JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	T. R. Bieler et al., “Effect of Heating Rate on Recrystallization in Rolled Multicrystals of Pure Niobium”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 396. doi:10.18429/JACoW-SRF2021-TUPFDV001
[n]	T. Kurita, S. Fukumoto, S. H. Hatori, and S. Ninomiya, “An Improvement of Matching Circuit of RF Kicker Electrodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS114, pp. 1771-1773. 
[n]	J. W. Lewellen et al., “Technology Maturation for the MaRIE 1.0 X-FEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 181-184. doi:10.18429/JACoW-FEL2015-MOP062
[n]	E. Mulyani, J. W. Flanagan, H. Fukuma, H. Ikeda, and M. Tobiyama, “Image Reconstruction Technique Based on Coded Aperture Imaging for SuperKEKB X-ray Beam Size Monitor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4819-4822. doi:10.18429/JACoW-IPAC2018-THPML074
[n]	J. W. Lewellen and F. L. Krawczyk, “Simulation of Alpha Magnet Elements in Dipole-only Tracking Codes”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP023, pp. 735-738. 
[n]	K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 294-296. doi:10.18429/JACoW-Cyclotrons2016-THB03
[n]	K. Masuda et al., “Beam Property Measurements on the KU-FEL Linac”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS23, pp. XX-XX. 
[n]	T. Katoh, A. Akiyama, K. Kudo, and S. Takeda, “Communication System for the TRISTAN Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 679-683. 
[n]	R. Huang et al., “Preliminary design on the accelerator of an infrared free electron laser oscillator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1961-1963. doi:10.18429/JACoW-IPAC2023-TUPL101
[n]	J. D. Fox and H. D. Schwarz, “Phase and Amplitude Detection System for the Stanford Linear Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2264-2267. 
[n]	H. Saugnac et al., “The MYRRHA Spoke Cryomodule Design”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP082, pp. 613-615. 
[n]	W. Corbett et al., “Status of Digital Orbit Feedback for SPEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP094L, pp. 1931-1936. 
[n]	E. Im, J. Kwon, M. Park, S. Lee, and Y. Ahn, “Development of Monitoring and Analysis System for Beam Operation in RAON”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO16, unpublished. 
[n]	D. M?ñder et al., “Status and Development of the MYRRHA Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 432-434. doi:10.18429/JACoW-IPAC2018-MOPML017
[n]	M.-S. Yeh, L.-H. Chang, F.-T. Chung, Y.-H. Lin, and Ch. Wang, “The Design, Fabrication and Performance Testing of the Analog I/Q RF Control System at NSRRC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA071, pp. 422-424. 
[n]	A. Noda, K. Chida, Y. Hattori, A. Mizobuchi, F. Soga, and M. Yoshizawa, “Slow Beam Extraction System of TARN II”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1263-1266. 
[n]	C. F. Chang, “Real-Time Motor Control System for Beamlines”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 41-43. doi:10.18429/JACoW-MEDSI2016-MOPE18
[n]	A. Salom, B. Bravo, J. Marcos, and F. Perez, “ALBA LLRF Upgrades to Improve Beam Availability”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1022-1024. doi:10.18429/JACoW-IPAC2015-MOPTY042
[n]	R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713. 
[n]	J. R. J. Bennett and R. J. Elsey, “Glass Jointed Alumina Vacuum Chambers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3336-3339. 
[n]	N. Akasaka, T. Kageyama, K. Kanazawa, K. Sato, Y. Suetsugu, and Y. Takeuchi, “Development of the Movable Mask System for KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A17, pp. 2301-2303. 
[n]	A. Drago et al., “100 Bunch DANE Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA008, pp. 366-368. 
[n]	M. V. Petrichenkov et al., “Separators for SLAC B-Factory”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH009, pp. 3236-3238. 
[n]	J. Tanabe, J. Staples, and R. Yourd, “Design of the ESCAR Injection Beam Line”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1605-1609. 
[n]	J. H. Wei et al., “The New Beam Current Transformer for IR-FEL Facility at NSRL ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 312-315. doi:10.18429/JACoW-IPAC2017-MOPAB083
[n]	S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827. 
[n]	J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264. 
[n]	H. Suk et al., “Dynamics of a Driver Beam Propagating in an Underdense Plasma with a Downward Density Transition”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH145, pp. 4011-4013. 
[n]	P. A. McIntosh et al., “Assembly Preparations for the International ERL Cryomodule at Daresbury Laboratory”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO098, pp. 864-868. 
[n]	A. Noda, K. Chida, A. Mizobuchi, F. Soga, and M. Yoshizawa, “DC Septum Magnet for Beam Extraction”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 363-366. 
[n]	K. Hosono, M. Kibayashi, I. Miura, and J. Abe, “Magnetic System of the RCNP Ring-Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-04, pp. 474-477. 
[n]	R. Cassel, “A Low Ripple Pulsed Phased Back Power Supply”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 500-503. 
[n]	M. Ben Abdillah, P. Ausset, and R. Ferdinand, “Results of SPIRAL2 Beam Position Monitors on the Test Bench of the RFQ”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 261-264. doi:10.18429/JACoW-IBIC2018-TUPB03
[n]	P. Mueller et al., “RF Simulations of the Injector Section from CH8 to CH15 for MYRRHA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2790-2792. doi:10.18429/JACoW-IPAC2018-WEPML043
[n]	E. Medvedko et al., “High Resolution Analog / Digital Power Supply Controller”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE012, pp. 761-763. 
[n]	J. M. Nogiec and K. Trombly-Freytag, “Applying Service-Oriented Architecture to Archiving Data in Control and Monitoring Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 461-464. doi:10.18429/JACoW-ICALEPCS2017-TUPHA036
[n]	F. Perez, B. Bravo, A. Salom, and P. Sanchez, “Commissioning of the ALBA Storage Ring RF System”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC045, pp. 178-180. 
[n]	P. A. Corlett and J. H. P. Rogers, “ERLP Quantum Efficiency Scanner”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH165, pp. 3179-3181. 
[n]	M. Takao et al., “Progress toward Brightness Improvements at the SPring-8 Storage Ring”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOA202, pp. XX-XX. 
[n]	K. Ohmi et al., “Electron Cloud Instability in SuperKEKB Phase I Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3104-3106. doi:10.18429/JACoW-IPAC2017-WEPIK075
[n]	T. Toyama et al., “Beam Position Monitor for the J-PARC Main Ring Synchrotron”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW013, pp. XX-XX. 
[n]	Q. Z. Xing et al., “Present Status of the 3 MeV Proton Linac at Tsinghua University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP137, pp. 1182-1184. 
[n]	M. Thuot et al., “A Transient Tolerant Automated Control System for the LEDA 75kV Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL5, pp. 349-351. 
[n]	D. Reynet et al., “Design of the ESS Spoke Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP089, pp. 357-360. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search