Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. W. Jones and H. O. Sch?Ânauer, “A Method for Incorporating Image Forces in Multiparticle Tracking with Space Charge”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5B11, pp. 1381-1383.
[n] E. N. Shaposhnikova et al., “LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 992-995. doi:10.18429/JACoW-IPAC2016-MOPOY059
[n] V. F. Khan, A. D, A. Grudiev, R. M. Jones, W. Wuensch, and R. Zennaro, “Recent Progress on a Manifold Damped and Detuned Structure for CLIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE032, pp. 3425-3427.
[n] A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 246-249. doi:10.18429/JACoW-FEL2019-TUP080
[n] D. Krieg, T. J. Albert, S. Khan, and K. Sokolowski-Tinten, “Design Steps Towards an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1968-1971. doi:10.18429/JACoW-IPAC2019-TUPTS015
[n] H. Wang et al., “Injector Cavities Fabrication, Vertical Test Performance and Primary Cryomodule Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3551-3553. doi:10.18429/JACoW-IPAC2015-WEPWI030
[n] R. M. Jones, I. R. R. Shinton, and Z. Li, “Higher Order Modes in Coupled Cavities of the FLASH Module ACC39”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC125, pp. 2301-2303.
[n] D. C. Faircloth, S. R. Lawrie, T. Rutter, M. Whitehead, and T. Wood, “Initial Commissioning of the Rutherford Appleton Laboratory (RAL) Scaled Negative Penning Ion Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1314-1316. doi:10.18429/JACoW-IPAC2016-TUPMR032
[n] K. Yezza, H. Henke, and R. Lorenz, “Beam Position Monitor Developments for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1533-1536.
[n] G. V. Eremeev, W. A. Clemens, K. Macha, H. Park, and R. S. Williams, “Commissioning Results of Nb3Sn Cavity Vapor Diffusion Deposition System at JLab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3512-3514. doi:10.18429/JACoW-IPAC2015-WEPWI011
[n] B. Balhan et al., “Design and Construction of the CERN SPS Extraction Protection Elements for LIU”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2359-2362. doi:10.18429/JACoW-IPAC2019-WEPMP022
[n] V. F. Khan, R. Calaga, and A. Grudiev, “Investigation of a Ridge-loaded Waveguide Structure for CLIC X-band Crab Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO048, pp. 2411-2413.
[n] R. L. Geng et al., “Development of Ultra High Gradient and High Q0 Superconducting Radio Frequency Cavities”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO076, pp. 2474-2476.
[n] T. S. Chou and H. J. Halama, “Trapped Ions and Beam Lifetime in NSLS Storage Rings”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1773-1777.
[n] V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3559-3562. doi:10.18429/JACoW-IPAC2014-THPME134
[n] B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3563-3565. doi:10.18429/JACoW-IPAC2014-THPME135
[n] N. Vinokurov et al., “Project of the Short Pulse Facility at KAERI”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO32, pp. 287-289.
[n] L. Dassa, D. Cambiaghi, and D. Perini, “Preliminary Design of the AEGIS Test Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA051, pp. 190-192.
[n] D. C. Faircloth, S. R. Lawrie, T. Rutter, M. Whitehead, T. Wood, and V. G. Dudnikov, “Design of a Scaled High Duty Factor High Current Negative Penning Surface Plasma Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3956-3958. doi:10.18429/JACoW-IPAC2015-THPF104
[n] A. Neumann et al., “Booster Cavity and Fundamental Power Coupler Design Issues for BERLinPro”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2490-2492. doi:10.18429/JACoW-IPAC2014-WEPRI007
[n] W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1021-1024. doi:10.18429/JACoW-IPAC2024-TUPC11
[n] J. C. Brutus et al., “HIGH POWER FPC PROGRESS FOR EIC ESR CAVITIES”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP1321, unpublished.
[n] G. Vandoni, M. Ady, M. A. Hermann, R. Kersevan, and D. T. Ziemianski, “Leak Propagation Dynamics for the HIE-ISOLDE Superconducting Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2351-2353. doi:10.18429/JACoW-IPAC2014-WEPME039
[n] F. Sannibale et al., “APEX Phase-II Commissioning Results at the Lawrence Berkeley National Laboratory”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1041-1043. doi:10.18429/JACoW-IPAC2016-TUOCA02
[n] F. Galizzi, M. Caldara, and A. Jeff, “A Time-of-Flight Based Energy Measurement System for the LIGHT Medical Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4951-4953. doi:10.18429/JACoW-IPAC2018-THPML119
[n] T. S. Chou, “Surface Conditioning of Synchrotron Radiation Source to Improve Beam Lifetime”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3795-3797.
[n] L. R. Elias, “John Madey: A Short History of My Friend and Colleague”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 1-4. doi:10.18429/JACoW-FEL2017-MOA01
[n] J. F. Schmidt and W. Hillert, “Studies on Depolarization by Synchrotron Radiation using Elegant Particle Tracking”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 695-697. doi:10.18429/JACoW-IPAC2016-MOPOR046
[n] M. Meddahi et al., “Status of the LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3915-3918. doi:10.18429/JACoW-IPAC2015-THPF093
[n] N. Juntong, C. D. Beard, G. Burt, R. M. Jones, and I. R. R. Shinton, “RF Coupler Kicks and Wake-fields in SC Accelerating Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP085, pp. 2719-2721.
[n] D. Metin, A. Goldblatt, C. Vuitton, F. Roncarolo, M. Duraffourg, and M. Hamani, “Performance of Titanium, Tungsten, and Carbon as Beam Profile Monitor Materials”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 452-456. doi:10.18429/JACoW-IBIC2025-TUPMO03
[n] G. Vandoni, S. Blanchard, P. Chiggiato, and K. Radwan, “The HIE-Isolde Vacuum System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2372-2374. doi:10.18429/JACoW-IPAC2014-WEPME046
[n] I. R. R. Shinton and R. M. Jones, “Large Scale Linac Simulations Using a Globalised Scattering Matrix Approach”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP034, pp. 619-621.
[n] S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 278-282. doi:10.18429/JACoW-SRF2017-MOPB090
[n] I. Mohos, J. Bojowald, J. Dietrich, and F. Klehr Forschungszentrum J??lich GmbH, “New Schottky-Pickup for COSY-J??lich”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS07, pp. XX-XX.
[n] N. Magnin et al., “Consolidation of Re-Triggering System of LHC Beam Dumping System at CERN”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 411. doi:10.18429/JACoW-ICALEPCS2019-MOPHA088
[n] J.-F. Ostiguy, B. G. Shteynas, and N. Solyak, “Segmentation in the Project-X Low Energy CW Linac Front End”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS065, pp. 2649-2651.
[n] E. Kako et al., “Cryomodule Tests of the STF Baseline 9-cell Cavities at KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP131, pp. 868-870.
[n] H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1157-1159. doi:10.18429/JACoW-IPAC2015-MOPWI006
[n] J. Hammer, M. Magrans de Abril, and C.-E. Wulz, “Interconnection Test Framework for the CMS Level-1 Trigger System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS001, pp. 973-976.
[n] M. V. Yurkov and E. Schneidmiller, “Coherence Limits of X-ray FEL Radiation”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 5-8. doi:10.18429/JACoW-FEL2017-MOBA02
[n] R. Lorenz and K. Yezza, “Test Results on a Beam Position Monitor Prototype for the TTF”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1536-1539.
[n] J.-F. Ostiguy and N. Solyak, “Residual Focusing Asymmetry in Superconducting Spoke Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS066, pp. 2652-2654.
[n] R. Spiwoks et al., “Run Control Communication for the Upgrade of the ATLAS Muon-to-Central Trigger Processor Interface (MUCTPI)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 571-574. doi:10.18429/JACoW-ICALEPCS2017-TUPHA071
[n] R. Lorenz, “Measurement of the Beam Position in the TESLA Test Facility Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP76, pp. 527-529.
[n] J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 808-810. doi:10.18429/JACoW-IPAC2015-MOPHA014
[n] V. F. Khan, W. Anders, A. Burrill, J. Knobloch, and A. Neumann, “High Power RF Input Couplers and Test Stand for the BERLinPro Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2487-2489. doi:10.18429/JACoW-IPAC2014-WEPRI006
[n] C. Priano et al., “CNAO Synchrotron Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS007, pp. 2496-2498.
[n] A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, C. Mai, and F. Teutenberg, “The DELTA Short-Pulse Source: Upgrade Plans from CHG to EEHG”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1457-1460. doi:10.18429/JACoW-IPAC2019-TUPGW025
[n] I. R. R. Shinton et al., “Higher Order Modes in Third Harmonic Cavities for XFEL/FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC052, pp. 3007-3009.
[n] M. Olvegaard et al., “Overview of the ESSnuSB Accumulator Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 105-109. doi:10.18429/JACoW-HB2016-MOPR021
[n] M. Korostelev, I. R. Bailey, A. T. Herrod, A. Wolski, D. Stratakis, and V. Tishchenko, “Update on Bmad Simulations From Target to Storage Ring for the New Muon G-2 Experiment at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 791-794. doi:10.18429/JACoW-IPAC2017-MOPIK110
[n] C. R. Prior, G. H. Rees, and H. O. Sch?Ânauer, “Synchrotron-Based Proton Drivers for a Neutrino Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A06, pp. 963-965.
[n] M. J. Kumwenda et al., “Bremsstrahlung Photons Emission in 28-GHz Electron Cyclotron Resonance Plasma”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 219-222. doi:10.18429/JACoW-CYCLOTRONS2019-TUP028
[n] V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
[n] S. Weisz, K. Foraz, H. Gaillard, and L. Lari, “Scheduling the Installation of the Large Hadron Collider”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT042, pp. 1927-1929.
[n] B. S. Lee, M. Won, J.-K. Ahn, and T. Nakagawa, “The Development Status of Compact Linear Accelerator in Korea”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP007, pp. 112-114.
[n] A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
[n] T. S. Chou, “Photon Stimulated Desorption of Neutral Species from Aluminum”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2286-2289.
[n] B. Autin et al., “A Slow-Cycling Proton Driver for a Neutrino Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A09, pp. 966-968.
[n] A. Hershcovitch et al., “Novel Apparatus and Technique for Measuring RR Resistivity of Tube Coatings at Cryogenic Temperatures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4304-4306. doi:10.18429/JACoW-IPAC2019-THPTS081
[n] T. Kamps, R. Lorenz, and S. De Santis, “Microwave Characterization of the Waveguide BPM”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA83, pp. 2075-2077.
[n] D. Filippetto et al., “Low Energy Beam Diagnostic for APEX, the LBNL VHF Photo-injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP222, pp. 1903-1905.
[n] M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
[n] D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4530-4533. doi:10.18429/JACoW-IPAC2018-THPMK097
[n] K. Hatanaka et al., “The RCNP Atomic Beam Source”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-06, pp. 389-392.
[n] M. Di Castro, M. L. Baiguera Tambutti, S. S. Gilardoni, R. Losito, G. Lunghi, and A. Masi, “LHC Train Control System for Autonomous Inspections and Measurements”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1507-1511. doi:10.18429/JACoW-ICALEPCS2017-THPHA061
[n] A. Jeff, A. Benot-Morell, M. Caldara, and P. Nadig, “A Diagnostic Test Bench for the LIGHT Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1808-1811. doi:10.18429/JACoW-IPAC2018-WEPAF001
[n] M. Bai, M. Blaskiewicz, A. Lehrach, T. Roser, W. van Asselt, and F. Schmidt, “Measurement of Non-Linearities Using Spectrum Analysis of Driven Betatron Oscillation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH301, pp. 2041-2043.
[n] W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2414-2417. doi:10.18429/JACoW-IPAC2019-WEPMP039
[n] A. Benot-Morell, A. Faus-Golfe, M. Wendt, J. M. Nappa, and S. Vilalte, “Beam Tests of a Prototype Stripline Beam Position Monitoring System for the Drive Beam of the CLIC Two-beam Module at CTF3”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 270-272. doi:10.18429/JACoW-IPAC2016-MOPMR019
[n] M. Chen et al., “Field Measurements of the ESR Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1142-1145.
[n] E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
[n] V. Namora et al., “Eradication of Mercury Ignitron from the 400 kA Magnetic Horn Pulse Generator for CERN Antiproton Decelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2586-2588. doi:10.18429/JACoW-IPAC2018-WEPMF086
[n] H.-D. Nuhn et al., “Undulator Radiation Damage Experience at LCLS”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP046, pp. 127-130.
[n] E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
[n] S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 188-190. doi:10.18429/JACoW-FEL2015-MOP066
[n] B. Autin et al., “Design of a 2.2 GeV Accumulator and Compressor for a Neutrino Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B07, pp. 921-923.
[n] J. Ungrin et al., “IMPELA: An Industrial Accelerator Family”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1515-1518.
[n] A. Benot-Morell et al., “Status of the Stripline Beam Position Monitor Development for the CLIC Drive Beam”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC12, pp. 384-387.
[n] S. Feng et al., “Application and comparative analysis of the APES_CBI module in BEPC-II experimental results”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1033-1035. doi:10.18429/JACoW-IPAC2024-TUPC14
[n] H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707.
For LaTeX
Use Complete Form
For BibTeX
References
- F. W. Jones and H. O. Sch?Ânauer, “A Method for Incorporating Image Forces in Multiparticle Tracking with Space Charge”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5B11, pp. 1381-1383.
- E. N. Shaposhnikova et al., “LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 992-995.
- V. F. Khan, A. D, A. Grudiev, R. M. Jones, W. Wuensch, and R. Zennaro, “Recent Progress on a Manifold Damped and Detuned Structure for CLIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE032, pp. 3425-3427.
- A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, and C. Mai, “Harmonic Off-Axis Seeding at the DELTA Short-Pulse Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 246-249.
- D. Krieg, T. J. Albert, S. Khan, and K. Sokolowski-Tinten, “Design Steps Towards an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1968-1971.
- H. Wang et al., “Injector Cavities Fabrication, Vertical Test Performance and Primary Cryomodule Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3551-3553.
- R. M. Jones, I. R. R. Shinton, and Z. Li, “Higher Order Modes in Coupled Cavities of the FLASH Module ACC39”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC125, pp. 2301-2303.
- D. C. Faircloth, S. R. Lawrie, T. Rutter, M. Whitehead, and T. Wood, “Initial Commissioning of the Rutherford Appleton Laboratory (RAL) Scaled Negative Penning Ion Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1314-1316.
- K. Yezza, H. Henke, and R. Lorenz, “Beam Position Monitor Developments for TESLA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1533-1536.
- G. V. Eremeev, W. A. Clemens, K. Macha, H. Park, and R. S. Williams, “Commissioning Results of Nb3Sn Cavity Vapor Diffusion Deposition System at JLab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3512-3514.
- B. Balhan et al., “Design and Construction of the CERN SPS Extraction Protection Elements for LIU”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2359-2362.
- V. F. Khan, R. Calaga, and A. Grudiev, “Investigation of a Ridge-loaded Waveguide Structure for CLIC X-band Crab Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO048, pp. 2411-2413.
- R. L. Geng et al., “Development of Ultra High Gradient and High Q0 Superconducting Radio Frequency Cavities”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO076, pp. 2474-2476.
- T. S. Chou and H. J. Halama, “Trapped Ions and Beam Lifetime in NSLS Storage Rings”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1773-1777.
- V. Tzoganis, A. Jeff, and C. P. Welsch, “Experimental Results of a Gas Jet Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3559-3562.
- B. B. D. Lomberg, A. Jeff, V. Tzoganis, and C. P. Welsch, “Simulations of the Ion Spatial Distribution in a Gas-Curtain Based Beam Profile Monitor”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3563-3565.
- N. Vinokurov et al., “Project of the Short Pulse Facility at KAERI”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO32, pp. 287-289.
- L. Dassa, D. Cambiaghi, and D. Perini, “Preliminary Design of the AEGIS Test Facility”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA051, pp. 190-192.
- D. C. Faircloth, S. R. Lawrie, T. Rutter, M. Whitehead, T. Wood, and V. G. Dudnikov, “Design of a Scaled High Duty Factor High Current Negative Penning Surface Plasma Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3956-3958.
- A. Neumann et al., “Booster Cavity and Fundamental Power Coupler Design Issues for BERLinPro”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2490-2492.
- W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC11, pp. 1021-1024.
- J. C. Brutus et al., “HIGH POWER FPC PROGRESS FOR EIC ESR CAVITIES”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP1321, this conference.
- G. Vandoni, M. Ady, M. A. Hermann, R. Kersevan, and D. T. Ziemianski, “Leak Propagation Dynamics for the HIE-ISOLDE Superconducting Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2351-2353.
- F. Sannibale et al., “APEX Phase-II Commissioning Results at the Lawrence Berkeley National Laboratory”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1041-1043.
- F. Galizzi, M. Caldara, and A. Jeff, “A Time-of-Flight Based Energy Measurement System for the LIGHT Medical Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4951-4953.
- T. S. Chou, “Surface Conditioning of Synchrotron Radiation Source to Improve Beam Lifetime”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3795-3797.
- L. R. Elias, “John Madey: A Short History of My Friend and Colleague”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 1-4.
- J. F. Schmidt and W. Hillert, “Studies on Depolarization by Synchrotron Radiation using Elegant Particle Tracking”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 695-697.
- M. Meddahi et al., “Status of the LHC Injectors Upgrade (LIU) Project at CERN”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3915-3918.
- N. Juntong, C. D. Beard, G. Burt, R. M. Jones, and I. R. R. Shinton, “RF Coupler Kicks and Wake-fields in SC Accelerating Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP085, pp. 2719-2721.
- D. Metin, A. Goldblatt, C. Vuitton, F. Roncarolo, M. Duraffourg, and M. Hamani, “Performance of Titanium, Tungsten, and Carbon as Beam Profile Monitor Materials”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 452-456.
- G. Vandoni, S. Blanchard, P. Chiggiato, and K. Radwan, “The HIE-Isolde Vacuum System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2372-2374.
- I. R. R. Shinton and R. M. Jones, “Large Scale Linac Simulations Using a Globalised Scattering Matrix Approach”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP034, pp. 619-621.
- S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 278-282.
- I. Mohos, J. Bojowald, J. Dietrich, and F. Klehr Forschungszentrum J??lich GmbH, “New Schottky-Pickup for COSY-J??lich”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS07, pp. XX-XX.
- N. Magnin et al., “Consolidation of Re-Triggering System of LHC Beam Dumping System at CERN”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 411.
- J.-F. Ostiguy, B. G. Shteynas, and N. Solyak, “Segmentation in the Project-X Low Energy CW Linac Front End”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS065, pp. 2649-2651.
- E. Kako et al., “Cryomodule Tests of the STF Baseline 9-cell Cavities at KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP131, pp. 868-870.
- H. D. Zhang, A. Jeff, V. Tzoganis, and C. P. Welsch, “Development of a Supersonic Gas-jet Monitor to Measure Beam Profile Non-destructively”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1157-1159.
- J. Hammer, M. Magrans de Abril, and C.-E. Wulz, “Interconnection Test Framework for the CMS Level-1 Trigger System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS001, pp. 973-976.
- M. V. Yurkov and E. Schneidmiller, “Coherence Limits of X-ray FEL Radiation”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 5-8.
- R. Lorenz and K. Yezza, “Test Results on a Beam Position Monitor Prototype for the TTF”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1536-1539.
- J.-F. Ostiguy and N. Solyak, “Residual Focusing Asymmetry in Superconducting Spoke Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS066, pp. 2652-2654.
- R. Spiwoks et al., “Run Control Communication for the Upgrade of the ATLAS Muon-to-Central Trigger Processor Interface (MUCTPI)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 571-574.
- R. Lorenz, “Measurement of the Beam Position in the TESLA Test Facility Linac”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP76, pp. 527-529.
- J. F. Schmidt and W. Hillert, “Magnetic Field Parametrization for Efficient Spin Tracking with POLE”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 808-810.
- V. F. Khan, W. Anders, A. Burrill, J. Knobloch, and A. Neumann, “High Power RF Input Couplers and Test Stand for the BERLinPro Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2487-2489.
- C. Priano et al., “CNAO Synchrotron Commissioning”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS007, pp. 2496-2498.
- A. Meyer auf der Heide, B. B??sing, S. Khan, D. Krieg, C. Mai, and F. Teutenberg, “The DELTA Short-Pulse Source: Upgrade Plans from CHG to EEHG”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1457-1460.
- I. R. R. Shinton et al., “Higher Order Modes in Third Harmonic Cavities for XFEL/FLASH”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC052, pp. 3007-3009.
- M. Olvegaard et al., “Overview of the ESSnuSB Accumulator Ring”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 105-109.
- M. Korostelev, I. R. Bailey, A. T. Herrod, A. Wolski, D. Stratakis, and V. Tishchenko, “Update on Bmad Simulations From Target to Storage Ring for the New Muon G-2 Experiment at Fermilab”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 791-794.
- C. R. Prior, G. H. Rees, and H. O. Sch?Ânauer, “Synchrotron-Based Proton Drivers for a Neutrino Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A06, pp. 963-965.
- M. J. Kumwenda et al., “Bremsstrahlung Photons Emission in 28-GHz Electron Cyclotron Resonance Plasma”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 219-222.
- V. F. Khan and R. M. Jones, “Wake-field Suppression in the CLIC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP089, pp. 2725-2727.
- S. Weisz, K. Foraz, H. Gaillard, and L. Lari, “Scheduling the Installation of the Large Hadron Collider”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT042, pp. 1927-1929.
- B. S. Lee, M. Won, J.-K. Ahn, and T. Nakagawa, “The Development Status of Compact Linear Accelerator in Korea”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP007, pp. 112-114.
- A. Benot-Morell et al., “Design and Characterization of a Prototype Stripline Beam Position Monitor for the CLIC Drive Beam”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA16, pp. 87-89.
- T. S. Chou, “Photon Stimulated Desorption of Neutral Species from Aluminum”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2286-2289.
- B. Autin et al., “A Slow-Cycling Proton Driver for a Neutrino Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A09, pp. 966-968.
- A. Hershcovitch et al., “Novel Apparatus and Technique for Measuring RR Resistivity of Tube Coatings at Cryogenic Temperatures”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4304-4306.
- T. Kamps, R. Lorenz, and S. De Santis, “Microwave Characterization of the Waveguide BPM”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA83, pp. 2075-2077.
- D. Filippetto et al., “Low Energy Beam Diagnostic for APEX, the LBNL VHF Photo-injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP222, pp. 1903-1905.
- M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
- D. Krieg, S. Khan, and K. Sokolowski-Tinten, “First Conceptual Design Studies of an Electron Source for Ultrafast Electron Diffraction at DELTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4530-4533.
- K. Hatanaka et al., “The RCNP Atomic Beam Source”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-06, pp. 389-392.
- M. Di Castro, M. L. Baiguera Tambutti, S. S. Gilardoni, R. Losito, G. Lunghi, and A. Masi, “LHC Train Control System for Autonomous Inspections and Measurements”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1507-1511.
- A. Jeff, A. Benot-Morell, M. Caldara, and P. Nadig, “A Diagnostic Test Bench for the LIGHT Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1808-1811.
- M. Bai, M. Blaskiewicz, A. Lehrach, T. Roser, W. van Asselt, and F. Schmidt, “Measurement of Non-Linearities Using Spectrum Analysis of Driven Betatron Oscillation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH301, pp. 2041-2043.
- W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2414-2417.
- A. Benot-Morell, A. Faus-Golfe, M. Wendt, J. M. Nappa, and S. Vilalte, “Beam Tests of a Prototype Stripline Beam Position Monitoring System for the Drive Beam of the CLIC Two-beam Module at CTF3”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 270-272.
- M. Chen et al., “Field Measurements of the ESR Magnets”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1142-1145.
- E. Plouviez et al., “Broadband Bunch by Bunch Feedback for the ESRF using a Single High Resolution and Fast Sampling FPGA DSP”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH082, pp. 2976-2978.
- V. Namora et al., “Eradication of Mercury Ignitron from the 400 kA Magnetic Horn Pulse Generator for CERN Antiproton Decelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2586-2588.
- H.-D. Nuhn et al., “Undulator Radiation Damage Experience at LCLS”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP046, pp. 127-130.
- E. Plouviez and N. Michel, “Cleaning of Parastic Bunches in the ESRF Booster Synchrotron for Time Structure Modes of Operation”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF032, pp. 2341-2343.
- S. Park et al., “Electron Bunch Length Measurement using an RF Deflecting Cavity”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 188-190.
- B. Autin et al., “Design of a 2.2 GeV Accumulator and Compressor for a Neutrino Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B07, pp. 921-923.
- J. Ungrin et al., “IMPELA: An Industrial Accelerator Family”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1515-1518.
- A. Benot-Morell et al., “Status of the Stripline Beam Position Monitor Development for the CLIC Drive Beam”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC12, pp. 384-387.
- S. Feng et al., “Application and comparative analysis of the APES_CBI module in BEPC-II experimental results”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC14, pp. 1033-1035.
- H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707.
Back to search