Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3257-3260.
[n] G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3908-3910. doi:10.18429/JACoW-IPAC2015-THPF091
[n] M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
[n] F. J. Kriegler, “Dynamic Effects of Higher RF Harmonics”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART2-8, pp. 204-213.
[n] I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
[n] C. E. Hill, “Operational Experience with the CERN Hadron Linacs”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP16, pp. 360-362.
[n] J. P. Edelen, E. G. Carlin, M. V. Keilman, P. Moeller, and R. Nagler, “A cloud based toolbox for accelerator controls interfaces and optimization”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV017, unpublished.
[n] H. C. Hoyt, “Numerical Studies of the Shapes of Drift Tubes and Linac Cavities”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 153-156.
[n] C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472.
[n] A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
[n] D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
[n] B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2355-2358.
[n] I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
[n] A. Piwinski, “Computer Simulation of the Beam-Beam Interaction at a Crossing Angle”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2240-2243.
[n] I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
[n] W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 64-66. doi:10.18429/JACoW-SRF2017-MOPB009
[n] N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
[n] W. F. Bergan, P. Baxevanis, M. Blaskiewicz, G. Stupakov, and E. Wang, “Design of an MBEC Cooler for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1819-1822. doi:10.18429/JACoW-IPAC2021-TUPAB179
[n] J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4780-4783. doi:10.18429/JACoW-IPAC2018-THPML062
[n] J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX.
[n] J. Forrestal et al., “Access Control and Interlock System at the Advanced Photon Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P055, pp. 3669-3671.
[n] E. J. Bleser et al., “Operation of the NAL Main Ring Extraction System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 502-505.
[n] V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517.
[n] S. X. Peng et al., “Design of a 2.45 GHz Surface Wave Plasma Source for Plasma Flood Gun”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 143-145. doi:10.18429/JACoW-ECRIS2020-WEYZO02
[n] E. G. Auld, S. Oraas, A. J. Otter, G. H. Mackenzie, J. R. Richardson, and J. J. Burgerjon, “Design of the 4000 ton Magnet for the TRIUMF Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A13, pp. XX-XX.
[n] B. G. Chidley, R. M. Hutcheon, and G. E. McMichael, “A Heavy Ion RFQ with High Accelerating Gradient”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-43, pp. 361-363.
[n] W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 688-690. doi:10.18429/JACoW-LINAC2018-THPO006
[n] H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 54-56. doi:10.18429/JACoW-MEDSI2016-MOPE23
[n] A. M. Kozodaev et al., “Program of Activities for the Linac-Driver of ITEP Subcritical Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P117, pp. 3848-3850.
[n] J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
[n] T. Chen, W. Li, and Y. J. Pei, “Design of the Condenser System and Imaging System for a UEM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3485-3487. doi:10.18429/JACoW-IPAC2019-THPMP016
[n] C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190.
[n] T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
[n] G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787.
[n] A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31.
[n] B. J. Holzer, K. D. J. Andr?®, S. A. Bogacz, O. S. Br??ning, and M. Klein, “Accelerator Challenges of the LHeC Project”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2570-2573. doi:10.18429/JACoW-IPAC2021-WEPAB001
[n] D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630.
[n] G. Olry, “Recent Progress of ESS Spoke and Elliptical Cryomodules”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUAA06, pp. 474-480.
[n] G. Kourkafas, T. Kamps, A. Neumann, and B. Keune, “Transverse Deflecting Cavity for Longitudinal Beam Diagnostics at BERLinPro”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 875-878. doi:10.18429/JACoW-LINAC2018-THPO083
[n] R. E. Olsen, “A High Performance Digital Triggering System for Phase Controlled Rectifiers”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2867-2870.
[n] A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
[n] F. Chautard et al., “GANIL Status Report”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272.
[n] G. Jackson, “Analysis of the Tevatron Collider Beam Spectrum for Bunched Beam Stochastic Cooling”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP20, pp. 2931-2933.
[n] K. B. Mallory, “Control Through a System of Small Computers”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1086-1088.
[n] Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250.
[n] F. Antoniotti et al., “Developments on the SCADA of CERN Accelerators Vacuum”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC030, pp. 135-138.
[n] C. E. Hill, “Operation of a Short Pulse Negative Ion Source”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-42, pp. 358-360.
[n] D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440.
[n] W. Cheng, A. Brill, and X. Sun, “Status of the transverse bunch-by-bunch feedback system at APS-U storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3311-3313. doi:10.18429/JACoW-IPAC2024-THPG28
[n] M. Plesko, “An Interactive Graphical Model for the Design and Control of a Transfer Line”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 735-738.
[n] V. L. Smirnov and S. B. Vorozhtsov, “A Coupled Cyclotron Solution for Carbon Ions Acceleration”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 270-273. doi:10.18429/JACoW-Cyclotrons2016-WEB04
[n] S. A. Medley, I. D. Finch, S. M. Malinowski, and M. Romanovschi, “Developing an Alarm Philosophy for the EPICS Control System at ISIS”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper THPV016, unpublished.
[n] A. Gotz et al., “Building a Data Analysis as a Service Portal”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1229. doi:10.18429/JACoW-ICALEPCS2019-WEPHA057
[n] H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423.
[n] T. Antaya, P. Miller, and D. Poe, “K-500 Superconducting Cyclotron Deflector High Voltage Tests”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2982-2985.
[n] J. Wei et al., “FRIB Accelerator Status and Challenges”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TU1A04, pp. 417-421.
[n] A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1963-1966.
[n] R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2579-2582.
[n] M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-10, pp. 59-61.
[n] M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
[n] D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP089, pp. 357-360.
[n] M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
[n] W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3355-3357. doi:10.18429/JACoW-IPAC2015-WEPTY036
[n] J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1108-1110. doi:10.18429/JACoW-IPAC2014-TUPRO039
[n] P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9.
[n] M. Sachwitz, A. Hofmann, S. Pauliuk, K. I. Tiedtke, and H. Wabnitz, “Ionisation Profile Monitor to Determine Spatial and Angular Stability of FEL Radiation of FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC090, pp. 1266-1268.
[n] P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530.
[n] A. F. Press, M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Experimental Verification of DARHT Axis 1 Injector PIC Simulations”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2183-2185. doi:10.18429/JACoW-IPAC2022-WEPOTK054
[n] W. Bialowons et al., “Computer Simulations of the Wake Field Transformer Experiment at DESY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 902-905.
[n] R. Bassini, C. Birattari, M. Bonardi, M. Castiglioni, and M. Silari, “An Absolute Method for the Energy Calibration of Cyclotron Beams”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-05, pp. 291-294.
[n] A.Drago, “TRENDS IN FAST FEEDBACK R&D”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH12, pp. XX-XX.
[n] J. Y. Li, C. Diao, W. Li, G. Liu, Z. P. Liu, and B. G. Sun, “Closed Orbit Correction of HLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH011, pp. 1255-1257.
[n] F. Galluccio and F. Schmidt, “Slow Particle Loss in Hadron Colliders”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 640-643.
[n] W. Praeg and D. McGhee, “Power Supplies for the Ring Magnets of the Synchrotron X-Ray Source at ANL”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1526-1529.
[n] B. N. Gikal, G. G. Gulbekian, and V. B. Kutner, “Recent Developments at Dubna U400 and U400M Cyclotrons”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-01, pp. 587-591.
[n] T. Kikuchi, K. Horioka, T. Katayama, and S. Kawata, “Application of Selected Momentum Correction Method Using Induction Voltage Modulator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT043, pp. 2762-2764.
[n] R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
[n] A. Bungau, R. J. Barlow, J. R. Alonso, J. M. Conrad, J. Spitz, and M. Shaevitz, “Optimisation Studies of a High Intensity Electron Antineutrino Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI073, pp. 449-451.
[n] E. Bravin, B. Dehning, and G. Mugnai, “Energy Calibration at LEP using Nuclear Magnetic Resonance Probes”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05H, pp. 388-390.
[n] P. Dolegieviez, R. Ferdinand, X. Ledoux, H. Savajols, and F. Varenne, “Status of the SPIRAL2 Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 844-847. doi:10.18429/JACoW-IPAC2019-MOPTS005
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
[n] A.Blinov; A.Bogomyagkov; A.Bondar; V.Kiselev; I.Koop; G.Kurkin; E.Levichev; P.Logachev; S.Nikitin; I.Okunev; V.M.Petrov; P.Piminov; Yu.Pupkov; D.Shatilov; S.Sinyatkin; V.Smaluk; A.Skrinsky; P.Vobly, “THE PROJECT OF T-CHARM FACTORY WITH CRAB WAIST”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH09, pp. XX-XX.
[n] R. Olsen, “PEP-II 16-Channel Corrector Controller Using BITBUS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P015, pp. 3485-3487.
[n] D. L. Brown, M. T. Crofford, and C. C. Peters, “Optimizing Room Temperature RF Structures for Accelerator Driven System Operations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2993-2995. doi:10.18429/JACoW-IPAC2019-WEPRB075
[n] J. D. Jarvis, “Experimental Demonstration of Optical Stochastic Cooling: Single-Particle Feedback in the Optical Regime”, presented at the IBIC'22, Kraków, Poland, Sep. 2022, paper TH2I3, unpublished.
[n] R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
[n] S. Ikeda, T. Kanesue, and M. Okamura, “Design of IH-DTL to Accelerate Intense Lithium-Ion Beam for Compact Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 194-196. doi:10.18429/JACoW-LINAC2022-MOPOGE18
[n] S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
[n] V. Variale et al., “Implementations on the RF Charge Breeder Device BRIC with Test Measurements”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS092, pp. 1717-1719.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Theilacker et al., “Fermilab Energy Saver Refrigeration System Tests”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3257-3260.
- G. Iadarola et al., “Detailed Studies of Beam Induced Scrubbing in the CERN-SPS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3908-3910.
- M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
- F. J. Kriegler, “Dynamic Effects of Higher RF Harmonics”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART2-8, pp. 204-213.
- I. Konkashbaev, P. F. Fisher, A. Hassanein, and N. V. Mokhov, “Enhancement of Heat Removal using Concave Liquid Metal Targets for High-Power Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN089, pp. 2915-2917.
- C. E. Hill, “Operational Experience with the CERN Hadron Linacs”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP16, pp. 360-362.
- J. P. Edelen, E. G. Carlin, M. V. Keilman, P. Moeller, and R. Nagler, “A cloud based toolbox for accelerator controls interfaces and optimization”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper THPV017, unpublished.
- H. C. Hoyt, “Numerical Studies of the Shapes of Drift Tubes and Linac Cavities”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 153-156.
- C. Dimopoulou et al., “Experimental Demonstration of Longitudinal Ion Beam Accumulation with Electron Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP048, pp. 3470-3472.
- A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX.
- D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX.
- B. E. Chase and R. J. Pasquinelli, “VXI Based Low Level RF System for Fermilab Linac Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2355-2358.
- I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- S. D. Nelson, R. J. Briggs, G. J. Caporaso, A. Friedman, B. R. Poole, and W. Waldron, “Electromagnetic Simulations of Helical-Based Ion Acceleration Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT037, pp. 2485-2487.
- A. Piwinski, “Computer Simulation of the Beam-Beam Interaction at a Crossing Angle”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2240-2243.
- I. Miura, E. Minehara, Y. Mashima, S. Yoshizawa, R. Nagai, and M. Takeuchi, “Measurements of the Microwave Surface Resistance of Bi2Sr2CaCu2Ox Superconductor on Silver Substrate Using a Half-wave Coaxial Cavity Resonator”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91G01, pp. XX-XX.
- W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 64-66.
- N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
- W. F. Bergan, P. Baxevanis, M. Blaskiewicz, G. Stupakov, and E. Wang, “Design of an MBEC Cooler for the EIC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1819-1822.
- J. Chen, L. W. Lai, Y. B. Leng, T. Wu, and R. X. Yuan, “A Beam Based Method to Optimize the SBPM System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4780-4783.
- J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX.
- J. Forrestal et al., “Access Control and Interlock System at the Advanced Photon Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P055, pp. 3669-3671.
- E. J. Bleser et al., “Operation of the NAL Main Ring Extraction System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 502-505.
- V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517.
- S. X. Peng et al., “Design of a 2.45 GHz Surface Wave Plasma Source for Plasma Flood Gun”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEYZO02, pp. 143-145.
- E. G. Auld, S. Oraas, A. J. Otter, G. H. Mackenzie, J. R. Richardson, and J. J. Burgerjon, “Design of the 4000 ton Magnet for the TRIUMF Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A13, pp. XX-XX.
- B. G. Chidley, R. M. Hutcheon, and G. E. McMichael, “A Heavy Ion RFQ with High Accelerating Gradient”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-43, pp. 361-363.
- W. Xu et al., “Status of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 688-690.
- H. C. Ho et al., “An Assembling Calibration Method of XBPM Diamond Blades in TPS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 54-56.
- A. M. Kozodaev et al., “Program of Activities for the Linac-Driver of ITEP Subcritical Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P117, pp. 3848-3850.
- J. Cai, E. S. McCrory, D. J. Nicklaus, and T. B. Bolshakov, “SDA Time Intervals”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOPA02, pp. 79-81.
- T. Chen, W. Li, and Y. J. Pei, “Design of the Condenser System and Imaging System for a UEM”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3485-3487.
- C. Benedetti, G. Franchetti, I. Hofmann, and G. Turchetti, “Transverse Mismatch Oscillations of a Bunched Beam in Presence of Space Charge and External Nonlinearities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC086, pp. 3188-3190.
- T. Spickermann et al., “Comparison of Carbon Stripper Foils Under Operational Conditions at the Los Alamos Proton Storage Ring”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC02, pp. 262-264.
- G. Feng, W. Fan, W. W. Gao, W. Li, L. Wang, and S. C. Zhang, “Conceptual Design of Injection System for Hefei Light Source (HLS) Upgrade Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC030, pp. 1785-1787.
- A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31.
- B. J. Holzer, K. D. J. Andr?®, S. A. Bogacz, O. S. Br??ning, and M. Klein, “Accelerator Challenges of the LHeC Project”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2570-2573.
- D. Tong, L. Xiao, and Y. Ni, “Non-Intrusive Diagnosis of Individual Cell Frequencies in a Cavity Chain”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E206, pp. 626-630.
- G. Olry, “Recent Progress of ESS Spoke and Elliptical Cryomodules”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUAA06, pp. 474-480.
- G. Kourkafas, T. Kamps, A. Neumann, and B. Keune, “Transverse Deflecting Cavity for Longitudinal Beam Diagnostics at BERLinPro”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 875-878.
- R. E. Olsen, “A High Performance Digital Triggering System for Phase Controlled Rectifiers”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2867-2870.
- A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435.
- F. Chautard et al., “GANIL Status Report”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272.
- G. Jackson, “Analysis of the Tevatron Collider Beam Spectrum for Bunched Beam Stochastic Cooling”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP20, pp. 2931-2933.
- K. B. Mallory, “Control Through a System of Small Computers”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1086-1088.
- Y. Sun et al., “BEPCII Superconducting RF System Operation Status”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO062, pp. 247-250.
- F. Antoniotti et al., “Developments on the SCADA of CERN Accelerators Vacuum”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC030, pp. 135-138.
- C. E. Hill, “Operation of a Short Pulse Negative Ion Source”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-42, pp. 358-360.
- D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1437-1440.
- W. Cheng, A. Brill, and X. Sun, “Status of the transverse bunch-by-bunch feedback system at APS-U storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG28, pp. 3311-3313.
- M. Plesko, “An Interactive Graphical Model for the Design and Control of a Transfer Line”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 735-738.
- V. L. Smirnov and S. B. Vorozhtsov, “A Coupled Cyclotron Solution for Carbon Ions Acceleration”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 270-273.
- S. A. Medley, I. D. Finch, S. M. Malinowski, and M. Romanovschi, “Developing an Alarm Philosophy for the EPICS Control System at ISIS”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper THPV016, unpublished.
- A. Gotz et al., “Building a Data Analysis as a Service Portal”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1229.
- H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423.
- T. Antaya, P. Miller, and D. Poe, “K-500 Superconducting Cyclotron Deflector High Voltage Tests”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2982-2985.
- J. Wei et al., “FRIB Accelerator Status and Challenges”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TU1A04, pp. 417-421.
- A. Schnase, F. J. Etzkorn, and H. Meuth, “An RF-Synthesizer for Fundamental and Precisely Adjusted Higher Harmonics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1963-1966.
- R. Keller, P. Allison, and J. D. Sherman, “Use of a Minimum-Elipse Criterion in the Study of Ion-Beam Extraction Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2579-2582.
- M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-10, pp. 59-61.
- M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
- D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP089, pp. 357-360.
- M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
- W. Schappert, J. P. Holzbauer, and Y. M. Pischalnikov, “Progress at FNAL in the Field of the Active Resonance Control for Narrow Bandwidth SRF Cavities.”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3355-3357.
- J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1108-1110.
- P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9.
- M. Sachwitz, A. Hofmann, S. Pauliuk, K. I. Tiedtke, and H. Wabnitz, “Ionisation Profile Monitor to Determine Spatial and Angular Stability of FEL Radiation of FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC090, pp. 1266-1268.
- P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530.
- A. F. Press, M. A. Jaworski, D. C. Moir, and S. Szustkowski, “Experimental Verification of DARHT Axis 1 Injector PIC Simulations”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2183-2185.
- W. Bialowons et al., “Computer Simulations of the Wake Field Transformer Experiment at DESY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 902-905.
- R. Bassini, C. Birattari, M. Bonardi, M. Castiglioni, and M. Silari, “An Absolute Method for the Energy Calibration of Cyclotron Beams”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-05, pp. 291-294.
- A.Drago, “TRENDS IN FAST FEEDBACK R&D”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH12, pp. XX-XX.
- J. Y. Li, C. Diao, W. Li, G. Liu, Z. P. Liu, and B. G. Sun, “Closed Orbit Correction of HLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH011, pp. 1255-1257.
- F. Galluccio and F. Schmidt, “Slow Particle Loss in Hadron Colliders”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 640-643.
- W. Praeg and D. McGhee, “Power Supplies for the Ring Magnets of the Synchrotron X-Ray Source at ANL”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1526-1529.
- B. N. Gikal, G. G. Gulbekian, and V. B. Kutner, “Recent Developments at Dubna U400 and U400M Cyclotrons”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-01, pp. 587-591.
- T. Kikuchi, K. Horioka, T. Katayama, and S. Kawata, “Application of Selected Momentum Correction Method Using Induction Voltage Modulator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT043, pp. 2762-2764.
- R. Kammering and Ch. Schmidt, “Feedbacks and Automation at the Free Electron Laser in Hamburg (FLASH)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC121, pp. 1345-1347.
- A. Bungau, R. J. Barlow, J. R. Alonso, J. M. Conrad, J. Spitz, and M. Shaevitz, “Optimisation Studies of a High Intensity Electron Antineutrino Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI073, pp. 449-451.
- E. Bravin, B. Dehning, and G. Mugnai, “Energy Calibration at LEP using Nuclear Magnetic Resonance Probes”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05H, pp. 388-390.
- P. Dolegieviez, R. Ferdinand, X. Ledoux, H. Savajols, and F. Varenne, “Status of the SPIRAL2 Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 844-847.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
- A.Blinov; A.Bogomyagkov; A.Bondar; V.Kiselev; I.Koop; G.Kurkin; E.Levichev; P.Logachev; S.Nikitin; I.Okunev; V.M.Petrov; P.Piminov; Yu.Pupkov; D.Shatilov; S.Sinyatkin; V.Smaluk; A.Skrinsky; P.Vobly, “THE PROJECT OF T-CHARM FACTORY WITH CRAB WAIST”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper WEACH09, pp. XX-XX.
- R. Olsen, “PEP-II 16-Channel Corrector Controller Using BITBUS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P015, pp. 3485-3487.
- D. L. Brown, M. T. Crofford, and C. C. Peters, “Optimizing Room Temperature RF Structures for Accelerator Driven System Operations”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2993-2995.
- J. D. Jarvis, “Experimental Demonstration of Optical Stochastic Cooling: Single-Particle Feedback in the Optical Regime”, presented at the 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, paper TH2I3, unpublished.
- R. Thurman-Keup, R. P. Fliller, and G. M. Kazakevich, “Bunch Length Measurement at the Fermilab A0 Photoinjector using a Martin Puplett Interferometer”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF025, pp. 153-157.
- S. Ikeda, T. Kanesue, and M. Okamura, “Design of IH-DTL to Accelerate Intense Lithium-Ion Beam for Compact Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 194-196.
- S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
- V. Variale et al., “Implementations on the RF Charge Breeder Device BRIC with Test Measurements”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS092, pp. 1717-1719.
Back to search