Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Marchetti et al., “X-Band TDS Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 184-187. doi:10.18429/JACoW-IPAC2017-MOPAB044
[n] J. R. Delayen and H. Wang, “Design of Superconducting Parallel Bar Deflecting and Crabbing RF Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP053, pp. 2120-2122.
[n] P. J. Phillips et al., “Single Shot Longitudinal Bunch Profile Measurements by Temporally Resolved Electro-Optical Detection”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO2A02, pp. 221-223.
[n] L. M. Bobb, N. Chritin, T. Lefevre, M. G. Billing, and V. Karataev, “UV/X-ray Diffraction Radiation for Non-intercepting Micron-scale Beam Size Measurement”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCC01, pp. 24-28.
[n] K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
[n] L. Shi et al., “Dielectric Waveguide-Based THz Radiator Study for SwissFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 94-97. doi:10.18429/JACoW-LINAC2018-MOPO034
[n] M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289.
[n] J. M. Weber, M. J. Chin, C. Steier, and E. C. Williams, “ALS FPGA-Based Digital Power Supply Controller for Ramped Power Supplies in the Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP009, pp. 1550-1552.
[n] T. H. Luo et al., “Progress on the MICE RF Module at LBNL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 454-456. doi:10.18429/JACoW-IPAC2016-MOPMW028
[n] E. C. Williams et al., “New EPICS Display Manager in WPF”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP101, pp. 877-879.
[n] M. Sapinski et al., “Ionization Profile Monitor Simulations - Status and Future Plans”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 520-523. doi:10.18429/JACoW-IBIC2016-TUPG71
[n] J. Qiang, S. Paret, K. Ohmi, and T. Pieloni, “Strong-Strong Beam-Beam Simulation of Bunch Length Splitting at the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2210-2213. doi:10.18429/JACoW-IPAC2015-TUPTY077
[n] C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2650-2653. doi:10.18429/JACoW-IPAC2019-WEPGW076
[n] T. Hofmann et al., “Design of a Laser-based Profile Monitor for LINAC4 Commissioning at 50 MeV and 100 MeV”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 451-455. doi:10.18429/JACoW-IBIC2015-TUPB055
[n] R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467.
[n] Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
[n] F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3486-3489.
[n] F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
[n] E. W. Nissen and T. Satogata, “Revised Optics Design for the JLEIC Ion Booster”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3537-3539. doi:10.18429/JACoW-IPAC2018-THPAK126
[n] M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636.
[n] V. R. Arsov et al., “Commissioning and Results from the Bunch Arrival-time Monitor Downstream the Bunch Compressor at the SwissFEL Test Injector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP085, pp. 933-936.
[n] T. Eriksson et al., “AD Status and Consolidation Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA02, pp. 36-39.
[n] D. Zhou, Y. H. Chin, K. Ohmi, and G. V. Stupakov, “Calculation of Coherent Wiggler Radiation using Eigenfunction Expansion Method”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR054, pp. 3048-3050.
[n] T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977.
[n] A. Seryi et al., “Accelerator Design Educational Primer – Conceptualizing and Optimizing the Hybrid LHeC-like Electron-Ion Collider Design”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV1301, unpublished.
[n] G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64.
[n] B. Schlitt, M. Hoerr, A. Schnase, G. Schreiber, and W. Vinzenz, “RF System Development for the New 108 MHz Heavy Ion High-Energy Linac at GSI”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP058, pp. 556-558.
[n] P. Belochitskii, “ELENA Project Status”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
[n] A. Fiebig, R. Hohbach, P. Marchand, and J. O. Pearce, “Design Considerations, Construction and Performance of a Sled-Type Radiofrequency Pulse Compressor Using Very High 0 Cylindrical Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1931-1934.
[n] T. H. Luo, A. J. DeMello, A. R. Lambert, D. Li, S. Prestemon, and S. P. Virostek, “Progress on the MICE 201 MHz Cavities at LBNL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3378-3380. doi:10.18429/JACoW-IPAC2015-WEPTY046
[n] L. Teofili et al., “Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3444-3447. doi:10.18429/JACoW-IPAC2018-THPAK091
[n] J. R. Cary, “High-Performance Self-Consistent Electromagnetic Modeling of Beams”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOAPMP02, pp. 74-74.
[n] R. Hohbach, E. Jensen, A. K. Mitra, and R. L. Poirier, “Higher Order Mode Damping of the CERN PS 40 MHz Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP093L, pp. 2068-2070.
[n] S. S. Gilardoni et al., “The PS Upgrade Programme: Recent Advances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA042, pp. 2594-2596.
[n] N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “The Mode Matching Method Applied to Beam Coupling Impedance Calculations of Finite Length Devices”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR062, pp. 3069-3071.
[n] S. R. Lawrie, A. P. Letchford, J. K. Pozimski, and P. Savage, “Simulations to Flatten the Field of the FETS RFQ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC061, pp. 223-225.
[n] J. C. Herrera, C. Lasky, and M. Month, “AGS Low Field Correction Elements”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 425-431.
[n] R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41.
[n] K. Kubo, “Beam Development in ATF Damping Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP03D, pp. 469-471.
[n] L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2781-2783. doi:10.18429/JACoW-IPAC2016-WEPOR050
[n] G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2789-2793. doi:10.18429/JACoW-IPAC2014-THYA01
[n] A. Lal, K. Wharton, D. Gordon, M. J. Everett, C. E. Clayton, and C. Joshi, “Measurements of the Beatwave Dynamics in Time and Space”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB04, pp. 767-769.
[n] H. J. Qian et al., “Design of a 1.3 GHz Two-cell Buncher for APEX”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3924-3926. doi:10.18429/JACoW-IPAC2014-THPRI066
[n] R. J. Ducar, “A CAMAC Serial Crate Controller for the Tevatron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2303-2305.
[n] S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 407-409. doi:10.18429/JACoW-IPAC2022-MOPOPT063
[n] D. Alves, “Estimation of Longitudinal Profiles of Ion Bunches in the LHC Using Schottky-Based Diagnostics”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 45-49. doi:10.18429/JACoW-IBIC2019-MOCO03
[n] J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
[n] A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Horizontal Emittance Regulation at SIBERIA-2”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC13, pp. 347-349.
[n] M. H. Oruganti, B. Naranjo, J. B. Rosenzweig, and M. Yadav, “Comparing Methods of Recovering Gamma Energy Distributions from PEDRO Spectrometer Responses”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1784-1786. doi:10.18429/JACoW-IPAC2022-WEPOST040
[n] A. Neumann et al., “The BERLinPro SRF Photoinjector System - From First RF Commissioning to First Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1660-1663. doi:10.18429/JACoW-IPAC2018-TUPML053
[n] R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2301-2303.
[n] G. Schiwietz, J. G. Hwang, M. Koopmans, and M. Ries, “Overview of Bunch-Resolved Diagnostics for the Future BESSY VSR Electron-Storage Ring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 50-54. doi:10.18429/JACoW-IBIC2019-MOCO04
[n] J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Marchetti et al., “X-Band TDS Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 184-187.
- J. R. Delayen and H. Wang, “Design of Superconducting Parallel Bar Deflecting and Crabbing RF Structures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP053, pp. 2120-2122.
- P. J. Phillips et al., “Single Shot Longitudinal Bunch Profile Measurements by Temporally Resolved Electro-Optical Detection”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEO2A02, pp. 221-223.
- L. M. Bobb, N. Chritin, T. Lefevre, M. G. Billing, and V. Karataev, “UV/X-ray Diffraction Radiation for Non-intercepting Micron-scale Beam Size Measurement”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCC01, pp. 24-28.
- K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
- L. Shi et al., “Dielectric Waveguide-Based THz Radiator Study for SwissFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 94-97.
- M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289.
- J. M. Weber, M. J. Chin, C. Steier, and E. C. Williams, “ALS FPGA-Based Digital Power Supply Controller for Ramped Power Supplies in the Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP009, pp. 1550-1552.
- T. H. Luo et al., “Progress on the MICE RF Module at LBNL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 454-456.
- E. C. Williams et al., “New EPICS Display Manager in WPF”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP101, pp. 877-879.
- M. Sapinski et al., “Ionization Profile Monitor Simulations - Status and Future Plans”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 520-523.
- J. Qiang, S. Paret, K. Ohmi, and T. Pieloni, “Strong-Strong Beam-Beam Simulation of Bunch Length Splitting at the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2210-2213.
- C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2650-2653.
- T. Hofmann et al., “Design of a Laser-based Profile Monitor for LINAC4 Commissioning at 50 MeV and 100 MeV”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 451-455.
- R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467.
- Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19.
- F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3486-3489.
- F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829.
- E. W. Nissen and T. Satogata, “Revised Optics Design for the JLEIC Ion Booster”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3537-3539.
- M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636.
- V. R. Arsov et al., “Commissioning and Results from the Bunch Arrival-time Monitor Downstream the Bunch Compressor at the SwissFEL Test Injector”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP085, pp. 933-936.
- T. Eriksson et al., “AD Status and Consolidation Plans”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper MOPM2HA02, pp. 36-39.
- D. Zhou, Y. H. Chin, K. Ohmi, and G. V. Stupakov, “Calculation of Coherent Wiggler Radiation using Eigenfunction Expansion Method”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR054, pp. 3048-3050.
- T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977.
- A. Seryi et al., “Accelerator Design Educational Primer – Conceptualizing and Optimizing the Hybrid LHeC-like Electron-Ion Collider Design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEV1301, this conference.
- G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64.
- B. Schlitt, M. Hoerr, A. Schnase, G. Schreiber, and W. Vinzenz, “RF System Development for the New 108 MHz Heavy Ion High-Energy Linac at GSI”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP058, pp. 556-558.
- P. Belochitskii, “ELENA Project Status”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196.
- A. Fiebig, R. Hohbach, P. Marchand, and J. O. Pearce, “Design Considerations, Construction and Performance of a Sled-Type Radiofrequency Pulse Compressor Using Very High 0 Cylindrical Cavities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1931-1934.
- T. H. Luo, A. J. DeMello, A. R. Lambert, D. Li, S. Prestemon, and S. P. Virostek, “Progress on the MICE 201 MHz Cavities at LBNL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3378-3380.
- L. Teofili et al., “Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3444-3447.
- J. R. Cary, “High-Performance Self-Consistent Electromagnetic Modeling of Beams”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOAPMP02, pp. 74-74.
- R. Hohbach, E. Jensen, A. K. Mitra, and R. L. Poirier, “Higher Order Mode Damping of the CERN PS 40 MHz Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP093L, pp. 2068-2070.
- S. S. Gilardoni et al., “The PS Upgrade Programme: Recent Advances”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA042, pp. 2594-2596.
- N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “The Mode Matching Method Applied to Beam Coupling Impedance Calculations of Finite Length Devices”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR062, pp. 3069-3071.
- S. R. Lawrie, A. P. Letchford, J. K. Pozimski, and P. Savage, “Simulations to Flatten the Field of the FETS RFQ”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC061, pp. 223-225.
- J. C. Herrera, C. Lasky, and M. Month, “AGS Low Field Correction Elements”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 425-431.
- R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41.
- K. Kubo, “Beam Development in ATF Damping Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP03D, pp. 469-471.
- L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2781-2783.
- G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2789-2793.
- A. Lal, K. Wharton, D. Gordon, M. J. Everett, C. E. Clayton, and C. Joshi, “Measurements of the Beatwave Dynamics in Time and Space”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB04, pp. 767-769.
- H. J. Qian et al., “Design of a 1.3 GHz Two-cell Buncher for APEX”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3924-3926.
- R. J. Ducar, “A CAMAC Serial Crate Controller for the Tevatron Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2303-2305.
- S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 407-409.
- D. Alves, “Estimation of Longitudinal Profiles of Ion Bunches in the LHC Using Schottky-Based Diagnostics”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 45-49.
- J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179.
- A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Horizontal Emittance Regulation at SIBERIA-2”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC13, pp. 347-349.
- M. H. Oruganti, B. Naranjo, J. B. Rosenzweig, and M. Yadav, “Comparing Methods of Recovering Gamma Energy Distributions from PEDRO Spectrometer Responses”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1784-1786.
- A. Neumann et al., “The BERLinPro SRF Photoinjector System - From First RF Commissioning to First Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1660-1663.
- R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2301-2303.
- G. Schiwietz, J. G. Hwang, M. Koopmans, and M. Ries, “Overview of Bunch-Resolved Diagnostics for the Future BESSY VSR Electron-Storage Ring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 50-54.
- J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374.
Back to search