JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975. 
[n]	H. Kabumoto, N. Ishizaki, M. Matsuda, Y. Otokawa, and S. Takeuchi, “Superconducting Twin Quarter Wave Resonator for Acceleration of Low Velocity Heavy Ions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO093, pp. 849-853. 
[n]	A. Faugier et al., “High Intensity Proton Beams in a Multi-cycled SPS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP12, pp. 464-466. 
[n]	J. Komatsu et al., “Dependence of the Wall-Current Monitor on the Beam Position”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-62, pp. 848-850. 
[n]	E. Vogel et al., “Accelerator Module Repair for the European XFEL Installation”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 82-86. doi:10.18429/JACoW-SRF2017-MOPB015
[n]	J. Manczak et al., “Refined FLUKA simulation model of neutrino-induced effective dose from a multi-TeV muon collider”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM076, unpublished. 
[n]	D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60. 
[n]	S. Myers, “LHC Commissioning and First Operation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXBMH01, pp. 6-10. 
[n]	B. Brajuskovic, P. Den Hartog, and E. Trakhtenberg, “Mechanical Analysis of the Prototype Undulator for the Linac Coherent Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG001, pp. 1017-1019. 
[n]	D. Bolkhovityanov, P. B. Cheblakov, and F. A. Emanov, “CXv4, a Modular Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 915-918. doi:10.18429/JACoW-ICALEPCS2015-WEPGF093
[n]	S. H. Kim, T. G. Berenc, J. Carwardine, G. Decker, M. P. Kelly, and P. N. Ostroumov, “Design Study of the Higher Harmonic Cavity for Advanced Photon Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1819-1821. doi:10.18429/JACoW-IPAC2015-TUPJE076
[n]	J. Galambos, “High Power Proton Beam Targets: Technological Evolution, Current Challenges, and the Future”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1075-1079. doi:10.18429/JACoW-IPAC2016-TUZB01
[n]	K. R. Crandall, “Transverse Beam Matching Using Wire Scanners”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C01, pp. 51-53. 
[n]	Y. Zhang, H. Jia, X. C. Kang, M. Li, J. X. Wu, and G. Zhu, “Design and Test Status of Beam Position Monitors for ADS Injector II Proton LINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME045, pp. 574-576. 
[n]	D. B. Shwartz et al., “VEPP-2000 Collider Operation in Full Energy Range with New Injector”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 7-11. doi:10.18429/JACoW-RUPAC2018-MOXMH02
[n]	S. M. Gurov et al., “Large Aperture Quadrupole Magnets for ISIS TS-1 and TS-2”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP146, pp. 1103-1105. 
[n]	J. V. Lebacqz, “Status Report on Klystron Improvements”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1324-1328. 
[n]	N. Lipkowitz et al., “Longitudinal Beam Tuning at FACET”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC052, pp. 1287-1289. 
[n]	S. V. Shiyankov et al., “PROJECT OF DEUTERON ACCELERATOR BASED CARBON TARGET FOR NEUTRON PRODUCTION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP037, pp. XX-XX. 
[n]	J. Peters, “A Phase Measurement System for RF Pulses”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-04, pp. 535-537. 
[n]	R. Demitra, A. Biagioni, L. Crincoli, M. Ferrario, and R. Pompili, “3D characterization of plasma density in capillary discharges for plasma-based accelerators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS113, unpublished. 
[n]	Y. Jongen, M. Lacroix, G. Ryckewaert, and S. Zaremba, “Beam Dynamics Aspects of a High Intensity Isotope Production Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-11, pp. 260-262. 
[n]	N. Malitsky and R. M. Talman, “Accelerator Description Formats”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS01, pp. 297-302. 
[n]	S. N. Andrianov, A. N. Ivanov, and E. A. Podzyvalov, “A LEGO Paradigm for Virtual Accelerator Concept”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN007, pp. 728-730. 
[n]	R. M. Talman and J. Talman, “Beam and Spin Dynamics in an Electric Proton EDM Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THXB03, pp. 3203-3207. 
[n]	R. Bailey et al., “Dynamic Effects and their Control at the LHC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B005, pp. 66-68. 
[n]	K. C. Liao, O. Brunner, E. Ciapala, T. Junginger, and W. Weingarten, “Second Sound Measurement Using SMD Resistors to Simulate Quench Locations on the 704 MHz Single-cell Cavity at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC030, pp. 2269-2271. 
[n]	H. P. Bluem, A. M. M. Todd, and G. R. Neil, “Superconducting RF Injector for High-Power Free-Electron Lasers (FEL)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPB011, pp. 92-94. 
[n]	E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2160-2162. doi:10.18429/JACoW-IPAC2019-TUPTS103
[n]	J. H. Park, M. Babzien, K. Kusche, and V. Yakimenko, “Experimental Approaches of Emittance Dilution Induced by Misalignments in a Photoinjector”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH008, pp. 247-250. 
[n]	A. Esper et al., “Superconducting multipole triplet field measurements”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4051-4054. doi:10.18429/JACoW-IPAC2023-THPA043

For LaTeX

Use Complete Form

For BibTeX

References

Back to search