Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
[n] V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
[n] E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
[n] F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 403. doi:10.18429/JACoW-ICALEPCS2019-MOPHA085
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1251-1253. doi:10.18429/JACoW-IPAC2018-TUPMF003
[n] M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_049.
[n] G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
[n] G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] O. Gr, “Beam Induced Multipacting”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
[n] X. Zhang, V. Kamerdzhiev, A. L. Romanov, V. D. Shiltsev, and A. Valishev, “Tevatron Electron Lens and its Applications”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO02, pp. 103-106.
[n] I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n] N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
[n] M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 611-614. doi:10.18429/JACoW-IPAC2017-MOPIK045
[n] S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 296. doi:10.18429/JACoW-MEDSI2020-WEPB15
[n] M. Bassetti et al., “A.L.A. - A 1.2 GeV High Luminosity Electron-Positron Storage Ring Design Study”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3249-3252.
[n] H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
[n] B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS064, unpublished.
[n] C.-S. Hwang et al., “Superconducting Insertion Devices for Synchrotron Hard X-ray at SRRC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE037, pp. 2613-2615.
[n] J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2832-2835.
[n] W.-D. Klotz et al., “ITER Controls Design Status”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOB001, pp. XX-XX.
[n] Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
[n] N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n] I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
[n] L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
[n] J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580.
[n] Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
[n] R. L. Gluckstern, “Effect of Errors in Repetitive Structures”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 5-02, pp. 190-195.
[n] Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-10, pp. 617-620.
[n] Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67.
[n] R. Narayanan et al., “Applications of an Indigenously Developed Compact ECR Plasma Source [CEPS] at IIT Delhi”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRT7AUCO21, unpublished.
[n] R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
[n] C. Gough et al., “The SLS Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
[n] K. Schindl et al., “The LHC Lead Ion Injector Chain”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT011, pp. 1153-1155.
[n] T. Hoffmann, G. Jan?ía, and M. Schwickert, “FESA at FAIR - The Front-End Software Architecture”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP009, pp. 4794-4796.
[n] P. Grand, “The Physical Design of a 200 - MeV Linac Facility”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 860-867.
[n] J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper C-03, pp. 319-322.
[n] J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1199-1202.
For LaTeX
Use Complete Form
For BibTeX
References
- J. H. Han et al., “Beam Operation of the PAL-XFEL Injector Test Facility”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper WEB02, pp. 615-622.
- V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
- E. Piselli et al., “CERN-SPS Wire Scanner Impedence and Wire Heating Studies”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF16, pp. 88-92.
- F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 403.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1251-1253.
- M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_049.
- G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286.
- G. Arduini, K. Cornelis, G. Ferioli, L. Jensen, and F. Zimmermann, “Transverse Instabilities of the LHC Proton Beam in the SPS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP6B02, pp. 341-343.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- O. Gr, “Beam Induced Multipacting”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P004, pp. 3589-3591.
- X. Zhang, V. Kamerdzhiev, A. L. Romanov, V. D. Shiltsev, and A. Valishev, “Tevatron Electron Lens and its Applications”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO02, pp. 103-106.
- I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2910-2913.
- N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
- M. A. Fraser et al., “SPS Slow Extraction Losses and Activation: Challenges and Possibilities for Improvement”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 611-614.
- S. J. Bean et al., “A Novel Vacuum Chamber Design for the APS Upgrade of the 26-ID Nanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 296.
- M. Bassetti et al., “A.L.A. - A 1.2 GeV High Luminosity Electron-Positron Storage Ring Design Study”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3249-3252.
- H. Aksakal, A. K. Ciftci, D. Schulte, and F. Zimmermann, “Photon-Nucleon Collider Based on LHC and CLIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP010, pp. 1207-1209.
- B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS064, unpublished.
- C.-S. Hwang et al., “Superconducting Insertion Devices for Synchrotron Hard X-ray at SRRC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE037, pp. 2613-2615.
- J. Bosser et al., “Operational Aspects of Electron Cooling at the Low Energy Antiproton Ring (LEAR)”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2832-2835.
- W.-D. Klotz et al., “ITER Controls Design Status”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOB001, pp. XX-XX.
- Yu. N. Denisov, “The JINR Phasotron: Status and Progress”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J48, pp. 494-495.
- N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2239-2242.
- I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322.
- L. Geoffroy, R. Sabjan, and R. Stefanic, “EPICS to TANGO Translator”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper FOPA05, pp. 739-741.
- J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 576-580.
- Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
- R. L. Gluckstern, “Effect of Errors in Repetitive Structures”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 5-02, pp. 190-195.
- Yu. N. Denisov and V. N. Anosov, “Automatic Parameter Measuring Systems and Control Systems for Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-10, pp. 617-620.
- Yu. N. Denisov, “Cyclotrons of the JINR Laboratory of Nuclear Problems (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-07, pp. 62-67.
- R. Narayanan et al., “Applications of an Indigenously Developed Compact ECR Plasma Source [CEPS] at IIT Delhi”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRT7AUCO21, unpublished.
- R. Bossart et al., “CLIC Test Facility Developments and Results”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC10, pp. 719-721.
- C. Gough et al., “The SLS Booster Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586.
- K. Schindl et al., “The LHC Lead Ion Injector Chain”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT011, pp. 1153-1155.
- T. Hoffmann, G. Jan?ía, and M. Schwickert, “FESA at FAIR - The Front-End Software Architecture”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP009, pp. 4794-4796.
- P. Grand, “The Physical Design of a 200 - MeV Linac Facility”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 860-867.
- J. B. Flanz et al., “Initial Equipment Commissioning of the Northeast Proton Therapy Center”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper C-03, pp. 319-322.
- J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1199-1202.
Back to search