Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Heilmann et al., “Scaled Alvarez-Cavity Model Investigations for the UNILAC Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 916-919. doi:10.18429/JACoW-IPAC2018-TUPAF079
[n] S. Jummunt et al., “Beam dynamics studies for the SPS-II 3-GeV booster synchrotron with 270-MeV linac injector”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5626, unpublished.
[n] E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1259-1262.
[n] F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
[n] R. Spirin, F. Cardoso, G. Cruz, G. Ricioli, M. Donatti, and P. Nallin, “A remote-controlled high voltage power supply using open-source firmware modules”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 655-660. doi:10.18429/JACoW-ICALEPCS2025-TUPD067
[n] S. Klinkhieo, T. Chanwattana, S. Chunjarean, T. Pulampong, and N. Suradet, “A sliding mode control approach for photon beam stability at the Siam Photon Source”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6673, unpublished.
[n] S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3927-3932. doi:10.18429/JACoW-IPAC2024-FRXN3
[n] H. P. Bohlen, “Advanced High-Power Microwave Vacuum Electron Device Development”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBL3, pp. 445-449.
[n] R. Miracoli et al., “Characterization of ECR Plasma by Means of Radial and Axial X-Ray Diagnostics”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 111-114. doi:10.18429/JACoW-ECRIS2018-TUP13
[n] Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
[n] L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 472-475. doi:10.18429/JACoW-LINAC2024-TUPB071
[n] C. Pillai et al., “Performance of the LANSCE H$^-$ Source and Low Energy Beam Transport at Higher Peak Current”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W021, pp. 2743-2745.
[n] M. Formela et al., “Status of hydrodynamic simulations of a tapered plasma lens for optical matching at the ILC e+ source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 364-367. doi:10.18429/JACoW-IPAC2023-MOPA132
[n] J. W. Staples and B. A. Ludewigt, “Modeling and System Specifications for an Integrated 3-D Proton Treatment Delivery System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1759-1762.
[n] G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
[n] T. F. G??nzel, L. Farvacque, T. Perron, and J.-L. Revol, “Evolution of the Machine Impedance following the ESRF Upgrade to Low-Gap NEG Coated Aluminium Chambers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP021, pp. 1712-1714.
[n] M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source for Canada”, presented at the IPAC'26, Deauville, France, May 2026, paper THP4304, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Heilmann et al., “Scaled Alvarez-Cavity Model Investigations for the UNILAC Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 916-919.
- S. Jummunt et al., “Beam dynamics studies for the SPS-II 3-GeV booster synchrotron with 270-MeV linac injector”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5626, this conference.
- E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1259-1262.
- F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
- R. Spirin, F. Cardoso, G. Cruz, G. Ricioli, M. Donatti, and P. Nallin, “A remote-controlled high voltage power supply using open-source firmware modules”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 655-660.
- S. Klinkhieo, T. Chanwattana, S. Chunjarean, T. Pulampong, and N. Suradet, “A sliding mode control approach for photon beam stability at the Siam Photon Source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6673, this conference.
- S. Redaelli et al., “Crystal collimation of heavy-ion beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXN3, pp. 3927-3932.
- H. P. Bohlen, “Advanced High-Power Microwave Vacuum Electron Device Development”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THBL3, pp. 445-449.
- R. Miracoli et al., “Characterization of ECR Plasma by Means of Radial and Axial X-Ray Diagnostics”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 111-114.
- Y. Li, H. P. Bohlen, and R. N. Tornoe, “IOT RF Power Sources for Pulsed and CW Linacs”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TH201, pp. 574-577.
- L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 472-475.
- C. Pillai et al., “Performance of the LANSCE H$^-$ Source and Low Energy Beam Transport at Higher Peak Current”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W021, pp. 2743-2745.
- M. Formela et al., “Status of hydrodynamic simulations of a tapered plasma lens for optical matching at the ILC e+ source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA132, pp. 364-367.
- J. W. Staples and B. A. Ludewigt, “Modeling and System Specifications for an Integrated 3-D Proton Treatment Delivery System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1759-1762.
- G. Wu et al., “ECR Plasma Cleaning: An In-situ Processing Technique for RF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP49, pp. XX-XX.
- T. F. G??nzel, L. Farvacque, T. Perron, and J.-L. Revol, “Evolution of the Machine Impedance following the ESRF Upgrade to Low-Gap NEG Coated Aluminium Chambers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP021, pp. 1712-1714.
- M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source for Canada”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP4304, this conference.
Back to search