Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2829-2832. doi:10.18429/JACoW-IPAC2016-WEPOW008
[n] W. Anders et al., “Renewal of Bessy Ii Rf System - Solid State Amplifiers and Hom Damped Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4127-4129. doi:10.18429/JACoW-IPAC2017-THPIK013
[n] S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
[n] N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2542-2544. doi:10.18429/JACoW-IPAC2016-WEPMY003
[n] N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
[n] E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
[n] B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 524-527.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] T. Ganbold et al., “Fast, Multi-band Photon Detectors based on Quantum Well Devices for Beam-monitoring in New Generation Light Sources”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP097, pp. 600-602.
[n] T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
[n] M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
[n] J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
[n] M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
[n] C. Curtis, “Ion Source and Injector Development”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
[n] C. Benedetti, A. Sgattoni, and P. Tomassini, “ALaDyn: a High Accuracy Code for the Laser-plasma Interaction”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP127, pp. 2794-2796.
[n] J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
[n] E. D. Hudson, M. L. Mallory, and S. W. Mosko, “High Performance Heavy-Ion Source for Cyclotrons”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 113-118.
[n] M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
[n] F. Chmara and R. Charpentier, “Recent Advances and Developments in Electrostatic Accelerators”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 123-126.
[n] C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
[n] W. D. Rush and J. Shi, “Two-Dimensional Calculation of Channeling Radiation Spectrum for High-Brightness Hard X-Ray Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1888-1890. doi:10.18429/JACoW-IPAC2015-TUPMA023
[n] E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 752-755. doi:10.18429/JACoW-IPAC2025-MOPS061
[n] M. S. Hutton et al., “Visualization of Experimental Data at the National Ignition Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC126, pp. 879-882.
[n] A. Kovach, J. Grillenberger, A. S. Parfenova, and M. Seidel, “Energy Efficiency and Saving Potential Analysis of the High Intensity Proton Accelerator HIPA at PSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2399-2402. doi:10.18429/JACoW-IPAC2017-TUPVA129
For LaTeX
Use Complete Form
For BibTeX
References
- J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2829-2832.
- W. Anders et al., “Renewal of Bessy Ii Rf System - Solid State Amplifiers and Hom Damped Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4127-4129.
- S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
- N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2542-2544.
- N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
- E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
- B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 524-527.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- T. Ganbold et al., “Fast, Multi-band Photon Detectors based on Quantum Well Devices for Beam-monitoring in New Generation Light Sources”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP097, pp. 600-602.
- T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 876-879.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
- M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
- J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2381-2383.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
- M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
- C. Curtis, “Ion Source and Injector Development”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188.
- C. Benedetti, A. Sgattoni, and P. Tomassini, “ALaDyn: a High Accuracy Code for the Laser-plasma Interaction”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP127, pp. 2794-2796.
- J. C. Chang, J. R. Chen, and C. Y. Liu, “Air Temperature Control Improvement for the Storage Ring Tunnel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG025, pp. 1482-1484.
- E. D. Hudson, M. L. Mallory, and S. W. Mosko, “High Performance Heavy-Ion Source for Cyclotrons”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 113-118.
- M. Ivanyan and V. Tsakanov, “The Analytical Treatment of Resistive Wake in Round Pipe”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH308, pp. 3194-3196.
- F. Chmara and R. Charpentier, “Recent Advances and Developments in Electrostatic Accelerators”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 123-126.
- C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
- W. D. Rush and J. Shi, “Two-Dimensional Calculation of Channeling Radiation Spectrum for High-Brightness Hard X-Ray Production”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1888-1890.
- E. Al-Dmour et al., “MAX 4U: an upgrade of the MAX IV 3 GeV ring”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS061, pp. 752-755.
- M. S. Hutton et al., “Visualization of Experimental Data at the National Ignition Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC126, pp. 879-882.
- A. Kovach, J. Grillenberger, A. S. Parfenova, and M. Seidel, “Energy Efficiency and Saving Potential Analysis of the High Intensity Proton Accelerator HIPA at PSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2399-2402.
Back to search