Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Fu et al., “Design of the CSNS DTL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP063, pp. 554-556.
[n] S. Fu et al., “Development of a 324 MHz Drift Tube Linac for CSNS”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP061, pp. 548-550.
[n] R. Baker et al., “ESRF Double Crystal Monochromator - Design and Working Modes”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOOB01, pp. XX-XX.
[n] D. G. Kim, J.-W. Kim, H.-C. Bhang, and J. Y. Kim, “Development of a Bunch Length Detector”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP090, pp. 617-619.
[n] D. Douglas, E. Forest, and R. V. Servranckx, “A Method to Render Second-Order Beam Optics Programs Symplectic”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2279-2282.
[n] M. Hosaka et al., “Beam Diagnostics of Central Japan Synchrotron Radiation Research Facility Accelerator Complex”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB60, pp. 486-488.
[n] V. Roger et al., “Design of the 650 MHz High Beta Prototype Cryomodule for PIP-II at Fermilab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 671. doi:10.18429/JACoW-SRF2021-WEPTEV015
[n] T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
[n] G. Isoyama, S. Kashiwagi, R. Kato, M. Morio, and S. Suemine, “Development of RF Cavities for the SHB System of the L-band Electron Linac at Osaka University”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP057, pp. 918-920.
[n] T. N. Khabiboulline et al., “High Power Test of Room Temperature Spoke Cavities for HINS at Fermilab”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP012, pp. 79-81.
[n] R. J. Roussel et al., “Probing Multiperiod Plasma Response Regimes using Single Shot Wakefield Measurements”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 878-881. doi:10.18429/JACoW-NAPAC2019-WEPLO19
[n] A. Feschenko et al., “Development and Implementation of ?T Procedure for the SNS Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE049, pp. 3064-3066.
[n] K. Fujita, “Electromagnetic modeling of cryogenic vacuum chambers using a hybrid neural network-boundary integral equation approach”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2133-2136. doi:10.18429/JACoW-IPAC2025-WEPM073
[n] A. Z. Chen, T. G. Anderson, and B. M. Hanna, “NEG Pumping Strip Inside Tevatron B2 Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE051, pp. 3144-3146.
[n] T. Shin, S. Choi, E. H. Kim, J. Y. Kim, D. D. Kim, and C. C. Yun, “Design and installation of the RAON in-flight fragment separator”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper WEP15, unpublished.
[n] S. Schaller, “Man-Machine Interface Workshop Summary”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 595-596. doi:10.18429/JACoW-ICALEPCS1991-S20PD01
[n] A. Bosotti et al., “The Revised ELFA Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1524-1527.
[n] H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “Development of a High-Pressure Chemical Etching Method as a Surface Treatment for High-Field Accelerating Structures Made of Copper”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP052, pp. 903-905.
[n] L. Bellan et al., “Acceleration of the High Current Deuteron Beam Through the IFMIF-EVEDA RFQ: Confirmation of the Design Beam Dynamics Performances”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 197-202. doi:10.18429/JACoW-HB2021-WEDC2
[n] P. Kolb et al., “A Coupled RFQ-Drift Tube Combination for FRANZ”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP001, pp. 46-48.
[n] G. Isoyama, S. Kashiwagi, R. Kato, S. Suemine, N. Sugimoto, and A. Tokuchi, “Development of a Thermionic Electron Gun of the L-band Linac for FEL Operation”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP097, pp. 965-967.
[n] U. Mavri, M. Hoffmann, F. Ludwig, H. Schlarb, and L. Springer, “Automatic Loop for Carrier Suppression in Attosecond RF Receivers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3847-3849. doi:10.18429/JACoW-IPAC2019-THPRB021
[n] M. Baylac, J. D'Hondt, J. Knobloch, C. Pira, and A. Stocchi, “Innovation for sustainable accelerator systems (the European iSAS Project)”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 107-111. doi:10.18429/JACoW-HIAT2025-TUZ01
[n] T. Lamb et al., “Laser-to-RF Synchronization with Femtosecond Precision”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 407-410. doi:10.18429/JACoW-FEL2017-WEB04
For LaTeX
Use Complete Form
For BibTeX
References
- S. Fu et al., “Design of the CSNS DTL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP063, pp. 554-556.
- S. Fu et al., “Development of a 324 MHz Drift Tube Linac for CSNS”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP061, pp. 548-550.
- R. Baker et al., “ESRF Double Crystal Monochromator - Design and Working Modes”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOOB01, pp. XX-XX.
- D. G. Kim, J.-W. Kim, H.-C. Bhang, and J. Y. Kim, “Development of a Bunch Length Detector”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP090, pp. 617-619.
- D. Douglas, E. Forest, and R. V. Servranckx, “A Method to Render Second-Order Beam Optics Programs Symplectic”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2279-2282.
- M. Hosaka et al., “Beam Diagnostics of Central Japan Synchrotron Radiation Research Facility Accelerator Complex”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB60, pp. 486-488.
- V. Roger et al., “Design of the 650 MHz High Beta Prototype Cryomodule for PIP-II at Fermilab”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 671.
- T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
- G. Isoyama, S. Kashiwagi, R. Kato, M. Morio, and S. Suemine, “Development of RF Cavities for the SHB System of the L-band Electron Linac at Osaka University”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP057, pp. 918-920.
- T. N. Khabiboulline et al., “High Power Test of Room Temperature Spoke Cavities for HINS at Fermilab”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP012, pp. 79-81.
- R. J. Roussel et al., “Probing Multiperiod Plasma Response Regimes using Single Shot Wakefield Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 878-881.
- A. Feschenko et al., “Development and Implementation of ?T Procedure for the SNS Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE049, pp. 3064-3066.
- K. Fujita, “Electromagnetic modeling of cryogenic vacuum chambers using a hybrid neural network-boundary integral equation approach”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM073, pp. 2133-2136.
- A. Z. Chen, T. G. Anderson, and B. M. Hanna, “NEG Pumping Strip Inside Tevatron B2 Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE051, pp. 3144-3146.
- T. Shin, S. Choi, E. H. Kim, J. Y. Kim, D. D. Kim, and C. C. Yun, “Design and installation of the RAON in-flight fragment separator”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper WEP15, unpublished.
- S. Schaller, “Man-Machine Interface Workshop Summary”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S20PD01, pp. 595-596.
- A. Bosotti et al., “The Revised ELFA Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1524-1527.
- H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “Development of a High-Pressure Chemical Etching Method as a Surface Treatment for High-Field Accelerating Structures Made of Copper”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP052, pp. 903-905.
- L. Bellan et al., “Acceleration of the High Current Deuteron Beam Through the IFMIF-EVEDA RFQ: Confirmation of the Design Beam Dynamics Performances”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper WEDC2, pp. 197-202.
- P. Kolb et al., “A Coupled RFQ-Drift Tube Combination for FRANZ”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP001, pp. 46-48.
- G. Isoyama, S. Kashiwagi, R. Kato, S. Suemine, N. Sugimoto, and A. Tokuchi, “Development of a Thermionic Electron Gun of the L-band Linac for FEL Operation”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP097, pp. 965-967.
- U. Mavri, M. Hoffmann, F. Ludwig, H. Schlarb, and L. Springer, “Automatic Loop for Carrier Suppression in Attosecond RF Receivers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3847-3849.
- M. Baylac, J. D'Hondt, J. Knobloch, C. Pira, and A. Stocchi, “Innovation for sustainable accelerator systems (the European iSAS Project)”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper TUZ01, pp. 107-111.
- T. Lamb et al., “Laser-to-RF Synchronization with Femtosecond Precision”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 407-410.
Back to search