Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
[n] A. A. Fateev et al., “Status of the First Stage of Linear Induction Accelerator SILUND-21”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA20, pp. 1272-1273.
[n] J. B. Li et al., “Influences of Magnetic Field Parameters to ECRIS Plasma Characteristics”, presented at the ECRIS'20, East Lansing, MI, USA, Sep. 2020, paper TUWZO04, unpublished.
[n] A. Tran, Y. Hao, and B. Mustapha, “Selecting 1D projections for 2D tomography reconstruction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2781-2784. doi:10.18429/JACoW-IPAC2025-THPM044
[n] M. Fujimoto et al., “STUDY ON STABILITY OF THE L-BAND LINAC AT ISIR, OSAKA UNIVERSITY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP022, pp. XX-XX.
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 358-362. doi:10.18429/JACoW-IBIC2019-TUPP024
[n] G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished.
[n] R. J. Adler, G. F. Kiuttu, and B. Sabol, “Alternate Transport Techniques for Electron Induction Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3198-3201.
[n] Q. R. Marksteiner et al., “Using Off-Axis Undulator Radiation as a Longitudinal Electron-Beam Diagnostic”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZD4, unpublished.
[n] M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2889-2891. doi:10.18429/JACoW-IPAC2023-WEPA104
[n] P. Heil et al., “High Energy Density Irradiation With MAMI LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1296-1299. doi:10.18429/JACoW-IPAC2017-TUPAB003
[n] J. Sura, L. Calabretta, G. Di Biasi, P. Gmaj, and D. Rifuggiato, “Material Consideration for Magnetic Channels”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XC-06, pp. 589-591.
[n] P. Davis, M. Kelly, and G. Zinkann, “Testing of high-capacity Sumitomo cryocooler”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP10, unpublished.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] Y. H. Xie, C. D. Hu, C. C. Jiang, L. Z. Liang, S. Liu, and Y. L. Xie, “Analysis of Beam Quality Optimization of Bucket Ion Source”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP047, pp. 147-149.
[n] O. Brovko et al., “DIAGNOSTICS OF ULTRASHORT ELECTRON BUNCHES DEVELOPED AT JINR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEEAU04, pp. XX-XX.
[n] R. Lacuata et al., “Adaptations to COVID-19: How Working Remotely Has Made Teams Work Efficiently Together”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 550-552. doi:10.18429/JACoW-ICALEPCS2021-WEAR02
[n] S. Masuda et al., “Development of a Linac for Injection of Ultrashort Electron Bunches Into Laser Plasma Electron Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2725-2727. doi:10.18429/JACoW-IPAC2021-WEPAB055
[n] J. Wieland et al., “Improved measurements of nonlinear integrable optics at IOTA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3230-3232. doi:10.18429/JACoW-IPAC2023-WEPL052
[n] S. Ramberger et al., “CERN Linac4 Drift Tube Linac Manufacturing and Assembly”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP036, pp. 923-925.
[n] F. Bosco et al., “Beam Breakup Studies for the C3 Linear Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL191, unpublished.
[n] J. B. Li, “An experimental study of afterglow mode on SECRAL-II ion source”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper THT5AUCO16, unpublished.
[n] R. Kuroda et al., “Simulation Study of Compact Hard X-ray Source via Laser Compton Scattering”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH178, pp. 2346-2348.
[n] A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 257-260. doi:10.18429/JACoW-FLS2023-TH4A2
[n] R. E. Fuja and W. F. Praeg, “Performance of Transductors for Precision High-Current Measurement and Control”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 411-414.
[n] X. Ding, “The phase averaging scheme for phase reference line of CiADS SC Linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA103, unpublished.
[n] A. D. Brynes et al., “Transverse Optics-based Control of the Microbunching Instability”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 107-111. doi:10.18429/JACoW-FLS2023-TU4P16
[n] S. Sampayan, J. Weir, and R. Richardson, “Elliptical X-Ray Spot Measurement”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC07, pp. 161-163.
[n] M. G. Mazarakis, R. J. Adler, R. B. Miller, S. L. Shope, and D. L. Smith, “Intense Electron Beam Autogenerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3171-3174.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Korenev, “Critical Analysis of Negative Hydrogen Ion Sources for Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT018, pp. 192-194.
- A. A. Fateev et al., “Status of the First Stage of Linear Induction Accelerator SILUND-21”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA20, pp. 1272-1273.
- J. B. Li et al., “Influences of Magnetic Field Parameters to ECRIS Plasma Characteristics”, presented at the 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUWZO04, unpublished.
- A. Tran, Y. Hao, and B. Mustapha, “Selecting 1D projections for 2D tomography reconstruction”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM044, pp. 2781-2784.
- M. Fujimoto et al., “STUDY ON STABILITY OF THE L-BAND LINAC AT ISIR, OSAKA UNIVERSITY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP022, pp. XX-XX.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 358-362.
- G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished.
- R. J. Adler, G. F. Kiuttu, and B. Sabol, “Alternate Transport Techniques for Electron Induction Linacs”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3198-3201.
- Q. R. Marksteiner et al., “Using Off-Axis Undulator Radiation as a Longitudinal Electron-Beam Diagnostic”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEZD4, unpublished.
- M. Kilpatrick, J. Edelen, J. Einstein-Curtis, R. O'Rourke, K. Drees, and M. Valette, “Prediction of superconducting magnet quenches with machine learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA104, pp. 2889-2891.
- P. Heil et al., “High Energy Density Irradiation With MAMI LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1296-1299.
- J. Sura, L. Calabretta, G. Di Biasi, P. Gmaj, and D. Rifuggiato, “Material Consideration for Magnetic Channels”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XC-06, pp. 589-591.
- P. Davis, M. Kelly, and G. Zinkann, “Testing of high-capacity Sumitomo cryocooler”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP10, unpublished.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- Y. H. Xie, C. D. Hu, C. C. Jiang, L. Z. Liang, S. Liu, and Y. L. Xie, “Analysis of Beam Quality Optimization of Bucket Ion Source”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP047, pp. 147-149.
- O. Brovko et al., “DIAGNOSTICS OF ULTRASHORT ELECTRON BUNCHES DEVELOPED AT JINR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEEAU04, pp. XX-XX.
- R. Lacuata et al., “Adaptations to COVID-19: How Working Remotely Has Made Teams Work Efficiently Together”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 550-552.
- S. Masuda et al., “Development of a Linac for Injection of Ultrashort Electron Bunches Into Laser Plasma Electron Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2725-2727.
- J. Wieland et al., “Improved measurements of nonlinear integrable optics at IOTA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL052, pp. 3230-3232.
- S. Ramberger et al., “CERN Linac4 Drift Tube Linac Manufacturing and Assembly”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP036, pp. 923-925.
- F. Bosco et al., “Beam Breakup Studies for the C3 Linear Collider”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL191, unpublished.
- J. B. Li, “An experimental study of afterglow mode on SECRAL-II ion source”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper THT5AUCO16, unpublished.
- R. Kuroda et al., “Simulation Study of Compact Hard X-ray Source via Laser Compton Scattering”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH178, pp. 2346-2348.
- A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-band Technology and Cavity-enhanced High Average Power Ultrafast Lasers”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A2, pp. 257-260.
- R. E. Fuja and W. F. Praeg, “Performance of Transductors for Precision High-Current Measurement and Control”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 411-414.
- X. Ding, “The phase averaging scheme for phase reference line of CiADS SC Linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA103, unpublished.
- A. D. Brynes et al., “Transverse Optics-based Control of the Microbunching Instability”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TU4P16, pp. 107-111.
- S. Sampayan, J. Weir, and R. Richardson, “Elliptical X-Ray Spot Measurement”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOC07, pp. 161-163.
- M. G. Mazarakis, R. J. Adler, R. B. Miller, S. L. Shope, and D. L. Smith, “Intense Electron Beam Autogenerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3171-3174.
Back to search