Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] J. Corlett, L. Doolittle, R. Schoenlein, J. Staples, R. Wilcox, and A. Zholents, “Techniques for Synchronization of X-Ray Pulses to the Pump Laser in an Ultrafast X-Ray Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB001, pp. 2408-2410.
[n] A. V. Bogomyagkov, S. A. Glukhov, E. B. Levichev, and S. V. Sinyatkin, “Dynamic Aperture Limitation Due to the Synchrotron Radiation from Quadrupole Magnets in very High Energy Colliders”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 46. doi:10.18429/JACoW-eeFACT2018-TUOAB01
[n] P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
[n] E. Prat et al., “Slice Emittance Optimization at the SwissFEL Injector Test Facility”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUOCNO06, pp. 200-204.
[n] J. Ma, X. Wang, V. Litvinenko, V. Samulyak, G. Wang, and K. Yu, “Modulator Simulations for Coherent Electron Cooling”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 816-819. doi:10.18429/JACoW-NAPAC2016-WEPOA55
[n] W. Anders, J. M. Byrd, M. Georgsson, and D. Kr?ñmer, “First Experimental Results on Landau Cavities in BESSY II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B15, pp. 1963-1965.
[n] M. Bieler, I. V. Agapov, Y.-C. Chae, J. Keil, G. K. Sahoo, and R. Wanzenberg, “Petra III Operation and Studies 2018”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1419-1421. doi:10.18429/JACoW-IPAC2019-TUPGW015
[n] J. C. Collins, M. Ball, B. Broderick, J. Katuin, Wm. Manwaring, and N. Schrueder, “Design of the MPRI Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP016, pp. XX-XX.
[n] P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
[n] A. T. Annaluru et al., “1 + / N + Method: Numerical Simulation Studies and Experimental Measurements on the SPIRAL1 Charge Breeder”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 34-38. doi:10.18429/JACoW-ECRIS2018-MOC5
[n] Y. Chu et al., “Data Acquisition and Database Management System for Samsung Superconductor Test Facility”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP018, pp. XX-XX.
[n] W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
[n] K. Koba, J. Dey, I. Kourbanis, and J. Reid, “Beam Loading Compensation Requirements for Multibatch Coalescing in Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH048, pp. 879-881.
[n] K. E. Nichols et al., “Experimental Results of Dense Array Diamond Field Emitters in RF Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2134-2136. doi:10.18429/JACoW-IPAC2019-TUPTS090
[n] G. A. Kirby et al., “Progress in the Development of the 1-m Model of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP103G, pp. 2299-2301.
[n] A. C. C. Villari, D. B. Crisp, A. Lapierre, S. Nash, T. Summers, and Q. Zhao, “Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2760-2762. doi:10.18429/JACoW-IPAC2019-WEPGW112
[n] M. W. Guetg, P. Emma, M. Santana-Leitner, J. J. Welch, and F. Zhou, “Collimation System Design for LCLS-II”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3755-3758. doi:10.18429/JACoW-IPAC2016-THPMY043
[n] T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
[n] R. W. Roth et al., “Test Results on 3 GHz Structures for a Superconducting Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2417-2420.
[n] I. Yamane et al., “PRIME - A Synchrotrom of a Phased Program for the Japan Hadron Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 488-491.
[n] M. Crescenti, P. Knaus, and S. Rossi, “The RF Cycle of the Pimms Medical Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A02, pp. 2503-2505.
[n] S. Shin, J.-S. Chai, J. C. Lee, and B. N. Lee, “Design Study of a 83.2 MHz RF Cavity for the 9 MeV Compact Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT029, pp. 215-217.
[n] M. Korostelev and F. Zimmermann, “Nonlinear Optimization of a Low Emittance CLIC Damping Ring Lattice”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG023, pp. 2315-2317.
[n] B. A. Aminov, A. Borisov, S. K. Kolesov, M. Pekeler, C. Piel, and H. Piel, “Development of Low Level RF Control Systems for Superconducting Heavy Ion Linear Accelerators, Electron Synchrotrons and Storage Rings”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper WPAT068, unpublished.
[n] K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- J. Corlett, L. Doolittle, R. Schoenlein, J. Staples, R. Wilcox, and A. Zholents, “Techniques for Synchronization of X-Ray Pulses to the Pump Laser in an Ultrafast X-Ray Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB001, pp. 2408-2410.
- A. V. Bogomyagkov, S. A. Glukhov, E. B. Levichev, and S. V. Sinyatkin, “Dynamic Aperture Limitation Due to the Synchrotron Radiation from Quadrupole Magnets in very High Energy Colliders”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 46.
- P. McIntosh et al., “An Over-Damped Cavity Longitudinal Kicker for the PEP-II LER”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB060, pp. 3141-3143.
- E. Prat et al., “Slice Emittance Optimization at the SwissFEL Injector Test Facility”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUOCNO06, pp. 200-204.
- J. Ma, X. Wang, V. Litvinenko, V. Samulyak, G. Wang, and K. Yu, “Modulator Simulations for Coherent Electron Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 816-819.
- W. Anders, J. M. Byrd, M. Georgsson, and D. Kr?ñmer, “First Experimental Results on Landau Cavities in BESSY II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B15, pp. 1963-1965.
- M. Bieler, I. V. Agapov, Y.-C. Chae, J. Keil, G. K. Sahoo, and R. Wanzenberg, “Petra III Operation and Studies 2018”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1419-1421.
- J. C. Collins, M. Ball, B. Broderick, J. Katuin, Wm. Manwaring, and N. Schrueder, “Design of the MPRI Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP016, pp. XX-XX.
- P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
- A. T. Annaluru et al., “1 + / N + Method: Numerical Simulation Studies and Experimental Measurements on the SPIRAL1 Charge Breeder”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 34-38.
- Y. Chu et al., “Data Acquisition and Database Management System for Samsung Superconductor Test Facility”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP018, pp. XX-XX.
- W. B. Herrmannsfeldt, R. R. Cochran, and R. H. Helm, “Electromagnetic and Mechanical Properties of Niobium Cavities for a Superconducting Electron Linear Accelerator”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper D-4, pp. 265-277.
- K. Koba, J. Dey, I. Kourbanis, and J. Reid, “Beam Loading Compensation Requirements for Multibatch Coalescing in Fermilab Main Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH048, pp. 879-881.
- K. E. Nichols et al., “Experimental Results of Dense Array Diamond Field Emitters in RF Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2134-2136.
- G. A. Kirby et al., “Progress in the Development of the 1-m Model of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP103G, pp. 2299-2301.
- A. C. C. Villari, D. B. Crisp, A. Lapierre, S. Nash, T. Summers, and Q. Zhao, “Energy Calibration of the Rea3 Accelerator by Time-of-Flight Technique”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2760-2762.
- M. W. Guetg, P. Emma, M. Santana-Leitner, J. J. Welch, and F. Zhou, “Collimation System Design for LCLS-II”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3755-3758.
- T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358.
- R. W. Roth et al., “Test Results on 3 GHz Structures for a Superconducting Linear Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2417-2420.
- I. Yamane et al., “PRIME - A Synchrotrom of a Phased Program for the Japan Hadron Project”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 488-491.
- M. Crescenti, P. Knaus, and S. Rossi, “The RF Cycle of the Pimms Medical Synchrotron”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A02, pp. 2503-2505.
- S. Shin, J.-S. Chai, J. C. Lee, and B. N. Lee, “Design Study of a 83.2 MHz RF Cavity for the 9 MeV Compact Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT029, pp. 215-217.
- M. Korostelev and F. Zimmermann, “Nonlinear Optimization of a Low Emittance CLIC Damping Ring Lattice”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG023, pp. 2315-2317.
- B. A. Aminov, A. Borisov, S. K. Kolesov, M. Pekeler, C. Piel, and H. Piel, “Development of Low Level RF Control Systems for Superconducting Heavy Ion Linear Accelerators, Electron Synchrotrons and Storage Rings”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT068, unpublished.
- K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282.
Back to search