Favourites
For Word
[n] F. F. Wu et al., “Design and Simulation of the Stripline Transverse Quadrupole Kicker for HLS II”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP064, pp. 2852-2854.
[n] S. M. Lidia and S. S. Yu, “Stability of Modulated Beam Transport in Relativistic Klystron Two-Beam Accelerators”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP132, pp. 1800-1802.
[n] M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4967-4970. doi:10.18429/JACoW-IPAC2023-THPM035
[n] S. H. Kim, D. W. Carnegie, C. Doose, R. Hogrefe, K. Kim, and R. Merl, “Statistical Analyses of the Magnet Data for the Advanced Photon Source Storage Ring Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE08, pp. 1310-1315.
[n] S. Siddique, J. Pretz, A. Lehrach, and C. Carli, “Simulations of beam dynamics and beam lifetime for the prototype EDM ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2383-2386. doi:10.18429/JACoW-IPAC2023-TUPM078
[n] N. Us Saqib, H. Huang, and M. Lopez, “Upgrading the ALS beamline equipment protection system: software development and implementation”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 594-597. doi:10.18429/JACoW-ICALEPCS2025-TUPD032
[n] E. Baron and Ch. Ricaud, “Beam Foil Interaction Studies for the Future Stripper of GANIL”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 839-842.
[n] H. Asano et al., “Operating Experience of the J-PARC Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP004, pp. 55-57.
[n] X. J. Wang and X. Y. Chang, “Beam Dynamics Studies for a L-band Photoinjector”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI068, pp. 1825-1827.
[n] A. Khaleghi, M. Akbari, H. H. Haedar, and K. Mahmoudi, “Key Factors and Drivers for Utilizing Machine Learning in Experimental Data Analysis: A Case Study of Synchrotron Experimental Data”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper WEP044, unpublished.
[n] I. Chernyavskiy, A. Vlasov, and T. Antonsen, “Modeling of single-beam and multiple-beam klystrons by the TESLA-family of large-signal codes”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR34, unpublished.
[n] H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n] G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
[n] D. Tupa, R. L. York, D. R. Swenson, and R. Damjanovich, “Volume H- Ion Source Development at LAMPF”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3175-3178.
[n] F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
[n] T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2510-2513. doi:10.18429/JACoW-IPAC2023-TUPM122
[n] Y. Liu, J. Tong, and Q. Yuan, “EMI measurement for SXFEL klystron-modulator system”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS34, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- F. F. Wu et al., “Design and Simulation of the Stripline Transverse Quadrupole Kicker for HLS II”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP064, pp. 2852-2854.
- S. M. Lidia and S. S. Yu, “Stability of Modulated Beam Transport in Relativistic Klystron Two-Beam Accelerators”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP132, pp. 1800-1802.
- M. Mayerhofer, J. Mitteneder, C. Wittig, I. Prestes, E. Jägle, and G. Dollinger, “First high quality DTL cavity additively manufactured from pure copper”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM035, pp. 4967-4970.
- S. H. Kim, D. W. Carnegie, C. Doose, R. Hogrefe, K. Kim, and R. Merl, “Statistical Analyses of the Magnet Data for the Advanced Photon Source Storage Ring Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE08, pp. 1310-1315.
- S. Siddique, J. Pretz, A. Lehrach, and C. Carli, “Simulations of beam dynamics and beam lifetime for the prototype EDM ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM078, pp. 2383-2386.
- N. Us Saqib, H. Huang, and M. Lopez, “Upgrading the ALS beamline equipment protection system: software development and implementation”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 594-597.
- E. Baron and Ch. Ricaud, “Beam Foil Interaction Studies for the Future Stripper of GANIL”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 839-842.
- H. Asano et al., “Operating Experience of the J-PARC Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP004, pp. 55-57.
- X. J. Wang and X. Y. Chang, “Beam Dynamics Studies for a L-band Photoinjector”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI068, pp. 1825-1827.
- A. Khaleghi, M. Akbari, H. H. Haedar, and K. Mahmoudi, “Key Factors and Drivers for Utilizing Machine Learning in Experimental Data Analysis: A Case Study of Synchrotron Experimental Data”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP044, unpublished.
- I. Chernyavskiy, A. Vlasov, and T. Antonsen, “Modeling of single-beam and multiple-beam klystrons by the TESLA-family of large-signal codes”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR34, unpublished.
- H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 363-366.
- G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
- D. Tupa, R. L. York, D. R. Swenson, and R. Damjanovich, “Volume H- Ion Source Development at LAMPF”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3175-3178.
- F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585.
- T. G. Banks et al., “Design development and R&D for CERN’s HL-LHC external beam dump”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM122, pp. 2510-2513.
- Y. Liu, J. Tong, and Q. Yuan, “EMI measurement for SXFEL klystron-modulator system”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS34, unpublished.
Back to search
