Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4798-4801. doi:10.18429/JACoW-IPAC2023-THPL141
[n] R. M. Jones, N. Baboi, and N. M. Kroll, “Multi-Band Dipole and Multiploe Wakefields in NLC Traveling Wave Accelerators using a Wire Measurement Technique”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI118, pp. 1514-1516.
[n] T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
[n] P. Gomes et al., “The Control System for the Cryogenics in the LHC Tunnel [ First Experience and Improvements ]”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP061, pp. 519-521.
[n] H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4662-4664. doi:10.18429/JACoW-IPAC2018-THPML007
[n] Y. Jongen, C. Pirart, and G. H. Ryckewaert, “The ECREVIS Source: A Status Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-03, pp. 281-283.
[n] H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. XX-XX. doi:10.18429/JACoW-MEDSI2018-TUOPMA03
[n] J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
[n] L. Wroe et al., “Accelerator design choices for a compact, electron-driven, pulsed neutron source”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 21-24. doi:10.18429/JACoW-LINAC2024-MOAA004
[n] R. Keller, “Survey and Alignment Data Analysis for the ALS Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2910-2913.
[n] L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the IPAC'23, Venice, Italy, May 2023, paper THODA3, unpublished.
[n] J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2092-2095.
[n] N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2509-2512.
[n] J. F. DeFord, E. M. Nelson, and J. J. Petillo, “Finite-Element 2D 3D PIC Modeling of RF Devices with Applications to Multipacting”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper WPAT077, unpublished.
[n] J. C. Collins and Wm. Manwaring, “Use of Microcomputers in the IUCF Control System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-06, pp. 601-603.
[n] L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
[n] S. Carrozza et al., “A New Concept of High Current Power Supply for the Main Cyclotron Magnet at TRIUMF”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 186-189. doi:10.18429/JACoW-Cyclotrons2016-TUP10
[n] P. Juan, J. Darpentigny, P. C. Marin, and P. Nghiem, “Closed Orbit Measurement and Correction at Super-ACO”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 729-732.
[n] M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
[n] I. Rodriguez, J. Speed, and S. Lawrie, “Dimensional and thermal design of the electrostatic chopper for the new ISIS MEBT”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3524-3527. doi:10.18429/JACoW-IPAC2024-THPR17
[n] C. W. Schmidt, “The Fermilab 400-MeV Linac Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1655-1660.
[n] W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1151-1154.
[n] D. Briggs et al., “Computer Modelling of Bunch-by-Bunch Feedback for the SLAC B-Factory Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1407-1410.
[n] C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
[n] D. Vandeplassche, J. C. Am?®lia, W. Beeckman, Y. Jongen, G. Lannoye, and S. Zaremba, “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: On Beam Dynamics Issues”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-05, pp. 454-457.
[n] F. Wang et al., “Linear Optics Calibration at the MIT-Bates South Hall Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP65, pp. 3101-3103.
For LaTeX
Use Complete Form
For BibTeX
References
- P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL141, pp. 4798-4801.
- R. M. Jones, N. Baboi, and N. M. Kroll, “Multi-Band Dipole and Multiploe Wakefields in NLC Traveling Wave Accelerators using a Wire Measurement Technique”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI118, pp. 1514-1516.
- T. M. Huang et al., “The development of a high power input coupler for China ADS injector I RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO041, pp. 3857-3859.
- P. Gomes et al., “The Control System for the Cryogenics in the LHC Tunnel [ First Experience and Improvements ]”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP061, pp. 519-521.
- H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4662-4664.
- Y. Jongen, C. Pirart, and G. H. Ryckewaert, “The ECREVIS Source: A Status Report”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DP-03, pp. 281-283.
- H. Joehri et al., “Development of the new UE38 Undulator for the Athos Beamline in SwissFEL”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. XX-XX.
- J. Haimson and B. L. Mecklenburg, “A 17 GHz High Gradient Linac having Stainless Steel Surfaces in the High Intensity Magnetic and Electric Field Regions of the Structure”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS085, pp. 2532-2534.
- L. Wroe et al., “Accelerator design choices for a compact, electron-driven, pulsed neutron source”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 21-24.
- R. Keller, “Survey and Alignment Data Analysis for the ALS Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2910-2913.
- L. Reid et al., “Acceleration of electrons from a linear accelerator by a laser driven plasma wave at CLARA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THODA3, unpublished.
- J. A. Martin et al., “Superconducting Conversion of the Oak Ridge Isochronous Cyclotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2092-2095.
- N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2509-2512.
- J. F. DeFord, E. M. Nelson, and J. J. Petillo, “Finite-Element 2D 3D PIC Modeling of RF Devices with Applications to Multipacting”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT077, unpublished.
- J. C. Collins and Wm. Manwaring, “Use of Microcomputers in the IUCF Control System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-06, pp. 601-603.
- L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975.
- S. Carrozza et al., “A New Concept of High Current Power Supply for the Main Cyclotron Magnet at TRIUMF”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 186-189.
- P. Juan, J. Darpentigny, P. C. Marin, and P. Nghiem, “Closed Orbit Measurement and Correction at Super-ACO”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 729-732.
- M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
- I. Rodriguez, J. Speed, and S. Lawrie, “Dimensional and thermal design of the electrostatic chopper for the new ISIS MEBT”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR17, pp. 3524-3527.
- C. W. Schmidt, “The Fermilab 400-MeV Linac Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1655-1660.
- W. Lavender et al., “The SSRL Injector Beam Position Monitoring Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1151-1154.
- D. Briggs et al., “Computer Modelling of Bunch-by-Bunch Feedback for the SLAC B-Factory Design”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1407-1410.
- C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
- D. Vandeplassche, J. C. Am?®lia, W. Beeckman, Y. Jongen, G. Lannoye, and S. Zaremba, “The C235 IBA-SHI Protontherapy Cyclotron for the NPTC Project: On Beam Dynamics Issues”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-05, pp. 454-457.
- F. Wang et al., “Linear Optics Calibration at the MIT-Bates South Hall Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP65, pp. 3101-3103.
Back to search