doi:10.18429/JACoW-NAPAC2019-TUPLM12
[n]	J. King, “Studies for Muon Collider Parameters at Center-of-Mass Energies of 10 TeV and 100 TeV”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP37, pp. 3038-3040. 
[n]	D. W. Feldman et al., “Combined Thermionic and Photoelectric Emission from Dispenser Cathodes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH024, pp. 2132-2134. 
[n]	S. Seddon-Stettler et al., “Thin gold layers on niobium for SRF cavities”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 10-12. doi:10.18429/JACoW-LINAC2024-MOAA001
[n]	C. L. Li et al., “Photoinjector Drive Laser Temporal Shaping for Shanghai Soft X-Ray Free Electron Laser”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1674-1677. doi:10.18429/JACoW-IPAC2021-TUPAB121
[n]	M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3465-3468. doi:10.18429/JACoW-IPAC2024-THPG84
[n]	R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731. 
[n]	R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533. 
[n]	R. Paparella et al., “INFN-LASA for the Fermilab PIP-II”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1249-1251. doi:10.18429/JACoW-IPAC2022-TUPOTK022
[n]	R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527. 
[n]	M. Borland and J. W. Lewellen, “Initial Characterization of Coherent Synchrotron Radiation Effects in the APS Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH001, pp. 2839-2841. 
[n]	S. D. Holmes, J. D. McCarthy, S. A. Sommers, R. C. Webber, and J. R. Zagel, “The TeV I Beam Position Monitor System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1927-1930. 
[n]	E. Regenstreif, “Phase Space Acceptance of a General Triplet”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper H-10, pp. 899-904. 
[n]	M. Vossberg et al., “Adaption of the HSI -RFQ Rf-Properties to an Improved Beam Dynamics Layout”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 938-940. doi:10.18429/JACoW-IPAC2018-TUPAF086
[n]	P. A. Gurd, W. H. Strong, and J. Creel, “Programming PLCs under EPICS at the SNS Project : Further Experiences in Collaboration”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH514, pp. XX-XX. 
[n]	D. C. Larbalestier and P. J. Lee, “Prospects for the Use of High Temperature Superconductors in High Field Accelerator Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBR4, pp. 177-181. 
[n]	Y. Jiang et al., “Electron cyclotron resonance accelerator for industrial radiation processing”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1567-1569. doi:10.18429/JACoW-IPAC2025-TUPS060
[n]	R. A. Bosch, “Initial and Subsequent Growth of the Fast Ion ("Ion Hose") Instability”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH136, pp. 1987-1989. 
[n]	A. Picksley et al., “High-intensity pulse propagation in multi-GeV laser plasma accelerator stages”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR51, unpublished. 
[n]	J. P. Blewett et al., “Injection into the ISA”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 816-819. 
[n]	B. Singh, A. I. Baldwin, R. Bartolini, and I. P. S. Martin, “Effect of Insertion Devices on Beam Dynamics of the Diamond Storage Ring Using Kick Maps”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH075, pp. 2092-2094. 
[n]	T. Uchida et al., “Two-Chamber Configuration of the Bio-Nano ECRIS”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT002, pp. 43-45. 
[n]	M. Xin, K. Safak, F. X. Kaernter, P. T. Callahan, and M. Y. Peng, “All-Fiber Approach to Long-Term Stable Timing Distribution System”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 122-125. doi:10.18429/JACoW-FEL2015-MOP042
[n]	M. Polyanskiy, M. Babzien, D. Choge, W. Li, M. Palmer, and I. Pogorelsky, “Status and perspectives of multi-terawatt long-wave infrared lasers for particle acceleration research”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS127, unpublished. 
[n]	D. F. Marcks and R. B. Wehrle, “Secondary Beam Targetry Developments”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 955-960. 
[n]	M. Galonska et al., “Data Supply of Accelerator Devices - Data Management of Device Process Data at a Medical Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 477-480. doi:10.18429/JACoW-IPAC2018-MOPML033
[n]	B. Stadler, “RF System Development for the Heavy Ion Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 385-390. 
[n]	M. Lynch, W. Reass, and P. Tallerico, “SNS Linac RF System Overview”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBL5, pp. 453-455. 
[n]	V. Mironov, S. L. Bogomolov, A. E. Bondarchenko, A. A. Efremov, K. I. Kuzmenkov, and V. N. Loginov, “Simulations of ECRIS Performance for Different Working Materials”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 170-175. doi:10.18429/JACoW-ECRIS2018-WEB1
[n]	T. Murata et al., “Development of Phonon Dynamics Measurement System by MIR-FEL and Pico-second Laser”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 615-617. doi:10.18429/JACoW-FEL2015-WEP010
[n]	S. G. Arutunian et al., “First Experimental Results And Improvements On Profile Measurements With The Vibrating Wire Scanner”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM15, pp. XX-XX. 
[n]	C. G. Maiano et al., “ESS Elliptical Cryomodules Tests at Lund Test Stand”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1261-1264. doi:10.18429/JACoW-IPAC2022-TUPOTK026
[n]	F. Liu, H. B. Chen, J. Y. Liu, Z. N. Liu, J. Shi, and H. Zha, “DESIGN OF A COMPACT VARIABLE X-BAND RF POWER SPLITTER”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4194-4196. doi:10.18429/JACoW-IPAC2019-THPTS039
[n]	K. R. L. Baker et al., “Development of a Virtual Diagnostic for Estimating Key Beam Descriptors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 969-972. doi:10.18429/JACoW-IPAC2022-TUPOST048
[n]	A. Citron et al., “Performance of the Karlsruhe Superconducting Proton Linear Testaccelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3751-3755. 
[n]	V. Scarpine et al., “Design of a non-invasive laser-based beam profile monitor system for the new Fermilab PIP-II superconducting H- linac”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 543-546. doi:10.18429/JACoW-IBIC2025-TUPMO31
[n]	P. Tenenbaum and D. Onoprienko, “Direct Measurement of the Resistive Wakefield in Tapered Collimators”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT158, pp. 2212-2214. 
[n]	M. Xia, H. Li, Y. Xu, Z. Zhao, and N. Yang, “Study of the radiation field from multiple out-coupling holes in an infrared free electron laser oscillator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 435-437. doi:10.18429/JACoW-IPAC2024-MOPG73
[n]	A. M. Porcellato et al., “Operation Experience with ALPI Resonators”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA006, pp. XX-XX. 
[n]	J. D. Simpson, R. Konecny, S. L. Kramer, and D. Suddeth, “Slot Coupled Beam Signal Pickup Development at Argonne National Laboratory”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3654-3657. 
[n]	L. D. Cooley, C. B. Eom, E. E. Hellstrom, and D. C. Larbalestier, “Potential Application of Magnesium Diboride for Accelerator Magnet Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB008, pp. 203-207. 
[n]	S. R. Douglass, T. F. Godlove, and E. Zaidman, “An Efficient Induction Modulator for the Relativistic Klystron Two Beam Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH023, pp. 3717-3719. 
[n]	J. A. MacLachlan, T. A. Borak, F. C. Shoemaker, and L. C. Teng, “Beam Abort System for the NAL 500 BeV Synchrotron”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 981-984. 
[n]	P. A. Gurd and W. H. Strong, “Stepper Motor Control, PLC vs VME”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAA05, pp. 285-287. 
[n]	M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4644-4646. doi:10.18429/JACoW-IPAC2017-THPVA082

For LaTeX

Use Complete Form

For BibTeX

References

Back to search