Favourites
For Word
[n] M. A. Leitner et al., “H$^-$ Ion Source Development for the National Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W026, pp. 2758-2760.
[n] Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1852-1855.
[n] S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328.
[n] M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
[n] S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-IBIC2017-TUPCC12
[n] J. Buon, J. Jeanjean, F. Le Diberdier, V. Lepeltier, and P. Puzo, “Results of the Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP059L, pp. 1683-1685.
[n] K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
[n] N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n] W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2769-2772.
[n] E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218.
[n] J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580.
[n] T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
[n] D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
[n] M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1394-1396. doi:10.18429/JACoW-IPAC2015-TUPWA002
[n] Y. Xiao, C. Feng, H. Sun, and B. Liu, “Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1920-1923. doi:10.18429/JACoW-IPAC2023-TUPL078
[n] J. L. Muñoz et al., “Multiharmonic Buncher for the Isolde Superconducting Recoil Separator Project”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 321-325. doi:10.18429/JACoW-HB2023-WEC4C2
[n] D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
[n] F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937.
[n] R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Leitner et al., “H$^-$ Ion Source Development for the National Spallation Neutron Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W026, pp. 2758-2760.
- Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1852-1855.
- S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328.
- M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376.
- S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 176-178.
- J. Buon, J. Jeanjean, F. Le Diberdier, V. Lepeltier, and P. Puzo, “Results of the Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP059L, pp. 1683-1685.
- K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670.
- N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2239-2242.
- W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2769-2772.
- E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1215-1218.
- J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 576-580.
- T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526.
- D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073.
- M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1394-1396.
- Y. Xiao, C. Feng, H. Sun, and B. Liu, “Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL078, pp. 1920-1923.
- J. L. Muñoz et al., “Multiharmonic Buncher for the Isolde Superconducting Recoil Separator Project”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC4C2, pp. 321-325.
- D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136.
- F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937.
- R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225.
Back to search