Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Andersson et al., “Machine Protection Risk Management of the ESS Target System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1876-1879. doi:10.18429/JACoW-IPAC2017-TUPIK078
[n] A. Markovik, G. P?Âplau, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Dynamics of Ion Distributions in Beam Guiding Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1668-1670. doi:10.18429/JACoW-IPAC2014-TUPRI046
[n] C. Adolphsen et al., “Emittance and Energy Control in the NLC Main Linacs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ17, pp. 2989-2991.
[n] R. Valizadeh, C. Benjamin, and J. Conlon, “Using HiPIMS to Deposit V3Si Super Conducting Thin Films of Single Target Deposition”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL146, unpublished.
[n] L. G. Lewis, C. S. Chien, R. George, G. Gunderson, M. J. Knott, and A. Valente, “Capabilities and Uses of a Graphic Display System as an Interface Between the Zero Gradient Synchrotron Computer and the Human Operator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 827-832.
[n] Y. Bao, A. Afanasev, Y. S. Derbenev, V. S. Morozov, A. V. Sy, and R. P. Johnson, “Optimization of a Skew Parametric Resonance Ionization Cooling Channel Using Genetic Algorithm”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 111-113. doi:10.18429/JACoW-IPAC2017-MOPAB015
[n] D. Amano, T. Hori, and T. Takayama, “Beam Measurements of Compact SR Ring AURORA-2S""”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A14, pp. 604-606.
[n] P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
[n] F. Marti and S. Snyder, “Internal Beam Dynamics Studies with a TV Probe”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-05, pp. 435-438.
[n] J. Rose et al., “NSLS-II RF Systems”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROBS4, pp. 2583-2585.
[n] A. Elzhov et al., “New Scheme of Two Beam Accelerator Driver on Base on Linear Induction Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP29C, pp. 472-474.
[n] A. J. Dick, M. B. Andorf, and P. Piot, “Progress Toward a Laser Amplifier for Optical Stochastic Cooling”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 434-436. doi:10.18429/JACoW-NAPAC2019-TUPLM26
[n] D. Daminelli, F. K. G. Hoshino, A. P. B. Lima, and M. Souza, “Sirius Storage Ring RF Plant Identification”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 865-867. doi:10.18429/JACoW-IPAC2022-TUPOST012
[n] N. Evans et al., “Commissioning 1.7 MW, 1.3 GeV beam for the proton power upgrade at SNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THBN1, unpublished.
[n] R. Cassel et al., “SLC Kicker Magnet Limitations”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 996-999.
[n] S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 160-163. doi:10.18429/JACoW-NAPAC2022-MOPA50
[n] I. Khokhriakov, V. Mazalova, and O. Merkulova, “Improving Observability of the SCADA Systems Using Elastic APM, Reactive Streams and Asynchronous Communication”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1016-1021. doi:10.18429/JACoW-ICALEPCS2023-WE3BCO04
[n] P. P. Goryl, M. Liszcz, R. Bourtembourg, A. Gotz, and V. H. Hardion, “Towards Improved Accessibility of the Tango Controls”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 327. doi:10.18429/JACoW-ICALEPCS2019-MOPHA050
[n] T. Satogata et al., “Multi-Million-Turn Beam Position Monitors for RHIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG047, pp. 2697-2699.
[n] N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
[n] K. Koyama, A. Maekawa, H. Masuda, Y. Oishi, and M. Uesaka, “All-optical Hard X-ray Sources and their Application to Nuclear Engineering”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC004, pp. 4065-4067.
[n] M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
[n] B. Z. Movshevich, “FORMERS OF HIGH VOLTAGE RECTANGULAR IMPULSES FOR POWERFUL MICROWAVE DEVICESFORMERS OF HIGH VOLTAGE RECTANGULAR IMPULSES FOR POWERFUL MICROWAVE DEVICES”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH04, pp. XX-XX.
[n] F. Marti and P. S. Miller, “Magnetic Field Imperfections in the K500 Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B25, pp. 107-110.
[n] N. Liu, J. S. Diamond, N. Eddy, A. Ibrahim, N. Patel, and A. Semenov, “Beam Intensity Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 330-332. doi:10.18429/JACoW-NAPAC2016-TUPOA24
[n] S. M. Polozov, A. S. Panishev, and V. L. Shatokhin, “Optimization of Accelerators Vacuum Structures Pumping”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 361-363. doi:10.18429/JACoW-RuPAC2021-WEPSC10
For LaTeX
Use Complete Form
For BibTeX
References
- R. Andersson et al., “Machine Protection Risk Management of the ESS Target System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1876-1879.
- A. Markovik, G. P?Âplau, U. van Rienen, W. Hillert, D. Sauerland, and A. Meseck, “Dynamics of Ion Distributions in Beam Guiding Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1668-1670.
- C. Adolphsen et al., “Emittance and Energy Control in the NLC Main Linacs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ17, pp. 2989-2991.
- R. Valizadeh, C. Benjamin, and J. Conlon, “Using HiPIMS to Deposit V3Si Super Conducting Thin Films of Single Target Deposition”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL146, unpublished.
- L. G. Lewis, C. S. Chien, R. George, G. Gunderson, M. J. Knott, and A. Valente, “Capabilities and Uses of a Graphic Display System as an Interface Between the Zero Gradient Synchrotron Computer and the Human Operator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 827-832.
- Y. Bao, A. Afanasev, Y. S. Derbenev, V. S. Morozov, A. V. Sy, and R. P. Johnson, “Optimization of a Skew Parametric Resonance Ionization Cooling Channel Using Genetic Algorithm”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 111-113.
- D. Amano, T. Hori, and T. Takayama, “Beam Measurements of Compact SR Ring AURORA-2S""”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A14, pp. 604-606.
- P. M. Strubin and N. N. Trofimov, “First Experience with Control and Operational Models for Vacuum Equipment in the AD Decelerator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL4, pp. 346-348.
- F. Marti and S. Snyder, “Internal Beam Dynamics Studies with a TV Probe”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-05, pp. 435-438.
- J. Rose et al., “NSLS-II RF Systems”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper FROBS4, pp. 2583-2585.
- A. Elzhov et al., “New Scheme of Two Beam Accelerator Driver on Base on Linear Induction Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP29C, pp. 472-474.
- A. J. Dick, M. B. Andorf, and P. Piot, “Progress Toward a Laser Amplifier for Optical Stochastic Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 434-436.
- D. Daminelli, F. K. G. Hoshino, A. P. B. Lima, and M. Souza, “Sirius Storage Ring RF Plant Identification”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 865-867.
- N. Evans et al., “Commissioning 1.7 MW, 1.3 GeV beam for the proton power upgrade at SNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THBN1, this conference.
- R. Cassel et al., “SLC Kicker Magnet Limitations”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 996-999.
- S. J. Coleman et al., “Integrated Photonics Structure Cathodes for Longitudinally Shaped Bunch Trains”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 160-163.
- I. Khokhriakov, V. Mazalova, and O. Merkulova, “Improving Observability of the SCADA Systems Using Elastic APM, Reactive Streams and Asynchronous Communication”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE3BCO04, pp. 1016-1021.
- P. P. Goryl, M. Liszcz, R. Bourtembourg, A. Gotz, and V. H. Hardion, “Towards Improved Accessibility of the Tango Controls”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 327.
- T. Satogata et al., “Multi-Million-Turn Beam Position Monitors for RHIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG047, pp. 2697-2699.
- N. Gelfand et al., “US-LHC IR Magnet Error Analysis and Compensation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11C, pp. 380-384.
- K. Koyama, A. Maekawa, H. Masuda, Y. Oishi, and M. Uesaka, “All-optical Hard X-ray Sources and their Application to Nuclear Engineering”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC004, pp. 4065-4067.
- M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502.
- B. Z. Movshevich, “FORMERS OF HIGH VOLTAGE RECTANGULAR IMPULSES FOR POWERFUL MICROWAVE DEVICESFORMERS OF HIGH VOLTAGE RECTANGULAR IMPULSES FOR POWERFUL MICROWAVE DEVICES”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH04, pp. XX-XX.
- F. Marti and P. S. Miller, “Magnetic Field Imperfections in the K500 Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B25, pp. 107-110.
- N. Liu, J. S. Diamond, N. Eddy, A. Ibrahim, N. Patel, and A. Semenov, “Beam Intensity Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 330-332.
- S. M. Polozov, A. S. Panishev, and V. L. Shatokhin, “Optimization of Accelerators Vacuum Structures Pumping”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC10, pp. 361-363.
Back to search