Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Cuperus, “An Interactive Alarm System for the CERN PS Accelerator Complex”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2337-2340.
[n] C. Takahashi et al., “Multi-Dimensional Feedforward Controller at MAX IV”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 335-338. doi:10.18429/JACoW-IBIC2022-TUP41
[n] R. Wang and B. Shao, “A Diagnostic System for Measuring Profile of the Beam Lines”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-07, pp. 298-300.
[n] L. H. Yu, “Design Parameters of the High Gain Harmonic Generation Experiment using Cornell Undulator at the ATF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP92, pp. 2474-2476.
[n] M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
[n] P. M. Stefan, S. Krinsky, G. Rakowsky, and L. Solomon, “NSLS Prototype Small-Gap Undulator (PSGU)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1096-1099.
[n] P. Emma, “First Lasing of the LCLS X-Ray FEL at 1.5 ?à”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3PBI01, pp. 3115-3119.
[n] S. A. Bogacz, D. B. Cline, P. H. Sandler, and D. A. Sanders, “Muon Cooling and Acceleration Experiment at TRIUMF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB20, pp. 790-792.
[n] M. Berglund and S. Y. Lee, “Overlapping Synchrotron Sideband Resonances”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP050G, pp. 1051-1053.
[n] P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n] D. J. S. Findlay et al., “RF-Tuning of the ISIS-RFQ”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B01, pp. 869-871.
[n] D. A. Ovsyannikov, “Mathematical Modeling and Optimization of Beam Dynamics in Accelerators”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUZCH02, pp. 68-72.
[n] G. Brianti and P. Skarek, “A Strong Focusing Ring, as Beam Stretcher for Synchro-Cyclotrons”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-008, pp. XX-XX.
[n] O. Mouton and D. Guilhem, “Thin Foil Physical Effects on the Transport of an Intense Relativistic Electron Beam”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE097, pp. 1374-1376.
[n] J. Boillot et al., “Operation-Oriented Computer Controls for CERN PS Complex”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2261-2264.
[n] R. J. England, M. J. Hogan, J. B. Rosenzweig, and G. Travish, “Longitudinal Shaping of Electron Bunches with Applications to the Plasma Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH3GBI02, pp. 3105-3105.
[n] J. Prenting et al., “High Precision Survey and Alignment of Large Linear Accelerators”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP38, pp. 690-692.
[n] D. W. Posthuma de Boer, B. A. Orton, C. M. Warsop, and R. E. Williamson, “Development of an Impedance Model for the ISIS Synchrotron and Predictions for the Head-Tail Instability”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 170-177. doi:10.18429/JACoW-HB2023-TUC4I2
[n] S. M. Scott, “Training the Next Generation of Engineers for Photon Based Light Sources”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 421-423. doi:10.18429/JACoW-MEDSI2018-THPH40
[n] R. E. Timm, J. Forrestal, R. Hogrefe, and D. Voss, “Data Acquisition and Control of the Zero Gradient Synchrotron 500 MeV Booster Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1730-1733.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Cuperus, “An Interactive Alarm System for the CERN PS Accelerator Complex”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2337-2340.
- C. Takahashi et al., “Multi-Dimensional Feedforward Controller at MAX IV”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 335-338.
- R. Wang and B. Shao, “A Diagnostic System for Measuring Profile of the Beam Lines”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-07, pp. 298-300.
- L. H. Yu, “Design Parameters of the High Gain Harmonic Generation Experiment using Cornell Undulator at the ATF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP92, pp. 2474-2476.
- M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
- P. M. Stefan, S. Krinsky, G. Rakowsky, and L. Solomon, “NSLS Prototype Small-Gap Undulator (PSGU)”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1096-1099.
- P. Emma, “First Lasing of the LCLS X-Ray FEL at 1.5 ?à”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH3PBI01, pp. 3115-3119.
- S. A. Bogacz, D. B. Cline, P. H. Sandler, and D. A. Sanders, “Muon Cooling and Acceleration Experiment at TRIUMF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB20, pp. 790-792.
- M. Berglund and S. Y. Lee, “Overlapping Synchrotron Sideband Resonances”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP050G, pp. 1051-1053.
- P. P. Goryl et al., “Tango Controls RFCs”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 317-321.
- D. J. S. Findlay et al., “RF-Tuning of the ISIS-RFQ”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B01, pp. 869-871.
- D. A. Ovsyannikov, “Mathematical Modeling and Optimization of Beam Dynamics in Accelerators”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUZCH02, pp. 68-72.
- G. Brianti and P. Skarek, “A Strong Focusing Ring, as Beam Stretcher for Synchro-Cyclotrons”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-008, pp. XX-XX.
- O. Mouton and D. Guilhem, “Thin Foil Physical Effects on the Transport of an Intense Relativistic Electron Beam”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE097, pp. 1374-1376.
- J. Boillot et al., “Operation-Oriented Computer Controls for CERN PS Complex”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2261-2264.
- R. J. England, M. J. Hogan, J. B. Rosenzweig, and G. Travish, “Longitudinal Shaping of Electron Bunches with Applications to the Plasma Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH3GBI02, pp. 3105-3105.
- J. Prenting et al., “High Precision Survey and Alignment of Large Linear Accelerators”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP38, pp. 690-692.
- D. W. Posthuma de Boer, B. A. Orton, C. M. Warsop, and R. E. Williamson, “Development of an Impedance Model for the ISIS Synchrotron and Predictions for the Head-Tail Instability”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC4I2, pp. 170-177.
- S. M. Scott, “Training the Next Generation of Engineers for Photon Based Light Sources”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 421-423.
- R. E. Timm, J. Forrestal, R. Hogrefe, and D. Voss, “Data Acquisition and Control of the Zero Gradient Synchrotron 500 MeV Booster Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1730-1733.
Back to search