Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Golub, “The Effect of Inhomogeneous Magnetic Field on Budker-Chirikov Instability”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAP012, unpublished.
[n] P. Kneisel and M. G. Rao, “Performance of a CEBAF Production Cavity After High-Temperature Heat Treatment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 927-930.
[n] E. Tanabe, G. A. Loew, and J. W. Wang, “Voltage Breakdown at X-Band and C-Band Frequencies”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-11, pp. 458-460.
[n] A. N. Aleshaev, I. V. Belousov, I. E. Borunov, R. G. Gromov, K. V. Gubin, and A. A. Nikiforov, “Forinjector VEPP-5 Klystron Gallery Control System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP41, pp. 750-752.
[n] M. F. Fernandes et al., “Operation of a Cryogenic Current Comparator with Nanoampere Resolution for Continuous Beam Intensity Measurements in the Antiproton Decelerator at CERN”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4741-4744. doi:10.18429/JACoW-IPAC2018-THPML044
[n] M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
[n] J. W. Wang and G. A. Loew, “HEM11 Modes Revisited”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO433, pp. 135-137.
[n] S. Maier et al., “Design Considerations of the Corrugated Structures in a Vacuum Chamber for Impedance Studies at KARA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 100-104. doi:10.18429/JACoW-IBIC2022-MOP27
[n] M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
[n] G. H?Âr and R. Standke, “Cyclotron Produced Isotopes for Medical Applications”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-01, pp. 502-506.
[n] G. A. Loew, “The SLAC Linear Collider and a Few Ideas on Future Linear Colliders”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WED0002, pp. 282-287.
[n] P. M. McIntyre, J. Breitschopf, D. C. V. Chavez, J. N. Kellams, and A. Sattarov, “LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 552-555. doi:10.18429/JACoW-IPAC2019-MOPMP048
[n] P. Kneisel, H. F. Dylla, and M. G. Rao, “Solvents and Pumpdown Characteristics of SRF Nb Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3867-3870.
[n] T. Kato and Y. Yamazaki, “Design of the JHF 200-MeV Proton Linear Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D010, pp. 98-100.
[n] H. Mizuno et al., “Vacuum Characteristics of the RF Caviity for TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1957-1960.
[n] K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
[n] Y. Golub, “New Vortices in Axisymmetric Beams in Inhomogeneous Magnetic Field”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAP011, unpublished.
[n] W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
[n] J. Y. Yoon et al., “Design Study of 325MHz RF Power Coupler for Superconducting Cavity”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2937-2939. doi:10.18429/JACoW-IPAC2019-WEPRB056
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Golub, “The Effect of Inhomogeneous Magnetic Field on Budker-Chirikov Instability”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP012, unpublished.
- P. Kneisel and M. G. Rao, “Performance of a CEBAF Production Cavity After High-Temperature Heat Treatment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 927-930.
- E. Tanabe, G. A. Loew, and J. W. Wang, “Voltage Breakdown at X-Band and C-Band Frequencies”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-11, pp. 458-460.
- A. N. Aleshaev, I. V. Belousov, I. E. Borunov, R. G. Gromov, K. V. Gubin, and A. A. Nikiforov, “Forinjector VEPP-5 Klystron Gallery Control System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP41, pp. 750-752.
- M. F. Fernandes et al., “Operation of a Cryogenic Current Comparator with Nanoampere Resolution for Continuous Beam Intensity Measurements in the Antiproton Decelerator at CERN”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4741-4744.
- M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX.
- J. W. Wang and G. A. Loew, “HEM11 Modes Revisited”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO433, pp. 135-137.
- S. Maier et al., “Design Considerations of the Corrugated Structures in a Vacuum Chamber for Impedance Studies at KARA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 100-104.
- M. G. Rao, “CEBAF Linac Cryogenic Instrumentation Requirements and a Review of the Available Sensors”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-17, pp. 348-350.
- G. H?Âr and R. Standke, “Cyclotron Produced Isotopes for Medical Applications”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-01, pp. 502-506.
- G. A. Loew, “The SLAC Linear Collider and a Few Ideas on Future Linear Colliders”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WED0002, pp. 282-287.
- P. M. McIntyre, J. Breitschopf, D. C. V. Chavez, J. N. Kellams, and A. Sattarov, “LHC Doubler: CIC Dipole Technology May Make It Feasible and Affordable”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 552-555.
- P. Kneisel, H. F. Dylla, and M. G. Rao, “Solvents and Pumpdown Characteristics of SRF Nb Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3867-3870.
- T. Kato and Y. Yamazaki, “Design of the JHF 200-MeV Proton Linear Accelerator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D010, pp. 98-100.
- H. Mizuno et al., “Vacuum Characteristics of the RF Caviity for TRISTAN Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1957-1960.
- K. Bertsche, “Optimal Placement of Profile Monitors in a Mismatched FODO Lattice”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ21, pp. 2503-2505.
- Y. Golub, “New Vortices in Axisymmetric Beams in Inhomogeneous Magnetic Field”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP011, unpublished.
- W. Mexner, E. Iurchenko, H. Pasic, D. Ressmann, and T. Spangenberg, “A New Flexible Integration of NeXus Datasets to ANKA by Fuse File Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC008, pp. 566-569.
- J. Y. Yoon et al., “Design Study of 325MHz RF Power Coupler for Superconducting Cavity”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2937-2939.
Back to search