Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Wittmer, D. Schulte, and F. Zimmermann, “Calculating LHC Tuning Knobs using Various Methods”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT013, pp. 1159-1161.
[n] G. V. Trubnikov, I. N. Meshkov, G. Shirkov, Ju. Boudagov, Yu. N. Denisov, and A. N. Sissakian, “ILC Siting in Moscow Region Near Dubna and ILC Related Activity at JINR”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TU202, pp. 360-363.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
[n] J. Manczak et al., “Radiation load studies for the proton target area of a multi-TeV muon collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2544-2547. doi:10.18429/JACoW-IPAC2024-WEPR28
[n] J-J. Gras, D. Belohrad, M. Ludwig, P. Odier, and C. Barschel, “Optimisation of the LHC Beam Current Transformers for Accurate Luminosity Determination”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC155, pp. 1395-1397.
[n] F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
[n] T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3841-3844. doi:10.18429/JACoW-IPAC2018-THPAL082
[n] I. P. Parajuli, G. Ciovati, W. A. Clemens, J. R. Delayen, A. V. Gurevich, and J. Nice, “Design and Commissioning of a Magnetic Field Scanning System for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 547-549. doi:10.18429/JACoW-SRF2019-TUP052
[n] S. Chel, M. Desmons, A. Hamdi, and F. Peauger, “New 1MW 704MHz RF Test Stand at CEA-Saclay”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD022, pp. 490-492.
[n] Z.-D. Tsai et al., “The Strategy between High Precision Temperature Control and Energy Saving for Air-Conditioning System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD041, pp. 2603-2605.
[n] M. Di Cosmo, Q. King, R. Murillo-Garcia, D. Nisbet, and B. Todd, “Dependable Implementation of the Beam Interlock Mechanism in CERN Power Converter Controllers”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1975-1978. doi:10.18429/JACoW-IPAC2018-WEPAF064
[n] Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
[n] C. Yao and H. Shang, “Chromaticity Measurement of the APS Booster”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG045, pp. 225-227.
[n] M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2872-2877. doi:10.18429/JACoW-IPAC2018-THXGBD1
[n] T. Mertens, T. Atkinson, F. Gl?Âckner, A. Jankowiak, M. Ries, and A. V. Tsakanian, “Impact of RF Coupler Kicks on Beam Dynamics in BESSY VSR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3182-3184. doi:10.18429/JACoW-IPAC2018-THPAF084
[n] R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
[n] S. G. Yaramyshev et al., “Advanced Beam Matching to a High Current RFQ”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP059, pp. 559-562.
[n] C. Steier et al., “Studies of the Nonlinear Dynamics Effects of APPLE-II Type EPUs at the ALS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH102, pp. 2152-2154.
[n] G. Torrisi et al., “3D Radio Frequency Simulation of the INFN-LNS Superconducting Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 361-364. doi:10.18429/JACoW-CYCLOTRONS2019-FRB03
[n] Z. Sun et al., “Fast Sn-Ion Transport on Nb Surface for Generating NbxSn Thin Films and XPS Depth Profiling”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 727-730. doi:10.18429/JACoW-NAPAC2019-WEPLM60
[n] M. Rossetti Conti and A. Bacci, “Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3247-3250. doi:10.18429/JACoW-IPAC2016-THPMB011
[n] C. Y. Liao, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. H. Huang, and C. Y. Wu, “Beam Trip Diagnostics for the TPS”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 458-460. doi:10.18429/JACoW-IBIC2017-WEPWC07
[n] H. Suk et al., “Underdense Plasma Lens Experiment at the UCLA Neptune Laboratory”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA139, pp. 3708-3710.
[n] L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
[n] S. Mikhailov et al., “Status of the Booster Injector for the Duke FEL Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE061, pp. 3544-3546.
[n] H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
[n] X. Pang, “Advances in Proton Linac Online Modeling”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2423-2427. doi:10.18429/JACoW-IPAC2015-WEXC2
[n] F. Furuta et al., “Development of superconducting RF cavity in traveling-wave regime at Fermilab”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS24, unpublished.
[n] L. S. Nadolski, “Methods and Tools to Simulate and Analyse Non-linear Dynamics in Electron Storage Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUXB01, pp. 937-941.
[n] H. Asano et al., “Operating Experience of the J-PARC Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP004, pp. 55-57.
[n] T. Y. Chung et al., “Reduction of Dynamic Multipole Content in Insertion Devices Using Flat Wires”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4313-4316. doi:10.18429/JACoW-IPAC2018-THPMK012
[n] L. R. Williams et al., “Design of the High Beta Cryomodule for the HIE-ISOLDE Upgrade at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC105, pp. 319-321.
[n] M. Y. Huang, L. Huang, N. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the transverse painting during the injection process for CSNS/RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2025-2027. doi:10.18429/JACoW-IPAC2015-TUPTY015
[n] E. B. Levichev, “A Project of Super Charm-Tau Factory in Novosibirsk”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, paper MOYBA03, pp. XX-XX.
[n] J. Faure, “The New SATURNE Injector Status Report on the 750 keV Preinjector”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-2, pp. 240-250.
[n] A. P. Denisov et al., “Design of a Compact Electron Gun for the High-Voltage Electron Cooling System of the NICA Collider”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 18-21. doi:10.18429/JACoW-COOL2019-MOA02
[n] H. Hao, J. Y. Li, and Y. K. Wu, “New Storage Ring Lattice for the Duke FEL Wiggler Switchyard System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC047, pp. 1272-1274.
[n] K. Fuchsberger, J. C. Garnier, A. A. Gorzawski, and E. Motesnitsalis, “Concept and Prototype for a Distributed Analysis Framework for the LHC Machine Data”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC026, pp. 604-607.
[n] M. A. G. Johansson, L.-J. Lindgren, and B. Anderberg, “MAX IV 3 GeV Storage Ring Prototype Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO015, pp. 2427-2429.
[n] R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633.
[n] K. Ohmi et al., “Study for ILC Damping Ring at KEKB”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP059, pp. 676-678.
[n] F. Ghasemi, F. AbbasiDavani, S. Ahmadiannamini, M. Shafiee, M. L. Lamehi Rashti, and H. Shaker, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linear Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD063, pp. 2666-2668.
[n] E. Maclean et al., “Beam-based beam-beam benchmarking and correction”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM010, unpublished.
[n] S. Wu et al., “The mechanism of non-uniform distribution of tin sites on the surface of niobium during the nucleation process”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3043-3045. doi:10.18429/JACoW-IPAC2023-WEPA170
[n] D. C. Hagerman, “805 MHz Power Sources for the LAMPF Accelerator”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper B-2, pp. 76-86.
[n] B. Aune, P. Corveller, M. Jablonka, and J. M. Joly, “A Device for Electron Gun Emittance Measurement”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1896-1899.
[n] K. Honkavaara, “Status of the FLASH FEL User Facility at DESY”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 14-18. doi:10.18429/JACoW-FEL2017-MOD02
[n] T. Liu and Y. Liu, “Analysis of monochromatic properties of crystals under transient thermal loading”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL084, unpublished.
[n] N. Bazin, “Cryomodule Design”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper SATUT01, unpublished.
[n] N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2243-2246. doi:10.18429/JACoW-IPAC2018-WEPAL035
[n] K. Kikuchi, “Invited Paper-On the Status of Accelerator Facilities and Their Progress in Japan”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3124-3130.
[n] I. Saleh, Y. S. Dabain, and A. Ismail, “New Developments on EPICS Drivers, Clients and Tools at SESAME”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 167-169. doi:10.18429/JACoW-ICALEPCS2015-MOPGF033
[n] B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Wittmer, D. Schulte, and F. Zimmermann, “Calculating LHC Tuning Knobs using Various Methods”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT013, pp. 1159-1161.
- G. V. Trubnikov, I. N. Meshkov, G. Shirkov, Ju. Boudagov, Yu. N. Denisov, and A. N. Sissakian, “ILC Siting in Moscow Region Near Dubna and ILC Related Activity at JINR”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TU202, pp. 360-363.
- J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
- J. Manczak et al., “Radiation load studies for the proton target area of a multi-TeV muon collider”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR28, pp. 2544-2547.
- J-J. Gras, D. Belohrad, M. Ludwig, P. Odier, and C. Barschel, “Optimisation of the LHC Beam Current Transformers for Accurate Luminosity Determination”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC155, pp. 1395-1397.
- F. Follin, R. Alemany-Fernandez, and R. Jacobsson, “Online Luminosity Optimization at the LHC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC123, pp. 1351-1354.
- T. Takayanagi, K. Horino, and T. Ueno, “Development of a New Modular Switch Using a Next-Generation Semiconductor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3841-3844.
- I. P. Parajuli, G. Ciovati, W. A. Clemens, J. R. Delayen, A. V. Gurevich, and J. Nice, “Design and Commissioning of a Magnetic Field Scanning System for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 547-549.
- S. Chel, M. Desmons, A. Hamdi, and F. Peauger, “New 1MW 704MHz RF Test Stand at CEA-Saclay”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD022, pp. 490-492.
- Z.-D. Tsai et al., “The Strategy between High Precision Temperature Control and Energy Saving for Air-Conditioning System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD041, pp. 2603-2605.
- M. Di Cosmo, Q. King, R. Murillo-Garcia, D. Nisbet, and B. Todd, “Dependable Implementation of the Beam Interlock Mechanism in CERN Power Converter Controllers”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1975-1978.
- Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
- C. Yao and H. Shang, “Chromaticity Measurement of the APS Booster”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG045, pp. 225-227.
- M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2872-2877.
- T. Mertens, T. Atkinson, F. Gl?Âckner, A. Jankowiak, M. Ries, and A. V. Tsakanian, “Impact of RF Coupler Kicks on Beam Dynamics in BESSY VSR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3182-3184.
- R. L. Lillestol, S. Doebert, A. Latina, D. Schulte, E. Adli, and K. N. Sjobak, “Longitudinal Space Charge Effects in the CLIC Drive Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWA045, pp. 1811-1813.
- S. G. Yaramyshev et al., “Advanced Beam Matching to a High Current RFQ”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP059, pp. 559-562.
- C. Steier et al., “Studies of the Nonlinear Dynamics Effects of APPLE-II Type EPUs at the ALS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH102, pp. 2152-2154.
- G. Torrisi et al., “3D Radio Frequency Simulation of the INFN-LNS Superconducting Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 361-364.
- Z. Sun et al., “Fast Sn-Ion Transport on Nb Surface for Generating NbxSn Thin Films and XPS Depth Profiling”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 727-730.
- M. Rossetti Conti and A. Bacci, “Beam Based Alignment Methods for Cavities and Solenoids in Photo-Injectors”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3247-3250.
- C. Y. Liao, Y.-S. Cheng, K. T. Hsu, K. H. Hu, C. H. Huang, and C. Y. Wu, “Beam Trip Diagnostics for the TPS”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 458-460.
- H. Suk et al., “Underdense Plasma Lens Experiment at the UCLA Neptune Laboratory”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA139, pp. 3708-3710.
- L. Ahrens et al., “High Intensity Proton Acceleration at the Brookhaven AGS - An Update”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P001, pp. 89-91.
- S. Mikhailov et al., “Status of the Booster Injector for the Duke FEL Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE061, pp. 3544-3546.
- H. Hsieh, R. Yourd, and M. Zisman, “Design and Construction of the PEP-II Low-Energy Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP099G, pp. 454-456.
- X. Pang, “Advances in Proton Linac Online Modeling”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2423-2427.
- F. Furuta et al., “Development of superconducting RF cavity in traveling-wave regime at Fermilab”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS24, unpublished.
- L. S. Nadolski, “Methods and Tools to Simulate and Analyse Non-linear Dynamics in Electron Storage Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUXB01, pp. 937-941.
- H. Asano et al., “Operating Experience of the J-PARC Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP004, pp. 55-57.
- T. Y. Chung et al., “Reduction of Dynamic Multipole Content in Insertion Devices Using Flat Wires”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4313-4316.
- L. R. Williams et al., “Design of the High Beta Cryomodule for the HIE-ISOLDE Upgrade at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC105, pp. 319-321.
- M. Y. Huang, L. Huang, N. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the transverse painting during the injection process for CSNS/RCS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2025-2027.
- E. B. Levichev, “A Project of Super Charm-Tau Factory in Novosibirsk”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, paper MOYBA03, pp. XX-XX.
- J. Faure, “The New SATURNE Injector Status Report on the 750 keV Preinjector”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-2, pp. 240-250.
- A. P. Denisov et al., “Design of a Compact Electron Gun for the High-Voltage Electron Cooling System of the NICA Collider”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 18-21.
- H. Hao, J. Y. Li, and Y. K. Wu, “New Storage Ring Lattice for the Duke FEL Wiggler Switchyard System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC047, pp. 1272-1274.
- K. Fuchsberger, J. C. Garnier, A. A. Gorzawski, and E. Motesnitsalis, “Concept and Prototype for a Distributed Analysis Framework for the LHC Machine Data”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC026, pp. 604-607.
- M. A. G. Johansson, L.-J. Lindgren, and B. Anderberg, “MAX IV 3 GeV Storage Ring Prototype Magnet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO015, pp. 2427-2429.
- R. Li and Y. S. Derbenev, “Discussions on the Cancellation Effect on a Curved Orbit”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT019, pp. 1631-1633.
- K. Ohmi et al., “Study for ILC Damping Ring at KEKB”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP059, pp. 676-678.
- F. Ghasemi, F. AbbasiDavani, S. Ahmadiannamini, M. Shafiee, M. L. Lamehi Rashti, and H. Shaker, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linear Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD063, pp. 2666-2668.
- E. Maclean et al., “Beam-based beam-beam benchmarking and correction”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM010, this conference.
- S. Wu et al., “The mechanism of non-uniform distribution of tin sites on the surface of niobium during the nucleation process”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA170, pp. 3043-3045.
- D. C. Hagerman, “805 MHz Power Sources for the LAMPF Accelerator”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper B-2, pp. 76-86.
- B. Aune, P. Corveller, M. Jablonka, and J. M. Joly, “A Device for Electron Gun Emittance Measurement”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1896-1899.
- K. Honkavaara, “Status of the FLASH FEL User Facility at DESY”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 14-18.
- T. Liu and Y. Liu, “Analysis of monochromatic properties of crystals under transient thermal loading”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL084, unpublished.
- N. Bazin, “Cryomodule Design”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper SATUT01, unpublished.
- N. Delerue et al., “The Synchronization System of the Thomx Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2243-2246.
- K. Kikuchi, “Invited Paper-On the Status of Accelerator Facilities and Their Progress in Japan”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3124-3130.
- I. Saleh, Y. S. Dabain, and A. Ismail, “New Developments on EPICS Drivers, Clients and Tools at SESAME”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 167-169.
- B. Fernandes, P. Gessler, and C. Youngman, “High Level FPGA Programming Framework Based on Simulink”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC087, pp. 782-785.
Back to search