Favourites
For Word
[n] S. T. Salvatore et al., “Time Resolved X-Ray Measurements in a Simple Mirror Trap”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 162-164. doi:10.18429/JACoW-ECRIS2018-WEA4
[n] A. Sulc, S. Hunt, and T. Hellert, “Unsupervised Anomaly Detection in ALS EPICS Event Logs”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 763-769. doi:10.18429/JACoW-ICALEPCS2025-TUPD113
[n] Y. Zhao et al., “Active supervision for AGS bunch-merging with LLM-based reinforcement learning”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6336, unpublished.
[n] S.-W. Lee et al., “Python-EPICS RF Conditioning Automatic Control System at the Spallation Neutron Source”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6388, unpublished.
[n] G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
[n] V. C. Sahni, “Report on Synchrotron Radiation Source Indus-2”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper WOAB006, unpublished.
[n] A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
[n] N. Balakrishnan, J. D. Bong, A. S. Fisher, B. T. Jacobson, and L. Sapozhnikov, “LCLS-II Controls Software Architecture for the Wire Scan Diagnostics”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1556-1559. doi:10.18429/JACoW-ICALEPCS2023-THPDP087
[n] E. Chen, R. Sharankova, and J. Stanton, “Wire scanner assessment of transverse beam size in the Fermilab side-coupled linac”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2303-2306. doi:10.18429/JACoW-IPAC2024-WEPG40
[n] J. Heller, T. Flisgen, and U. van Rienen, “Computation of Wakefields and HOM Port Signals by Means of Reduced Order Models”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP092, pp. 364-366.
[n] L. Bortot, C. Benabderrahmane, F. Cianciosi, G. Le Bec, F. Perratone, and Z. QIU, “Prototype development of a compact HTS wiggler for Synchrotron Light Sources”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7071, unpublished.
[n] J. Song et al., “Design and experimental thermal validation of the mini-channel beam dump for FRIB”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 132-135. doi:10.18429/JACoW-HIAT2025-TUP04
[n] S. Proskin and A. Kulago, “Maximum Value of the Standing Wave and Travelling Wave Accelerating Structures Electronic Efficiency”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC004, pp. 453-455.
[n] E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG15, unpublished.
[n] B. Simons, J. Eldred, N. Banerjee, and V. Shiltsev, “IOTA experiment for proton pulse compression at extreme space-charge”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 486-490. doi:10.18429/JACoW-NAPAC2025-TUP055
[n] H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 722-724. doi:10.18429/JACoW-LINAC2024-THPB042
[n] J.-L. Vay et al., “Overview of the US DOE Multi-Office particle Accelerator Team (MOAT) project”, presented at the IPAC'26, Deauville, France, May 2026, paper MOV6302, unpublished.
[n] P. Pizzol, P. Chalker, J. W. Roberts, J. Wrench, O. B. Malyshev, and R. Valizadeh, “Atomic Layer Deposition of Niobium Nitride from Different Precursors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1094-1097. doi:10.18429/JACoW-IPAC2017-MOPVA100
[n] Y. Honda, A. Aryshev, M. Shevelev, and M. Shimada, “Terahertz Source Utilizing Resonant Coherent Diffraction Radiation at KEK ERL Test Accelerator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 547-549. doi:10.18429/JACoW-FEL2015-TUP080
[n] T. Furukawa et al., “Development toward Turn-key Beam Delivery for Therapeutic Operation at HIMAC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH168, pp. 2325-2327.
[n] G. Martino, T. Hellert, S. Leemann, and A. Sulc, “Autonomous Planning and Execution of Injector Tuning via the Osprey Agentic Framework”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6331, unpublished.
[n] T. Hellert et al., “Status of the Advanced Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1309-1312. doi:10.18429/JACoW-IPAC2024-TUPG37
[n] L. Celona et al., “The Prototype of the Proton Injector for the European Spallation Source”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP085, pp. 1044-1046.
[n] C. H. Chang et al., “Design and Development of an Elliptically Polarized Undulator of Length 3.5 m for TPS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD042, pp. 3183-3185.
[n] Y. Jiao and J. Wan, “Machine learning application studies in lattice design and optimization of 4th generation synchrotron radiation light source”, presented at the SAP'23, Xichang, China, Jul. 2023, paper WEAA03, unpublished.
[n] R. Lindberg, “Coupled-bunch longitudinal instabilities with a harmonic cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3538-3541. doi:10.18429/JACoW-IPAC2023-WEPL180
[n] B. F. Wei, Z. H. Bai, G. Y. Feng, and J. J. Tan, “Analysis of the Fluctuation of Resonance Driving Terms for Nonlinear Lattice Optimization”, in Proc. SAP'23, Xichang, China, Jul. 2023, pp. 41-44. doi:10.18429/JACoW-SAP2023-MOPB017
[n] W. Blokland and M. Schram, “Machine learning for improved accelerator and target reliability”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THXD1, unpublished.
[n] J. Song et al., “A single-slice rotating graphite target at FRIB”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 103-106. doi:10.18429/JACoW-HIAT2025-TUB01
[n] K. Lekomtsev et al., “Drive-Witness Acceleration Scheme Based on Corrugated Dielectric mm-Scale Capillary”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3292-3295. doi:10.18429/JACoW-IPAC2017-WEPVA018
[n] R. Lindberg, “Predicting collective dynamics and instabilities in storage ring light sources”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOZG2, unpublished.
[n] M. Noll et al., “Implementing bunch-by-bunch diagnostics at the KARA booster synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2361-2364. doi:10.18429/JACoW-IPAC2024-WEPG59
[n] S. Gammino et al., “The ECLISSE Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI007, pp. 1709-1711.
[n] M. Boscolo et al., “The status of the Interaction region design and machine detector interface of the FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 256-259. doi:10.18429/JACoW-IPAC2023-MOPA091
For LaTeX
Use Complete Form
For BibTeX
References
- S. T. Salvatore et al., “Time Resolved X-Ray Measurements in a Simple Mirror Trap”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 162-164.
- A. Sulc, S. Hunt, and T. Hellert, “Unsupervised Anomaly Detection in ALS EPICS Event Logs”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 763-769.
- Y. Zhao et al., “Active supervision for AGS bunch-merging with LLM-based reinforcement learning”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6336, this conference.
- S.-W. Lee et al., “Python-EPICS RF Conditioning Automatic Control System at the Spallation Neutron Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6388, this conference.
- G. Giordano et al., “Beam Dynamics Issues in an Extended Relativistic Klystron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC17, pp. 740-742.
- V. C. Sahni, “Report on Synchrotron Radiation Source Indus-2”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOAB006, unpublished.
- A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
- N. Balakrishnan, J. D. Bong, A. S. Fisher, B. T. Jacobson, and L. Sapozhnikov, “LCLS-II Controls Software Architecture for the Wire Scan Diagnostics”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP087, pp. 1556-1559.
- E. Chen, R. Sharankova, and J. Stanton, “Wire scanner assessment of transverse beam size in the Fermilab side-coupled linac”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG40, pp. 2303-2306.
- J. Heller, T. Flisgen, and U. van Rienen, “Computation of Wakefields and HOM Port Signals by Means of Reduced Order Models”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP092, pp. 364-366.
- L. Bortot, C. Benabderrahmane, F. Cianciosi, G. Le Bec, F. Perratone, and Z. QIU, “Prototype development of a compact HTS wiggler for Synchrotron Light Sources”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7071, this conference.
- J. Song et al., “Design and experimental thermal validation of the mini-channel beam dump for FRIB”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUP04, pp. 132-135.
- S. Proskin and A. Kulago, “Maximum Value of the Standing Wave and Travelling Wave Accelerating Structures Electronic Efficiency”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC004, pp. 453-455.
- E. Ferrari et al., “Status of the seeding upgrade for FLASH2020+ project”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG15, unpublished.
- B. Simons, J. Eldred, N. Banerjee, and V. Shiltsev, “IOTA experiment for proton pulse compression at extreme space-charge”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 486-490.
- H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 722-724.
- J.-L. Vay et al., “Overview of the US DOE Multi-Office particle Accelerator Team (MOAT) project”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOV6302, this conference.
- P. Pizzol, P. Chalker, J. W. Roberts, J. Wrench, O. B. Malyshev, and R. Valizadeh, “Atomic Layer Deposition of Niobium Nitride from Different Precursors”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1094-1097.
- Y. Honda, A. Aryshev, M. Shevelev, and M. Shimada, “Terahertz Source Utilizing Resonant Coherent Diffraction Radiation at KEK ERL Test Accelerator”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 547-549.
- T. Furukawa et al., “Development toward Turn-key Beam Delivery for Therapeutic Operation at HIMAC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH168, pp. 2325-2327.
- G. Martino, T. Hellert, S. Leemann, and A. Sulc, “Autonomous Planning and Execution of Injector Tuning via the Osprey Agentic Framework”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6331, this conference.
- T. Hellert et al., “Status of the Advanced Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG37, pp. 1309-1312.
- L. Celona et al., “The Prototype of the Proton Injector for the European Spallation Source”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP085, pp. 1044-1046.
- C. H. Chang et al., “Design and Development of an Elliptically Polarized Undulator of Length 3.5 m for TPS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD042, pp. 3183-3185.
- Y. Jiao and J. Wan, “Machine learning application studies in lattice design and optimization of 4th generation synchrotron radiation light source”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper WEAA03, unpublished.
- R. Lindberg, “Coupled-bunch longitudinal instabilities with a harmonic cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL180, pp. 3538-3541.
- B. F. Wei, Z. H. Bai, G. Y. Feng, and J. J. Tan, “Analysis of the Fluctuation of Resonance Driving Terms for Nonlinear Lattice Optimization”, in Proc. 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, pp. 41-44.
- W. Blokland and M. Schram, “Machine learning for improved accelerator and target reliability”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THXD1, unpublished.
- J. Song et al., “A single-slice rotating graphite target at FRIB”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUB01, pp. 103-106.
- K. Lekomtsev et al., “Drive-Witness Acceleration Scheme Based on Corrugated Dielectric mm-Scale Capillary”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3292-3295.
- R. Lindberg, “Predicting collective dynamics and instabilities in storage ring light sources”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOZG2, unpublished.
- M. Noll et al., “Implementing bunch-by-bunch diagnostics at the KARA booster synchrotron”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG59, pp. 2361-2364.
- S. Gammino et al., “The ECLISSE Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI007, pp. 1709-1711.
- M. Boscolo et al., “The status of the Interaction region design and machine detector interface of the FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA091, pp. 256-259.
Back to search