Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Bosotti et al., “RF Tests of the Beta=0.5 Five Cell TRASCO Cavities”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF026, pp. 1024-1026.
[n] J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA005, unpublished.
[n] T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 253-255. doi:10.18429/JACoW-NAPAC2022-MOPA87
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1181-1184.
[n] I. Owada et al., “Precise Identification of Extracted Ion Beam Spectrum Initially Obtained in Synthesising Iron-Endohedral Fullerenes on ECRIS”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 114-117. doi:10.18429/JACoW-ECRIS2020-WEWZO02
[n] Y.-H. Liu, J.-C. Chang, J.-R. Chen, Y. Lin, and Z.-D. Tsai, “The Improvement and Data Acquisition Systems on Electrical Systems and Grounding Networks in NSRRC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE072, pp. 3868-3870.
[n] D. D. Bhawalkar, “RECENT AND FUTURE ACCELERATOR ACTIVITIES IN INDIA”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOA04, pp. XX-XX.
[n] M. Kaemingk, E. Simakov, J. Rosenzweig, and P. M. Anisimov, “Calculations of emittance measurements via inverse Compton scattering”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 978-981. doi:10.18429/JACoW-NAPAC2025-THP017
[n] D. Gamba, A. Rossi, G. Russo, and P. Kruyt, “Specifications for a new electron cooler of the antiproton decelerator at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2241-2244. doi:10.18429/JACoW-IPAC2023-TUPM027
[n] J.-C. Chang and Y.-H. Liu, “Finite Element Analysis on Beam-Induced Heat Load in in-Vacuum Undulators with a Small Magnet Gap”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3760-3762. doi:10.18429/JACoW-IPAC2018-THPAL052
[n] S. Schreiber et al., “Experience with the Photoinjector Laser at FLASH”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH017, pp. 590-593.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Prototype Accelerator with Harmonics of a Ti:Sa Laser Produced in Gas.”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH046, pp. 138-141.
[n] T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1396-1399. doi:10.18429/JACoW-IPAC2023-TUPA028
[n] M. Roth et al., “Laser-acceleration and Laser-cooling for Ion Beams”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYACH01, pp. 54-58.
[n] D. Gamba, P. Kruyt, G. Franchetti, and J. Romain, “Electron and Laser Cooling of Stored Ion Beams at CERN: XSuite Simulations and Measurements”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 42-47. doi:10.18429/JACoW-COOL2025-TUD2
[n] X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 16-19. doi:10.18429/JACoW-HIAT2025-MOB03
[n] Y.-M. Abiven et al., “Robotizing SOLEIL Beamlines to Improve Experiments Automation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 182. doi:10.18429/JACoW-ICALEPCS2019-MOPHA001
[n] J. W. Lewellen et al., “Status of the SLAC/MSU SRF Gun Development Project”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 623-626. doi:10.18429/JACoW-NAPAC2022-WEPA03
[n] P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 836-839. doi:10.18429/JACoW-IPAC2024-MOPS51
[n] P. Schnizer, G. Rehm, and W. Sulaiman Khail, “Use cases for consistent robust processing of data models”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD048, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Bosotti et al., “RF Tests of the Beta=0.5 Five Cell TRASCO Cavities”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF026, pp. 1024-1026.
- J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA005, unpublished.
- T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 253-255.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “Interleaved Wide and Narrow Pulses for the KAON Factory 1 MHz Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1181-1184.
- I. Owada et al., “Precise Identification of Extracted Ion Beam Spectrum Initially Obtained in Synthesising Iron-Endohedral Fullerenes on ECRIS”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper WEWZO02, pp. 114-117.
- Y.-H. Liu, J.-C. Chang, J.-R. Chen, Y. Lin, and Z.-D. Tsai, “The Improvement and Data Acquisition Systems on Electrical Systems and Grounding Networks in NSRRC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE072, pp. 3868-3870.
- D. D. Bhawalkar, “RECENT AND FUTURE ACCELERATOR ACTIVITIES IN INDIA”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper MOA04, pp. XX-XX.
- M. Kaemingk, E. Simakov, J. Rosenzweig, and P. M. Anisimov, “Calculations of emittance measurements via inverse Compton scattering”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 978-981.
- D. Gamba, A. Rossi, G. Russo, and P. Kruyt, “Specifications for a new electron cooler of the antiproton decelerator at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM027, pp. 2241-2244.
- J.-C. Chang and Y.-H. Liu, “Finite Element Analysis on Beam-Induced Heat Load in in-Vacuum Undulators with a Small Magnet Gap”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3760-3762.
- S. Schreiber et al., “Experience with the Photoinjector Laser at FLASH”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH017, pp. 590-593.
- G. Lambert et al., “Seeding the FEL of the SCSS Prototype Accelerator with Harmonics of a Ti:Sa Laser Produced in Gas.”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH046, pp. 138-141.
- T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA028, pp. 1396-1399.
- M. Roth et al., “Laser-acceleration and Laser-cooling for Ion Beams”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYACH01, pp. 54-58.
- D. Gamba, P. Kruyt, G. Franchetti, and J. Romain, “Electron and Laser Cooling of Stored Ion Beams at CERN: XSuite Simulations and Measurements”, in Proc. 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper TUD2, pp. 42-47.
- X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOB03, pp. 16-19.
- Y.-M. Abiven et al., “Robotizing SOLEIL Beamlines to Improve Experiments Automation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 182.
- J. W. Lewellen et al., “Status of the SLAC/MSU SRF Gun Development Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 623-626.
- P. Kruyt, D. Gamba, and G. Franchetti, “Measurements and simulations of the e-cooling performance in ELENA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS51, pp. 836-839.
- P. Schnizer, G. Rehm, and W. Sulaiman Khail, “Use cases for consistent robust processing of data models”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD048, unpublished.
Back to search
