JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866. 
[n]	K. Czuba et al., “Performance of Analog Signal Distribution in the ATCA Based LLRF System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP293, pp. 666-668. 
[n]	A. A. Chesworth et al., “DIAMOND: A UK National Light Source Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP72, pp. 2433-2435. 
[n]	J. L. Conradie et al., “New Developments and a Review of the Accelerator Facilities at iThemba LABS”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEXOR02, pp. 98-102. 
[n]	M. Wenskat, C. Bate, R. Ghanbari, W. Hillert, and C. Martens, “A New Ultra-High Vacuum Furnace for SRF R&D”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 855-858. doi:10.18429/JACoW-SRF2023-WEPWB111
[n]	M. Othman, A. Gabriel, P. Kramer, E. Nanni, and X. Shen, “Terahertz Time Stamping Tool Development for SLAC MeV-UED”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA057, unpublished. 
[n]	D. Arranger et al., “The MIRI Imager Ground Support Equipment Control System Based on PCs”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB06, pp. 172-174. 
[n]	A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518. 
[n]	A. Carroll et al., “Large Acceptance Magnetic Focusing Horns for Production of a High Intensity Narrow Band Neutrino Beam at the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3054-3057. 
[n]	S. Heifets, “Broadband Impedance of the B Factory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3459-3462. 
[n]	D. Marx et al., “Lattice design of the EIC electron storage ring for energies down to 5 GeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 104-107. doi:10.18429/JACoW-IPAC2023-MOPA037
[n]	H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594. 
[n]	T. L. Houck, G. J. Caporaso, C. C. Shang, S. E. Sampayan, N. E. Molau, and M. L. Krogh, “Measured and Theoretical Characterization of the RF Properties of Stacked, High-Gradient Insulator Material”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P107, pp. 2627-2629. 
[n]	I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 517. doi:10.18429/JACoW-ICALEPCS2019-MOPHA124
[n]	T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1302-1304. doi:10.18429/JACoW-IPAC2024-TUPG35
[n]	I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593. 
[n]	T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988. 
[n]	Y. Luo et al., “Dynamic aperture evaluation for the EIC Hadron storage ring with two interaction regions”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 93-96. doi:10.18429/JACoW-IPAC2023-MOPA031
[n]	L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964. 
[n]	A. Fisher, J. Pearlman, N. Rostoker, and K. Whitham, “Laser Extraction of an Electron Beam from a Modified Elongated Beatron Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3048-3051. 
[n]	A. M. M. Todd, C. C. Paulson, and S. L. Mendelsohn, “The Neutral Particle Beam Space Experiment (NPBSE) Accelerator Designs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1774-1777. 
[n]	U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 25-29. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO01
[n]	J. M. Patel et al., “Upgrade of the Canadian Light Source Booster RF System to Solid State”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4112-4114. doi:10.18429/JACoW-IPAC2019-THPTS006
[n]	C. Boehme, I. Bekman, V. Kamerdzhiev, B. Lorentz, M. Simon, and C. Weidemann, “COSY Orbit Control Upgrade”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 263-266. doi:10.18429/JACoW-IBIC2017-TUPCF20
[n]	A. Drees et al., “Conceptual design of the Electron-Ion Collider (EIC) Electron Storage Ring (ESR) beam abort systems”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 401-404. doi:10.18429/JACoW-NAPAC2025-TUP023
[n]	N. Baboi et al., “Impedance Measurement Setup for Higher-Order Modes Studies in NLC Accelerating Structures with The Wire Method”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH463, pp. 743-745. 
[n]	C. Hocini et al., “Proof of concept of a PLC based emittance meter for the NEWGAIN project”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 489-494. doi:10.18429/JACoW-ICALEPCS2025-TUMR019
[n]	J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1590-1595. doi:10.18429/JACoW-ICALEPCS2025-THPD013
[n]	J. Brodowski, J. T. Keane, A. W. Maschke, E. Meier, and R. M. Mobley, “500 kV Mercury Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3039-3042. 
[n]	N. Greve, M. Brendike, D. K. Kraft, M. Neu, and G. Pfeiffer, “Status on Continuous Scans at BESSY II”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 513-517. doi:10.18429/JACoW-ICALEPCS2023-TUPDP013
[n]	G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 31-36. doi:10.18429/JACoW-NAPAC2019-MOYBB2
[n]	H. N. Jungwirth et al., “Progress with New Beams and Facilities at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-09, pp. 625-628. 
[n]	S. Wilkes, A. Morgan, M. Warren, G. Karras, and I. Martin, “Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1071-1074. doi:10.18429/JACoW-IPAC2023-MOPM037
[n]	A. Gotz et al., “State of the Tango Controls Kernel Development in 2019”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1235. doi:10.18429/JACoW-ICALEPCS2019-WEPHA058
[n]	R. Cirami et al., “FORS-Up: An Upgrade of the FORS2 Instrument @ ESO VLT”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 252. doi:10.18429/JACoW-ICALEPCS2019-MOPHA029
[n]	J.-B. de Martel, R. Gorbonosov, and N. Madysa, “Machine Learning Platform: Deploying and Managing Models in the CERN Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 50-55. doi:10.18429/JACoW-ICALEPCS2021-MOBL03
[n]	T. Tanabe, T. Rizawa, K. Ohtomo, and T. Katayama, “Development of MUSES-ACR Electron Cooler”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP103, pp. 1722-1724. 
[n]	F. Eozenou et al., “Single Cell Electro-Polishing at CEA Saclay: First Results”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP80, pp. XX-XX. 
[n]	D. Lampridis, T. Gingold, F. Vaga, T. Wlostowski, A. Wujek, and M. Malczak, “The Distributed Oscilloscope: A Large-Scale Fully Synchronised Data Acquisition System Over White Rabbit”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 726. doi:10.18429/JACoW-ICALEPCS2019-TUBPR01
[n]	S. P. Kearney et al., “Design of Apparatus for a High-Power-Density Diamond Irradiation Endurance Experiment for XFELO Applications”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 185-187. doi:10.18429/JACoW-FEL2017-MOP056
[n]	R. Valdiviez, D. Schrage, H. Haagenstad, and J. Szalczinger, “The Thermal Expansion of  Some Common Linac Materials”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH474, pp. 767-769. 
[n]	A. D. Parsons et al., “P99: An Optical Beamline for Offline Technique Development and Systems Integration for Prototype Beamline Instrumentation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 899. doi:10.18429/JACoW-ICALEPCS2019-WEBPP04
[n]	Y. Zong et al., “Statistical analysis of field emission for SHINE project”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP26, unpublished. 
[n]	M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58. 
[n]	N. Voumard et al., “Trigger synchronization unit consolidation for SPS and LHC dumping kickers systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 447-452. doi:10.18429/JACoW-ICALEPCS2025-TUMR008
[n]	D. A. Gray, “Initial Operation of the SNS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2638-2643. 
[n]	S. Schneider, A. H. Botha, J. C. Cornell, and P. G. Molteno, “The Beam Diagnostic System for the Transfer Beamline at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J20, pp. 407-410. 
[n]	O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731. 
[n]	A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913. 
[n]	L. R. Dalesio, A. J. Kozubal, and M. R. Kraimer, “EPICS Architecture”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 278-282. doi:10.18429/JACoW-ICALEPCS1991-S07IC03
[n]	H. N. Jungwirth, L. D. Bruins, A. H. Botha, and J. L. Pabot, “Design of Magnets for an Open-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-14, pp. 193-196. 
[n]	J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463. 
[n]	M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872. 
[n]	K. E. Deitrick et al., “A Hard X-Ray Compton Source at CBETA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3765-3768. doi:10.18429/JACoW-IPAC2021-THPAB009
[n]	P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714. 
[n]	R. Tikhoplav, A. Y. Murokh, and I. Jovanovic, “Progress Report on Development of Novel Ultrafast Mid-IR Laser System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP040, pp. 2810-2812. 
[n]	S. E. Sampayan et al., “High-Performance Insulator Structures for Accelerator Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P093, pp. 1308-1310. 
[n]	J. Hogan et al., “Design of SNS Cavity Support Structure”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH159, pp. 1158-1159. 
[n]	J. F. O, J. F. Power, J. Ledford, J. D. Gilpatrick, M. Stettler, and J. Sage, “Design and Development of the LEDA Slow Wire Scanner Profile Measurement”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4059, pp. 186-188. 
[n]	N. Us Saqib, A. Jurado, C. Toy, D. A. Nawaz, and E. Andrade, “Design and commissioning of the upgraded ALS SR RF cavity water control system”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 587-590. doi:10.18429/JACoW-ICALEPCS2025-TUPD030
[n]	G. P. Lawrence, “High-power Proton Linac for Transmuting the Long-lived Fission Products in Nuclear Waste”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2598-2601. 
[n]	E. L. Garwin, “Applications of Vacuum Technology to Novel Accelerator Problems”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2758-2763. 
[n]	S. Adam, “New Proofs for Old Facts in Acceleration Theory”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-16, pp. 431-433. 
[n]	K. Yu, Q. S. Shu, J. Zbasnik, J. Maddocks, W. Clay, and G. Morales, “Thermal Model and Associated Novel Approach for Synchrotron Radiation Liner with End Cooling”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3891-3894. 
[n]	F. Hoguin, S. Deghaye, R. Gorbonosov, J. Lauener, and P. Mantion, “Distributed Transactions in CERNÔÇÖs Accelerator Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 468-472. doi:10.18429/JACoW-ICALEPCS2021-TUPV033
[n]	G. A. Bowers et al., “User Interface Framework for the National Ignition Facility (NIF)”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA26, pp. 146-148. 
[n]	N. Aftab et al., “Improvements in longitudinal phase space tomography at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4601-4604. doi:10.18429/JACoW-IPAC2023-THPL073
[n]	M. G. Minty, C. Adolphsen, L. J. Hendrickson, R. Sass, T. Slaton, and M. Woodley, “Feedback Performance at the Stanford Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB03, pp. 662-664. 
[n]	M. Pasquato and P. Sivera, “Software Integration and Test Techniques in a Large Distributed Project: Evolution, Process Improvement, Results”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper ROAB03, pp. 508-510. 
[n]	A. A. Abbadi and B. R. Aljamal, “SESAME Light Source Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA001, pp. XX-XX. 
[n]	A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX. 
[n]	P. K. Sigg, “SUMMARY OF THE 3RD WORKSHOP ON HIGH POWER RF-SYSTEMS FOR ACCELERATORS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C1, pp. XX-XX. 
[n]	X. Artru, R. Chehab, A. Jejcic, J. Maillard, and J. Silva, “Overall Simulation of a Positron Beam Generated by Photons from Channeled MultiGeV Electrons”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2101-2104. 
[n]	B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1402-1405. 
[n]	M. Bruchon, B. Visentin, and F. Eozenou, “Electropolishing on Single and MultiI-Cell: COMSOL Modelling”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP51, pp. XX-XX. 
[n]	R. J. Burke, “Telescoping Beams for Heavy Ion Fusion”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3092-3095. 
[n]	L. A. Sarkisyan and A. L. Sarkisyan, “Increase of Beam Intensity”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXA-10, pp. 409-410. 
[n]	A. Chabert, “What could be a Radioactive Ion Beam Facility at GANIL”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 412-415. 
[n]	J. Bergl et al., “Embedded Controllers, Field Bus and a Modular IO Concept: Central Elements of BESSY II Controls”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P022, pp. 2493-2495. 
[n]	N. Us Saqib, H. Huang, and M. Lopez, “Upgrading the ALS beamline equipment protection system: software development and implementation”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 594-597. doi:10.18429/JACoW-ICALEPCS2025-TUPD032
[n]	S. A. Kahn, R. J. Abrams, M. A. Cummings, R. P. Johnson, and G. M. Kazakevich, “Magnet System for a Compact Microtron Source”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 363-365. doi:10.18429/JACoW-NAPAC2022-TUPA11
[n]	K. Sonnad, K. Hammond, J. Sikora, and S. Veitzer, “Effects of Reflections on TE-Wave Measurements of Electron Cloud Density”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST06, pp. 103-107. 
[n]	A. Vostrikov, A. Grassellino, A. Romanenko, L. Horyn, Y. K. Kim, and T. Murat, “Modifications of Superconducting Properties of Niobium Caused by Nitrogen Doping of Ultra-High Quality Factor Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB027, pp. 144-148. 
[n]	L. Strobino, S. F. Er, N. Magnin, P. Van Trappen, and N. Voumard, “Novel distributed fast controls architecture for the consolidation of CERN's PS kickers”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 460-465. doi:10.18429/JACoW-ICALEPCS2025-TUMR012
[n]	S. A. Belomestnykh et al., “Commissioning and Operations Results of the Industry-Produced CESR-Type SRF Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT089, pp. 4233-4235. 
[n]	T. Enegren, D. A. Dohan, K. Fong, V. Pacak, and R. Worsham, “Third Harmonic Flattopping in the TRIUMF RF Cavity”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-06, pp. 349-352. 
[n]	W. Meng, W. B. Sampson, and M. Suenaga, “Magnetic Flux Shielding for the Muon g-2 Storage Ring Superconducting Inflector”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2904-2907. 
[n]	P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199. 
[n]	E. van der Kraaij et al., “MRI-Guided-PT: Integrating an MRI in a Proton Therapy System”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 144-147. doi:10.18429/JACoW-CYCLOTRONS2019-TUB03
[n]	K. Yu, Q. S. Shu, K. K. Leung, and J. Zbasnik, “Effective Stress of the SSC 80 K Synchrotron Radiation Liner in a Quenching Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2787-2790. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search