JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Xu et al., “Progress in the development of the cryomodules for CSNS-II superconducting linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 212-215. doi:10.18429/JACoW-LINAC2024-MOPB077
[n]	P. Chevtsov, F. Mueller, V. Schlott, D. M. Treyer, P. Peier, and B. Steffen, “Electro Optical Beam Diagnostics System and its Control at PSI”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS019, pp. 195-198. 
[n]	A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n]	E. D. Matias, L. Baribeau, T. Batten, J. W. Li, and W. A. Wurtz, “Achieving a Successful Alarm Management Deployment ÔÇô The CLS Experience”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB06, pp. 1062-1065. 
[n]	P. Chevtsov et al., “Current Status and Perspectives of the SwissFEL Injector Test Facility Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC112, pp. 378-380. 
[n]	Z. Qazi, A. Ismail, I. Saleh, P. Betinelli-Deck, and M. T. Heron, “Design and Implementation of Sesame's Booster Ring Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC104, pp. 352-355. 
[n]	E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256. 
[n]	E. Lecorche et al., “Development of the Future Spiral2 Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP076, pp. 257-259. 
[n]	E. Lecorche et al., “The Spiral2 Control System Progress Towards the Commission Phase”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOAAB03, pp. 8-11. 
[n]	D. Manglunki et al., “Ions for LHC: Status of the Injector Chain”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA084, pp. 226-228. 
[n]	P. Sjöblom, A. Milan-Otero, and A. G. Persson, “Multiplexer for the Em# Electrometer”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1548-1551. doi:10.18429/JACoW-ICALEPCS2017-THPHA070
[n]	G. Bisoffi et al., “A Cost-Effective Energy Upgrade of the ALPI Linac at INFN-Legnaro”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUA02, pp. 106-111. 
[n]	C. Engblom et al., “Overview of Some Feedback & Control Systems at Synchrotron Soleil”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 132-136. doi:10.18429/JACoW-PCAPAC2016-FRFMPLIO03
[n]	P. J. Bell, V. H. Hardion, and V. Michel, “100Hz Data Acquisition in the TANGO Control System at the Max IV Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 209-211. doi:10.18429/JACoW-ICALEPCS2015-MOPGF049
[n]	M. Dach et al., “Control System in SwissFEL Injector Test Facility”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST03, pp. 593-596. 
[n]	E. D. Matias, L. Baribeau, S. Hu, C. G. Payne, and H. Zhang, “Upgrade of the CLS Accelerator Control and Instrumentation Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU036, pp. 518-521. 
[n]	R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33. 
[n]	C. Engblom et al., “Nanoprobe Results: Metrology & Control in Stacked Closed-Loop Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1028-1033. doi:10.18429/JACoW-ICALEPCS2017-WEAPL04
[n]	T. Korhonen et al., “Modern Technology in Disguise”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB05, pp. 1032-1035. 
[n]	T. Papaevangelou et al., “ESS nBLM: Beam Loss Monitors based on Fast Neutron Detection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 404-409. doi:10.18429/JACoW-HB2018-THA1WE04
[n]	F. Frei et al., “Experimental Results of Diagnostics Response for Longitudinal Phase Space”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THB02, pp. 657-662. 
[n]	B. Steffen, P. Chevtsov, F. M??ller, and V. Schlott, “Electro Optical Sampling of Coherent Synchrotron Radiation for Picosecond Electron Bunches With Few pC Charge”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WECNB02, pp. 538-542. 
[n]	E. D. Matias, “A Rational Approach to Control System Development Projects That Incorporates Risk Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOBAB05, pp. 513-516. 
[n]	F. Yan et al., “Development of the C-ADS SRF Accelerator at IHEP”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 19-23. doi:10.18429/JACoW-SRF2017-MOXA07
[n]	C. Yang et al., “Self Seeding Scheme for LCLS-II-HE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4414-4417. doi:10.18429/JACoW-IPAC2018-THPMK055
[n]	H. Wang et al., “Overall Design of Magnet Girder System for Heps-Tf”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2383-2385. doi:10.18429/JACoW-IPAC2016-WEPMR047
[n]	C. H. Chen et al., “Bunch Length Measurements with a Streak Camera in Low Alpha Lattice Operation at the TPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2316-2319. doi:10.18429/JACoW-IPAC2018-WEPAL062
[n]	R. Zennaro et al., “High Power Tests of a Prototype X-Band Accelerating Structure for CLIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4318-4320. doi:10.18429/JACoW-IPAC2017-THPIK097
[n]	I. Kaganovich, R. C. Davidson, E. Startsev, A. Friedman, and S. Massidda, “Effects of Errors of Velocity Tilt on Maximum Longitudinal Compression During Neutralized Drift Compression of Intense Beam Pulses”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP296, pp. 2038-2040. 
[n]	R. H. Iverson et al., “Recent LCLS Performance From 250 to 500 eV”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO27, pp. 554-556. 
[n]	M. Mori et al., “Stabilization of Laser Accelerated Electron Bunch by the Ionization-stage Control”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC003, pp. 4062-4064. 
[n]	P. Dahl et al., “Performance of Four 4.5m Two-in-One Superconducting R&D Dipoles for the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3675-3678. 
[n]	M. Gu et al., “The Operation of Injection System in the SSRF”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC031, pp. 1788-1789. 
[n]	N. M. Cook et al., “High-Fidelity Three-Dimensional Simulations of Thermionic Energy Converters”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 59-63. doi:10.18429/JACoW-ICAP2018-SUPAF07
[n]	G. Westenskow et al., “A Chopper Driven 11.4-GHz Traveling-Wave RF Generator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 646-649. 
[n]	M. Ben Abdillah et al., “Development of the Beam Position Monitors for the SPIRAL2 Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA18, pp. 374-377. 
[n]	A. Laxdal et al., “Recirculated Electron Beam in Photo-Converter for Rare Isotope Production”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2526-2529. doi:10.18429/JACoW-IPAC2017-WEOBB1
[n]	P. Mandrillon, R. Barjon, J. M. Filhol, C. M. Lalanne, and J. P. Meulders, “MEDICYC: A 60 MeV Proton Cyclotron Associated with a New Target Design for Neutrontherapy”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J43, pp. 475-478. 
[n]	A. V. Shemyakin et al., “Status of the Warm Front End of PIP-II Injector Test”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2421-2424. doi:10.18429/JACoW-IPAC2017-TUPVA138
[n]	J.-L. Lemaire, A. B. Binet, A. B. Bloquet, D. Guilhem, V. Le Flanchec, and S. Pichon, “Comparison between Simulations and Measurements of Low Charge Electron Bunch in the ELSA Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH006, pp. 1927-1929. 
[n]	C. Curatolo, L. Serafini, M. W. Krasny, and W. Placzek, “New Simulation Programs for Partially Stripped Ions - Laser Light Collisions”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4249-4251. doi:10.18429/JACoW-IPAC2018-THPMF076
[n]	S. Kashiwagi, T. Asaka, G. Isoyama, R. Kato, Y. Kawashima, and S. Suemine, “New Timing System for the L-band Linear Accelerator at Osaka University”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA067, pp. 208-210. 
[n]	Y. Yu et al., “The X-Band Linear Compression System in Dalian Coherent Light Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 625-628. doi:10.18429/JACoW-FEL2019-THP015
[n]	L. G. Zhang, J. Huang, K. F. Liu, J. Yang, and C. Zuo, “Electron Beam Uniformity Detection Device for Irradiation Accelerators”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 101-103. doi:10.18429/JACoW-IBIC2015-MOPB031
[n]	T. Hakulinen et al., “Personnel Protection of the CERN SPS North Hall in Fixed Target Primary Ion Mode”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB06, pp. 66-69. 
[n]	P. J. Spiller et al., “Status of the FAIR Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 63-68. doi:10.18429/JACoW-IPAC2018-MOZGBF2
[n]	A. Sukhanov, K. A. Brown, C. W. Dawson, J. P. Jamilkowski, A. Marusic, and J. Morris, “Processing of the Schottky Signals at RHIC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1327-1329. doi:10.18429/JACoW-ICALEPCS2017-THMPA08
[n]	M. Wendt et al., “Beam Based HOM Analysis of Acceleating Structures at the TESLA Test Facility LINAC”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT11, pp. XX-XX. 
[n]	M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89. 
[n]	G. B. M. Bruno et al., “Open Hardware Experience on LNLS' Beam Diagnostics”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 75-79. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO04
[n]	G. Vorobjev et al., “Diagnostic Scheme for the HITRAP Decelerator”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD05, pp. 311-313. 
[n]	M. Wendt et al., “High Resolution BPMs with Integrated Gain Correction System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD19, pp. 89-91. 
[n]	P. P. Goryl et al., “Solaris Project Status and Challenges”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU008, pp. 439-441. 
[n]	M. Lindberg et al., “Motion Control on the Max IV Soft X-Ray Beamlines With Tango and Sardana”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 240-243. doi:10.18429/JACoW-ICALEPCS2015-MOPGF065
[n]	A. S. Aryshev et al., “Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP023, pp. 3997-3999. 
[n]	R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41. 
[n]	J. Rose and N. A. Towne, “Bunch Lengthening Harmonic System for NSLS-II”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP152, pp. 904-906. 
[n]	O. Chorniy, H. Br?ñuning, T. Hoffmann, H. Reeg, and A. Reiter, “A FESA DAQ for Fast Current Transformer in SIS 18”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF31, pp. 894-896. 
[n]	G. M. Wang, B. Holub, Y. Li, J. Rose, and T. V. Shaftan, “Characterization of the Longitudinal Acceptance in a Storage Ring with RF Pinger”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 497-499. doi:10.18429/JACoW-IPAC2017-MOPAB155
[n]	L. Serafini et al., “The PLASMONX Project for Advanced Beam Physics Experiments”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS021, pp. 2439-2441. 
[n]	M. Krasilnikov et al., “Development of a Photo Cathode Laser System for Quasi Ellipsoidal Bunches at PITZ”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO39, pp. 303-308. 
[n]	A. Zelenski et al., “High-Intensity, High-Brightness Polarized and Unpolarized Beam Production in Charge- Exchange Collisions”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROAN3, pp. 2555-2557. 
[n]	J. A. Crittenden et al., “Developments for Cornell's X-Ray ERL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO4PBC03, pp. 106-108. 
[n]	Y. Kadi et al., “Progress on the HIE-ISOLDE Facility”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOM1I01, pp. XX-XX. 
[n]	B. Farnham et al., “A Movement Control System for Roman Pots at the LHC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC025, pp. 115-118. 
[n]	G. Franchetti, I. Hofmann, and S. Machida, “Towards the Description of Long Term Self Consistent Effects in Space Charge Induced Resonance Trapping”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA2IS03, pp. 65-69. 
[n]	V. J. Miller Kamm et al., “Software Tool Leverages Existing Image Analysis Results to Provide In-Situ Transmission of the NIF Disposable Debris Shields”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC083, pp. 1270-1273. 
[n]	A. Bonatto, R. Pakter, and F. B. Rizzato, “Nonlinear Propagation of Laser Pulses in Plasmas: a Comparison between Numerical and Analytical Solutions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD033, pp. 4349-4351. 
[n]	J. J. Jamroz, P. J. Bell, J. Lidon-Simon, P. Sjöblom, and D. P. Spruce, “Preliminary Scanning Integration at MAX IV Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1688-1691. doi:10.18429/JACoW-ICALEPCS2017-THPHA132
[n]	G. M. Wang, B. Holub, Y. Li, J. Rose, T. V. Shaftan, and V. V. Smaluk, “Experiments of Lossless Crossing - Resonance With Tune Modulation by Synchrotron Oscillations”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1036-1038. doi:10.18429/JACoW-NAPAC2016-WEPOB65
[n]	I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92. 
[n]	D. Lipka et al., “FLASH Undulator BPM Commissioning and Beam Characterization Results”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF07, pp. 315-319. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search