Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. vanZeijts, “Model Driven Ramp Control at RHIC”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRBT004, pp. XX-XX.
[n] O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 836-839. doi:10.18429/JACoW-IPAC2025-MOPS141
[n] M. Komiyama, M. Fujimaki, N. Fukunishi, K. Kumagai, A. Uchiyama, and T. Nakamura, “Recent Updates on the RIKEN RI Beam Factory Control System”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA27, pp. 104-106.
[n] T. Vecchione et al., “SLAC RF Gun Photocathode Test Facility”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO84, pp. 427-430.
[n] J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 266-269.
[n] S. G. Biedron et al., “The APS SASE FEL: Modeling and Code Comparison”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP96, pp. 2486-2488.
[n] R. Nelson, B. Oerter, T. Shea, and C. Sibley, “SNS Timing System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRAT001, pp. XX-XX.
[n] A. Toyoda et al., “Development of Radiation Registant Optics System for High Intensity Proton Beamline at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE024, pp. 1017-1019.
[n] G. Ha, M.-H. Cho, W. Namkung, W. Gai, K.-J. Kim, and J. G. Power, “High Resolution Longitudinal Property Measurement using Emittance Exchange Beam Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 320-322. doi:10.18429/JACoW-IPAC2015-MOPJE020
[n] S. B. van der Geer, G. J. H. Brussaard, O. J. Luiten, M. J. de Loos, and M. J. van der Wiel, “A 1 GV/m Laser-Triggered Compact Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI079, pp. 989-991.
[n] M. A. Palmer, J. A. Crittenden, J. Kandaswamy, T. I. O, and A. Temnykh, “Design, Fabrication and Characterization of a Large-Aperture Quadrupole Magnet for CESR-c”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT080, pp. 4063-4065.
[n] K. P. Koepke, “Status of the Tevatron Low Beta And Separator Projects”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 397-400.
[n] Y. Cai and I. Reichel, “New Method of Dispersion Correction in the PEP-II Low Energy Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A09, pp. 1069-1070.
[n] K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
[n] A. Uchiyama, K. Furukawa, Y. Higurashi, M. Komiyama, T. Nakagawa, and K. Ozeki, “Design of Web-based Interface to RIKEN 28 GHz Super-conducting ECR Ion Source and the Future Plan”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP12, pp. 61-63.
[n] J. Branlard et al., “Capture Cavity II Results at FNAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN092, pp. 2245-2247.
[n] Z. J. Ma, Y. D. Ding, N. Li, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “Radiation Shielding Considerations for CEPC-SPPC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2722-2724. doi:10.18429/JACoW-IPAC2016-WEPOR023
[n] R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
[n] I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
[n] A. A. Ogloblin, “Radioactive Beams for Material Engineering”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-04, pp. 150-153.
[n] F. A. Nezrick, “Fermilab Neutrino - Horn Focussing System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1479-1484.
[n] T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
[n] Z. Zheng, Z. Liu, J. Wei, Y. Zhang, and S. Zhao, “ADRC Control for Beam Loading and Microphonics”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB061, pp. 615-617.
[n] R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
[n] Y. Liu, S. Assadi, W. P. Grice, and C. D. Long, “Laser Wire Beam Profile Monitor at Spallation Neutron Source (SNS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC061, pp. 1197-1199.
[n] G. Ha, M.-H. Cho, W. Namkung, W. Gai, K.-J. Kim, and J. G. Power, “Categorization and Estimation of Possible Deformation in Emittance Exchange based Current Profile Shaping”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 317-319. doi:10.18429/JACoW-IPAC2015-MOPJE019
[n] O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Conceptual study of multi-turn injection for SIS100 as a long-term perspective”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 832-835. doi:10.18429/JACoW-IPAC2025-MOPS140
[n] K. Ozeki et al., “Status Report on the Operation of the RIBF Ring Cyclotrons”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB01, pp. 191-193.
For LaTeX
Use Complete Form
For BibTeX
References
- J. vanZeijts, “Model Driven Ramp Control at RHIC”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRBT004, pp. XX-XX.
- O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Enhancing beam intensity in SIS18 by a two-plane multi-turn injection approach”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS141, pp. 836-839.
- M. Komiyama, M. Fujimaki, N. Fukunishi, K. Kumagai, A. Uchiyama, and T. Nakamura, “Recent Updates on the RIKEN RI Beam Factory Control System”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA27, pp. 104-106.
- T. Vecchione et al., “SLAC RF Gun Photocathode Test Facility”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO84, pp. 427-430.
- J. M. Peterson et al., “Dynamic Aperture Measurements at the Tevatron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 266-269.
- S. G. Biedron et al., “The APS SASE FEL: Modeling and Code Comparison”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP96, pp. 2486-2488.
- R. Nelson, B. Oerter, T. Shea, and C. Sibley, “SNS Timing System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRAT001, pp. XX-XX.
- A. Toyoda et al., “Development of Radiation Registant Optics System for High Intensity Proton Beamline at the J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE024, pp. 1017-1019.
- G. Ha, M.-H. Cho, W. Namkung, W. Gai, K.-J. Kim, and J. G. Power, “High Resolution Longitudinal Property Measurement using Emittance Exchange Beam Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 320-322.
- S. B. van der Geer, G. J. H. Brussaard, O. J. Luiten, M. J. de Loos, and M. J. van der Wiel, “A 1 GV/m Laser-Triggered Compact Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI079, pp. 989-991.
- M. A. Palmer, J. A. Crittenden, J. Kandaswamy, T. I. O, and A. Temnykh, “Design, Fabrication and Characterization of a Large-Aperture Quadrupole Magnet for CESR-c”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT080, pp. 4063-4065.
- K. P. Koepke, “Status of the Tevatron Low Beta And Separator Projects”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 397-400.
- Y. Cai and I. Reichel, “New Method of Dispersion Correction in the PEP-II Low Energy Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A09, pp. 1069-1070.
- K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
- A. Uchiyama, K. Furukawa, Y. Higurashi, M. Komiyama, T. Nakagawa, and K. Ozeki, “Design of Web-based Interface to RIKEN 28 GHz Super-conducting ECR Ion Source and the Future Plan”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP12, pp. 61-63.
- J. Branlard et al., “Capture Cavity II Results at FNAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN092, pp. 2245-2247.
- Z. J. Ma, Y. D. Ding, N. Li, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “Radiation Shielding Considerations for CEPC-SPPC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2722-2724.
- R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
- I. Reichel, “Injection and Extraction Lines for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN115, pp. 2984-2986.
- A. A. Ogloblin, “Radioactive Beams for Material Engineering”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper D-04, pp. 150-153.
- F. A. Nezrick, “Fermilab Neutrino - Horn Focussing System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1479-1484.
- T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
- Z. Zheng, Z. Liu, J. Wei, Y. Zhang, and S. Zhao, “ADRC Control for Beam Loading and Microphonics”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB061, pp. 615-617.
- R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
- Y. Liu, S. Assadi, W. P. Grice, and C. D. Long, “Laser Wire Beam Profile Monitor at Spallation Neutron Source (SNS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC061, pp. 1197-1199.
- G. Ha, M.-H. Cho, W. Namkung, W. Gai, K.-J. Kim, and J. G. Power, “Categorization and Estimation of Possible Deformation in Emittance Exchange based Current Profile Shaping”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 317-319.
- O. Dolinskyy, Y. El Hayek, D. Ondreka, and P. Spiller, “Conceptual study of multi-turn injection for SIS100 as a long-term perspective”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS140, pp. 832-835.
- K. Ozeki et al., “Status Report on the Operation of the RIBF Ring Cyclotrons”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB01, pp. 191-193.
Back to search