Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. J. Lee, J. Griswold, S.-H. Kim, and S. Cousineau, “Radioisotope production at the Spallation Neutron Source: Design concept of isotope production target”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1097-1101. doi:10.18429/JACoW-NAPAC2025-THP066
[n] T. Podzorny et al., “Data acquisition and supervision systems for the HL-LHC quench protection system - part I the hardware”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3992-3995. doi:10.18429/JACoW-IPAC2023-THPA023
[n] C. Adolphsen, Z. Li, K. Ko, R. H. Miller, K. L. F. Bane, and V. Dolgashev, “Higher Dipole Bands in the NLC Accelerating Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA18, pp. 422-424.
[n] T. Xu et al., “Electron beam current spike formation for short pulse generation with two lasers”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP047, unpublished.
[n] J. Griswold et al., “Radioisotope production at SNS (RIPS)”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1089-1093. doi:10.18429/JACoW-NAPAC2025-THP064
[n] S. Sato, T. Furukawa, and K. Noda, “Development of Intensity Control System with RF-knockout Extraction at the HIMAC Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH170, pp. 2331-2333.
[n] M. Behtouei et al., “Studies of a Ka-Band High Power Klystron Amplifier at INFN-LNF”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 683-686. doi:10.18429/JACoW-IPAC2022-MOPOMS022
[n] A. Jain et al., “Injection of collider-quality e-beams in plasma accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR60, unpublished.
[n] J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP049, unpublished.
[n] T.-J. Kuo et al., “Design of prototype magnet for FETS-FFA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 464-466. doi:10.18429/JACoW-IPAC2024-MOPR05
[n] I. Rodriguez, S. Lawrie, and J. Speed, “Design of an electrostatic chopper for the new ISIS MEBT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2223-2226. doi:10.18429/JACoW-IPAC2023-TUPM016
[n] T. Kosuge, P. Duval, H. Ishii, Y. Nagatani, H. Nitani, and J. Szczesny, “Development of ACOP .NET STARS Transport Layer”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 144-147. doi:10.18429/JACoW-PCaPAC2018-THCB2
[n] S. G. Arutunian, I. E. Vasiniuk, G. Decker, and G. S. Harutyunyan, “HEAT COUPLING IN MULTI-WIRE VIBRATING WIRE MONITOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH02, pp. XX-XX.
[n] I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n] N. Majernik et al., “Rotor-based multileaf collimator for beam shaping”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP085, unpublished.
[n] J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP012, unpublished.
[n] Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 733-736. doi:10.18429/JACoW-IPAC2025-MOPS052
[n] R. E. Laxdal, M. Marchetto, and A. Bylinskii, “Beam Dynamics Studies on the ISAC-II Superconducting Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP031, pp. 312-314.
[n] Y. J. Lee, I. Popova, J. Griswold, S.-H. Kim, S. Cousineau, and W. Willis, “Radioisotope production at the Spallation Neutron Source: Design concept of experimental target station”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1093-1097. doi:10.18429/JACoW-NAPAC2025-THP065
[n] R. Robles and A. Marinelli, “Stability and scalability of superradiant amplification in attosecond X-ray free-electron lasers”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG63, unpublished.
[n] S. G. Tantawi and V. Dolgashev, “2D Simulation of High-Efficiency Cross-Field RF Power Sources”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA06, pp. 748-750.
[n] Y. Shi, X. Shi, and H. Xu, “Study on energy stability of high-charge bunches from laser plasma accelerators for ring injectors”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3609, unpublished.
[n] R. Robles, Z. Huang, and A. Marinelli, “Revisiting Intrabeam Scattering for Laminar Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2221-2224. doi:10.18429/JACoW-IPAC2022-WEPOTK065
[n] E. L. Flannigan et al., “Space Charge Compensation Time Measurement for a Pulsed, High-Current H- Ion Beam”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6093, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. J. Lee, J. Griswold, S.-H. Kim, and S. Cousineau, “Radioisotope production at the Spallation Neutron Source: Design concept of isotope production target”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1097-1101.
- T. Podzorny et al., “Data acquisition and supervision systems for the HL-LHC quench protection system - part I the hardware”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA023, pp. 3992-3995.
- C. Adolphsen, Z. Li, K. Ko, R. H. Miller, K. L. F. Bane, and V. Dolgashev, “Higher Dipole Bands in the NLC Accelerating Structure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA18, pp. 422-424.
- T. Xu et al., “Electron beam current spike formation for short pulse generation with two lasers”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP047, unpublished.
- J. Griswold et al., “Radioisotope production at SNS (RIPS)”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1089-1093.
- S. Sato, T. Furukawa, and K. Noda, “Development of Intensity Control System with RF-knockout Extraction at the HIMAC Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH170, pp. 2331-2333.
- M. Behtouei et al., “Studies of a Ka-Band High Power Klystron Amplifier at INFN-LNF”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 683-686.
- A. Jain et al., “Injection of collider-quality e-beams in plasma accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR60, unpublished.
- J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THP049, unpublished.
- T.-J. Kuo et al., “Design of prototype magnet for FETS-FFA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR05, pp. 464-466.
- I. Rodriguez, S. Lawrie, and J. Speed, “Design of an electrostatic chopper for the new ISIS MEBT”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM016, pp. 2223-2226.
- T. Kosuge, P. Duval, H. Ishii, Y. Nagatani, H. Nitani, and J. Szczesny, “Development of ACOP .NET STARS Transport Layer”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 144-147.
- S. G. Arutunian, I. E. Vasiniuk, G. Decker, and G. S. Harutyunyan, “HEAT COUPLING IN MULTI-WIRE VIBRATING WIRE MONITOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH02, pp. XX-XX.
- I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA062, pp. 4105-4108.
- N. Majernik et al., “Rotor-based multileaf collimator for beam shaping”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper MOP085, unpublished.
- J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP012, unpublished.
- Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS052, pp. 733-736.
- R. E. Laxdal, M. Marchetto, and A. Bylinskii, “Beam Dynamics Studies on the ISAC-II Superconducting Linac”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP031, pp. 312-314.
- Y. J. Lee, I. Popova, J. Griswold, S.-H. Kim, S. Cousineau, and W. Willis, “Radioisotope production at the Spallation Neutron Source: Design concept of experimental target station”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 1093-1097.
- R. Robles and A. Marinelli, “Stability and scalability of superradiant amplification in attosecond X-ray free-electron lasers”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG63, unpublished.
- S. G. Tantawi and V. Dolgashev, “2D Simulation of High-Efficiency Cross-Field RF Power Sources”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA06, pp. 748-750.
- Y. Shi, X. Shi, and H. Xu, “Study on energy stability of high-charge bunches from laser plasma accelerators for ring injectors”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3609, this conference.
- R. Robles, Z. Huang, and A. Marinelli, “Revisiting Intrabeam Scattering for Laminar Beams”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2221-2224.
- E. L. Flannigan et al., “Space Charge Compensation Time Measurement for a Pulsed, High-Current H- Ion Beam”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6093, this conference.
Back to search