JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. P. Ozelis, V. Bookwalter, B. D. Madre, and C. E. Reece, “The Use of Integrated Electronic Data Capture and Analysis for Accelerator Construction and Commissioning: Pansophy from the SNS Towards the ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE062, pp. 3556-3558. 
[n]	H. Shang and M. Borland, “A Parallel Simplex Optimizer and Its Application to High-Brightness Storage Ring Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT089, pp. 4230-4232. 
[n]	X. J. Wang and X. Y. Chang, “Beam Dynamics Studies for a L-band Photoinjector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI068, pp. 1825-1827. 
[n]	J. M. Fisher, M. Arrowsmith, and E. A. Stout, “Monitoring of the National Ignition Facility Integrated Computer Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC082, pp. 1266-1269. 
[n]	B. Hounsell, W. Kaabi, M. Klein, B. L. Militsyn, and C. P. Welsch, “Optimisation of the PERLE Injector”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 107-111. doi:10.18429/JACoW-ERL2019-WEPNEC19
[n]	J. N. Corlett, J. Johnson, G. Lambertson, and F. Voelker, “Longitudinal and Transverse Feedback Kickers for the ALS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1625-1628. 
[n]	D. V. Neuffer, M. Martini, G. Prior, C. T. Rogers, and C. Y. Yoshikawa, “Muon Capture in the Front End of the IDS Neutrino Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE068, pp. 3500-3502. 
[n]	C. Tambasco et al., “Landau Damping Studies for the FCC: Octupole Magnets, Electron Lens and Beam-Beam Effects”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3150-3153. doi:10.18429/JACoW-IPAC2018-THPAF074
[n]	B. Mustapha, B. Blomberg, D. Stanton, E. Letcher, J. Martinez Marin, and K. Bunnell, “AI-ML developments for Heavy Ion Linac operations”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL003, unpublished. 
[n]	H. Sato, K. Furukawa, S. Igarashi, T. Ise, M. Muto, and T. Shintomi, “Compensation of Load Fluctuation of Power Supply System for Large Accelerator using SMES”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE009, pp. 755-757. 
[n]	K. Y. Ng, “Multiple Injections with Barrier Buckets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W018, pp. 1003-1005. 
[n]	V. G. Dudnikov and C. M. Ankenbrandt, “Efficient Plasma Generation by Positive Circulating Beams”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD045, pp. 1503-1505. 
[n]	J. S. Nielsen, N. Hertel, and S. P. M?©ller, “An Overview of the Proposed Beam Diagnostic for ASTRID2”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD24, pp. 101-103. 
[n]	D. Manglunki et al., “The First LHC p-Pb run: Performance of the Heavy Ion Production Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA061, pp. 2648-2650. 
[n]	S. Gayadeen, M. T. Heron, and G. Rehm, “A Unified Approach to the Design of Orbit Feedback with Fast and Slow Correctors”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 494-497. doi:10.18429/JACoW-ICALEPCS2015-MOPGF175
[n]	A. Castilla, J. R. Delayen, T. Satogata, and V. S. Morozov, “Modeling Crabbing Dynamics in an Electron-Ion Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2333-2335. doi:10.18429/JACoW-IPAC2015-TUPWI039
[n]	L. Jones, C. Welsch, L. Soomary, R. Valizadeh, and T. Noakes, “Characterisation of a Cs-implanted Cu photocathode”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1611-1614. doi:10.18429/JACoW-IPAC2023-TUPA138
[n]	J. S. Nielsen, N. Hertel, and S. P. M?©ller, “Status of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 197-199. doi:10.18429/JACoW-IPAC2014-MOPRO050
[n]	J. Bosser et al., “The Micron Wire Scanner at the SPS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 783-786. 
[n]	M. Sapinski et al., “Quench Protection with LHC Beam Loss Monitors”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD53, pp. 198-201. 
[n]	X. Luo et al., “HOM Analysis of the 4-cell Superconducting Cavity on CTFEL Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2918-2920. doi:10.18429/JACoW-IPAC2019-WEPRB049
[n]	H. Ono, J. Miyamatsu, M. Washio, H. Iijima, and K. Sakaue, “Study on CsKSb Photocathode for the RF Electron Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1456-1459. doi:10.18429/JACoW-IPAC2017-TUPAB059
[n]	R. C. Gupta et al., “RHIC Insertion Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2239-2242. 
[n]	C. De Martinis et al., “Beam Tests on a Proton Linac Booster for  Hadrontherapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI095, pp. 2727-2729. 
[n]	J. Camas et al., “Wire Scanner News in the CERN-SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1580-1583. 
[n]	Y. Seimiya et al., “An Optimization of ILC Positron Source for Electron-Driven Scheme”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2529-2531. doi:10.18429/JACoW-IPAC2015-WEPWA017
[n]	C. T. Rogers, D. V. Neuffer, and P. Snopok, “Front End Energy Deposition and Collimation Studies for IDS-NF”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP110, pp. 2333-2335. 
[n]	H. Maesaka et al., “Beam Diagnostic System of XFEL/SPring-8”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOOA03, pp. 11-13. 
[n]	G. Ferioli, R. Jung, J. Mann, and J. Camas, “High Sensitivity Beam Intensity and Profile Monitors for the SPS Extracted Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2498-2501. 
[n]	R. Johnson, M. A. Cummings, J. Galambos, S. Kahn, T. Roberts, and B. Vogelaar, “Pre-conceptual design of MuSTAR for UNF Transmutation Facilities and US Energy Independence”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB098, unpublished. 
[n]	E. Takada, T. Kondo, N. Shinozaki, N. Sasaki, T. Takei, and Y. Sano, “Status of HIMAC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10013, pp. XX-XX. 
[n]	G. Burt et al., “Project-Based Cooperative Learning in Accelerator Science and Technology Education”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2458-2461. doi:10.18429/JACoW-IPAC2017-TUPVA154
[n]	N. Simos, K. Brown, H. G. Kirk, R. Prigl, and K. T. McDonald, “Thermal Shock Analysis of Windows Interacting with Energetic, Focused Beam of the BNL Muon Target Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH085, pp. 1408-1410. 
[n]	C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Beam Profile Monitoring at COSY via Light Emitted by Residual Gas”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB10, pp. 185-187. 
[n]	M. Giovannozzi et al., “Optics Studies for the CERN Proton Synchrotron:  Linear and Nonlinear Modelling Using Beam Based Measurements”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG012, pp. 2913-2915. 
[n]	M. Marchi, S. Albright, D. Barrientos, and G. Gnemmi, “Cavity loops Influence on the single-bunch Instability thresholds of the CERN PS Booster”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM082, unpublished. 
[n]	M. Niccolini et al., “Real-time processing of longitudinal Schottky signals in CERN’s antiproton chain”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2252-2255. doi:10.18429/JACoW-IPAC2024-WEPG27
[n]	V. S. Kovalenko, G. A. Moortgat-Pick, A. Ushakov, S. Riemann, M. Vogt, and A. Wolski, “Spin Tracking at the International Linear Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME004, pp. 1565-1567. 
[n]	F. Curbis, O. Karlberg, S. Thorin, and S. Werin, “Prospects for Longitudinal Phase-space Measurements at the MAX IV Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3665-3667. doi:10.18429/JACoW-IPAC2014-THPME170
[n]	T. Igo, G. Isoyama, R. Kato, M. Morio, S. Suemine, and S. Kashiwagi, “Development of a Precise Timing System for the ISIR L-Band Linac at Osaka University”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH030, pp. 413-416. 
[n]	M. Weiss, “Bunching of Intense  Proton Beams with Six-Dimensional Matching to the Linac Acceptance”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 877-880. 
[n]	S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489. 
[n]	C. T. Rogers et al., “Alternative Muon Front-end for the International Design Study (IDS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE050, pp. 3455-3457. 
[n]	K. Y. Ng, “Collective Instabilities of the 50-50 GeV Muon Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP53, pp. 3077-3079. 
[n]	M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2246-2249. 
[n]	J. H. Kim et al., “Upgrade of The MPS Control System for PLS Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH443, pp. 695-697. 
[n]	Y. K. Wu, “Accelerator Physics Research and Light Source Development at Duke University”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA071, pp. 2648-2650. 
[n]	J. L. Martinez Marin, B. Mustapha, and L. K. Spentzouris, “Spin Dynamics in the JLEIC Ion Injector Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 533-535. doi:10.18429/JACoW-NAPAC2019-TUPLO02
[n]	A. Chmielinska, M. J. Barnes, W. Bartmann, F. Burkart, and B. Goddard, “Preliminary Estimate of Beam Induced Power Deposition in a FCC-hh Injection Kicker Magnet”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3475-3478. doi:10.18429/JACoW-IPAC2017-WEPVA095
[n]	I. Sugai et al., “Development of hybrid typoe carbon stripper foils with high durability against 1800K for RCS of J-PARC”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ06, pp. 122-124. 
[n]	J. Lund-Nielsen, N. Baboi, and W. Riesch, “Button Beam Position Monitors for FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC26, pp. 201-203. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search