JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Takeda, T. Itoh, and K. Tada, “Ground Motion Studies near the Dam Site”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI117, pp. 2661-2663. 
[n]	N. A. Huque, E. Daly, and M. W. McGee, “LCLS-II Cryomodule Transport System Testing”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 317-322. doi:10.18429/JACoW-SRF2017-MOPB109
[n]	Skelly J.F., Morris J.T., “Design, Evolution and Impact of the AGS/RHIC Control System”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P05, pp. XX-XX. 
[n]	G. Vashchenko et al., “Optimization of the Transverse Projected Emittance of the Electron Beam at PITZ”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD60, pp. 185-188. 
[n]	P. Berrutti, T. N. Khabiboulline, L. Ristori, N. Solyak, and V. P. Yakovlev, “Single Spoke Resonator Inner Electrode Optimization Driven by Reduction of Multipoles”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC22, pp. 835-837. 
[n]	P. Budz et al., “The Magnets of the Metrology Light Source in Berlin-Adlershof”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS013, pp. 3296-3298. 
[n]	G. J. Mahler, S. J. Brooks, and S. M. Trabocchi, “From Start to Finish: Using 3D Printing Techniques to Build CBETA”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 263-266. doi:10.18429/JACoW-NAPAC2019-MOPLO14
[n]	J. V?Âlker et al., “A Superconducting Magnetic Shield for the Photoelectron Injector of BERLinPro”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 335-339. doi:10.18429/JACoW-SRF2019-MOP105
[n]	Tadamichi KAWAKUBO, Tadaharu ISHIDA, Hiroshi YAMAGUCHI, “HIGH COST-PERFORMANCE FAST-RESPONSE BEAM-LOSS MONITOR USING A PHOTO-MULTIPLIER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP025, pp. XX-XX. 
[n]	R. L. Poirier et al., “Construction Criteria and Prototyping for the ISAC RFQ Accelerator at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W029, pp. 1105-1107. 
[n]	A. Sublet et al., “Developments on SRF Coatings at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB027, pp. 617-621. 
[n]	M. Satoh et al., “Control System Upgrade for SuperKEKB Injector Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 930-932. doi:10.18429/JACoW-IPAC2015-MOPHA059
[n]	K. Fan, K. Ishii, H. Matsumoto, N. Matsumoto, T. Sugimoto, and T. Shibata, “Upgrade of J-PARC Fast Extraction System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 821-823. doi:10.18429/JACoW-IPAC2014-MOPRI089
[n]	K.Y.Ng, C.L.Bohn, “THEORY OF CUMULATIVE BEAM-BREAKUP WITH BNS DAMPING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEBU02, pp. XX-XX. 
[n]	J. J. Welch, “X-Ray Diagnostics Commissioning at the LCLS”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROAI1, pp. 705-705. 
[n]	Kenji Mishima, Kuninori Endo, Takehiko Ishii, Masumi Sugawara, Weerapong Pairsuwan, “SURVEY AND ALIGNMENT FOR THE SIAM PHOTON PROJECT”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEDM05, pp. XX-XX. 
[n]	HE Chao-hui, YANG Hai-liang, GENG Bin, CHEN Xiao-hua, ZHANG Zheng-xuan, LI Guo-zheng, “EXPERIMENTAL STUDY ON SINGLE EVENT EFFECTS IN SEMICONDUCTOR DEVICES USING ACCELERATORS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP081, pp. XX-XX. 
[n]	X. Sun and R. M. Lill, “The RF BPM Pickup Electrodes Development for the APS-MBA Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 256-258. doi:10.18429/JACoW-NAPAC2019-MOPLO12
[n]	G. E. Boorman et al., “Characterising the Signal Processing System for Beam Position Monitors at the Front End Test Stand”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 526-529. doi:10.18429/JACoW-IBIC2015-TUPB073
[n]	T. Kawakubo, “New Current Septum Magnet used for Beam Injection and Extraction in Ultra-High Vacuum System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3989-3992. 
[n]	Eiichi KADOKURA , Shuichi NOGUCHI, “BEAM OPERATION AND SAFETY SYSTEM FOR THE PROTON LINAC OF THE JAERI/KEK JOINT PROJECT”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP052, pp. XX-XX. 
[n]	F.Zimmermann and G.Rumolo, “TWO-STREAM PROBLEMS IN ACCELERATORS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEBU01, pp. XX-XX. 
[n]	F. Sannibale, “First Results of the DAFNE Injection System Commissioning”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP042G, pp. 551-553. 
[n]	N.I.Aizatsky, A.N.Dovbnya, V.V.Zakutin, N.G.Reshetnyak, V.P.Romas'ko,Yu.Ya.Volkolupov, M.A.Krasnogolovets, “GENERATION OF ELECTRON BEAMS IN MAGNETRON GUNS WITH SECONDARY EMISSION CATHODES OF A SMALL DIAMETER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP081, pp. XX-XX. 
[n]	F. Bouly, M. Di Giacomo, J. F. Leyge, and M. Tontayeva, “Superconducting Cavity and RF Control Loop Model for the SPIRAL2 Linac”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 767-770. doi:10.18429/JACoW-LINAC2022-THPOPA13
[n]	Masaki Tejima, Kotaro Satoh, Makoto Tobiyama, “BEAM POSITION MONITOR SYSTEM FOR THE ORBIT FEEDBACK AT THE INTERACTION REGION OF KEKB”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP060, pp. XX-XX. 
[n]	D. R. Broemmelsiek and S. Nagaitsev, “Antiproton Momentum Distributions as a Measure of Electron Cooling Force at the Fermilab Recycler”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH098, pp. 1241-1243. 
[n]	J. K. Pozimski and S. M. Gibson, “Particle Tracking for the FETS Laser Wire Emittance Scanner”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF05, pp. 503-506. 
[n]	A. Chao, Z. Huang, and D. F. Ratner, “Enhancing FEL Power with Phase Shifters”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH023, pp. 69-72. 
[n]	D. Dimitrov et al., “Modeling optical interference effects for optimization of electron emission properties from thin film semiconductor photocathodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1378-1381. doi:10.18429/JACoW-IPAC2023-TUPA012
[n]	R. Huang, D. Filippetto, C. F. Papadopoulos, and F. Sannibale, “Dark Current Studies at the APEX Photoinjector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP054, pp. 855-858. 
[n]	Y.Ogawa,A.Enomoto,Y.Funakoshi,K.Furukawa,T.Honda,N.Iida,N.Kamikubota,T.Kamitani,E.Kikutani,M.Kikuchi,H.Kobayashi,H.Koiso,T.Matsumoto,Y.Ohnishi,S.Ohsawa,K.Oide, “TWO-BUNCH OPERATION OF THE KEKB LINAC FOR DOUBLING THE POSITRON INJECTION RATE TO THE KEKB RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP004, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search