JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081. 
[n]	D. L. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Object Oriented C++ Software Components for Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL6, pp. 369-371. 
[n]	R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49. 
[n]	F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347. 
[n]	R. Winje, “A 230 kJ Pulsed Power Supply”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1317-1321. 
[n]	K. Adachi et al., “An electron model of vertical FFA accelerator for Harmonytron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1434-1436. doi:10.18429/JACoW-IPAC2023-TUPA043
[n]	W. R. Smythe, C. C. Friedrichs, and L. S. Walling, “Proton Synchrotron RF Cavity Mode Damper Tests”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 643-646. 
[n]	G. Shen, Y. Hu, M. R. Kraimer, K. Shroff, and D. Dezman, “NSLS II Middlelayer Services”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC155, pp. 467-470. 
[n]	C. Pai et al., “Mechanical Design of a Ferrite-Based Injection Kicker for SNS Accumulator Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB048, pp. 2144-2146. 
[n]	E. Jones, M. S. McAshan, and L. R. Suelzle, “Report on Performance of the Superconducting Injector for the Stanford Linear Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1000-1004. 
[n]	O. Felden, M. Bai, R. Gebel, and R. Hecker, “Activities for Isotope Sample Production and Radiation Effect Tests at JULIC/COSY J??lich”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 98-101. doi:10.18429/JACoW-Cyclotrons2016-MOP18
[n]	T. M. Cobb, P. N. Denison, and N. P. Rees, “Development of Photon Beamline and Motion Control Software at Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA10, pp. 108-110. 
[n]	R. Ghanbari et al., “Surface characterization of mid-T heat treated Nb samples to investigate the origin of residual resistance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3094-3097. doi:10.18429/JACoW-IPAC2023-WEPA194
[n]	A. Xiao, V. Sajaev, and Y. P. Sun, “Simulation Studies of the Helical Superconducting Undulator Installed at APS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1290-1292. doi:10.18429/JACoW-IPAC2018-TUPMF018
[n]	H. J. Choi, K. H. Gil, H.-S. Kang, H.-G. Lee, S. B. Lee, and K. W. Seo, “Introduction to WPS System Designed to Measure the Change of Location for PAL-XFEL Girder”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2693-2695. doi:10.18429/JACoW-IPAC2016-WEPOR015
[n]	A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320. 
[n]	J. Haimson and B. Mecklenburg, “HV Injection Phase Orbit Characteristics for Sub-Picosecond Bunch Operation with a High Gradient 17 GHz Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC22, pp. 755-757. 
[n]	P. W. Allison, C. R. Emigh, E. A. Meyer, D. W. Mueller, and R. R. Stevens, “Operation of the LAMPF 750-keV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 126-130. 
[n]	J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX. 
[n]	G. E. Lawler et al., “RF Testbed for Cryogenic Photoemission Studies”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2810-2813. doi:10.18429/JACoW-IPAC2021-WEPAB096
[n]	A. Aloev, R. Bartolini, B. Krause, A. Petrov, and M. Thede, “Status of the PETRA IV electromagnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3628-3630. doi:10.18429/JACoW-IPAC2023-WEPM033
[n]	I. Sato et al., “Development of a CW Electron Linac Structure Using a Traveling-Wave Resonant Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 533-536. 
[n]	G. Rakowsky, J. J. Aspenleiter, W. S. Graves, L. Solomon, and P. M. Stefan, “Magnetic Measurements on an In-Vacuum Undulator for the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P021, pp. 3497-3499. 
[n]	K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1830-1833. 
[n]	R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Smooth Rapid Current Build-up”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2400-2403. 
[n]	H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2903-2905. doi:10.18429/JACoW-IPAC2014-THPRO021
[n]	M. G. Mazarakis et al., “RADLAC-II Accelerator Beam Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 908-911. 
[n]	Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS052, unpublished. 
[n]	R. E. Laxdal, K. Fong, A. Grassellino, W. R. Rawnsley, I. Sekachev, and V. Zvyagintsev, “First Cold Test with the TRIUMF ISAC-II Phase II Cryomodule”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP052, pp. 2119-2119. 
[n]	R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249. 
[n]	V. V. Kushin, “Ion Acceleration in APF Systems”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper FR2-01, pp. 957-961. 
[n]	P. Forck and A. Bank, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI056, pp. 1885-1887. 
[n]	J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX. 
[n]	V. Shiltsev and A. Zinchenko, “Electron Beam Distortions in Beam-Beam Compensation Setup”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP91, pp. 1692-1694. 
[n]	E. A. Crosbie, “Effect of Synchrotron Radiation in the Propsed 4-GeV Argonne Microtron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3218-3221. 
[n]	S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 372-375. 
[n]	K. R. Prestwich and D. L. Johnson, “Development of a 18- Megavolt Marx Generator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 64-70. 
[n]	S. A. Griffiths, M. T. Heron, and D. E. Poole, “Commissioning of the New Magnet Power Converters on the SRS, and Operational Experience”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP036G, pp. 2329-2330. 
[n]	S. Zhou, J. Yang, C. Yu, W. Zhang, and Y. Zhu, “Radiation damage and refurbishment of undulator in SXFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB058, unpublished. 
[n]	K. H. Gil, H. J. Choi, J. Y. Huang, M. H. Jung, and J. H. Lim, “Analysis and Design of a New Kirkpatrick-Baez Mirror System for Microbeams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2081-2083. doi:10.18429/JACoW-IPAC2014-WEPRO059
[n]	Z. Patel et al., “Insertion Devices at Diamond Light Source: A Retrospective Plus Future Developments”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1592-1595. doi:10.18429/JACoW-IPAC2017-TUPAB116
[n]	K. T. Nguyen, R. F. Schneider, J. R. Smith, and H. S. Uhm, “Relativistic Electron Beam Ion Hose Instability in Beam-Induced Channels”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1096-1099. 
[n]	A. Zaltsman et al., “Progress of High Power FPC development for ERI SRF Cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA138, unpublished. 
[n]	T. Chanwattana, R. Bartolini, and A. Seryi, “Studies on LPWA-based Light Sources driven by a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2937-2939. doi:10.18429/JACoW-IPAC2014-THPRO032
[n]	E. Acerbi, G. Bellomo, L. Rossi, S. Zhou, and P. Gmaj, “The Magnetic Field Measurements of the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-07, pp. 486-489. 
[n]	R. L. Kustom, E. A. Crosbie, and T. K. Khoe, “A 1500 MeV Fixed-Field Alternating-Gradient Synchrotron for a Pulsed-Spallation Neutron Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2672-2675. 
[n]	H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2510-2513. 
[n]	K. K. Jain, B. N. Ding, and M. J. Rhee, “Scaling Study of Pseudospark Produced Electron Beam”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1972-1975. 
[n]	A. Warwick, D. Gough, D. Keefe, and H. Meuth, “Acceleration, Current Amplification and Emittance in MBE-4, an Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-06, pp. 51-53. 
[n]	M. G. Mazarakis et al., “RIIM Accelerator Beam Experiments”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3237-3240. 
[n]	D. J. Wallace et al., “Improvements in Aladdin Bend Magnet Stability by Reduction of Leakage Currents”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG017, pp. 2303-2305. 
[n]	V. S. Skachkov, “Split-Pole PM Dipoles and Quadrupoles with Variable Field”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP071G, pp. 2190-2191. 
[n]	I. Reichel, “Beam-Beam Simulations for PEP-II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAB003, pp. 344-346. 
[n]	Y. Chung, D. Barr, M. Borland, G. Decker, K. Kim, and J. Kirchman, “Development of GUS for Control Applications at the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1794-1797. 
[n]	R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533. 
[n]	J. DiMarco, G. W. Foster, V. Kashikhin, A. Makarov, and P. Schlabach, “Measurements of a Crenelated Iron Pole Tip for the VLHC Transmission Line Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP154, pp. 3327-3329. 
[n]	H. P. May, M. Bai, O. Felden, and R. Gebel, “Status of the COSY/J??lich Injector Cyclotron JULIC”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 310-312. doi:10.18429/JACoW-Cyclotrons2016-THP04
[n]	E. Acerbi et al., “Progress Report on the Milan Superconducting Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper B-02, pp. 26-29. 
[n]	H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search