Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. T. Sun et al., “Status Report on a Low Energy High Intensity High Charge State Heavy Ion Accelerator Facility at Imp”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR13, pp. XX-XX.
[n] F. Hug, R. Eichhorn, and A. Richter, “Beam Based Alignment Simulations and Measurements at the S-DALINAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP059, pp. 3841-3843.
[n] G. Kreps, A. Goessel, D. Kostin, W.-D. M?Âller, D. Proch, and K. Twarowski, “Excitation of Parasitic Modes in CW Cold Tests of 1.3 GHz TESLA-Type Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO036, pp. 289-291.
[n] S. Setzer et al., “Investigation of Dark Currents in the S-DALINAC Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG058, pp. 3569-3571.
[n] J. K. Sekutowicz, “Improved Heat Conduction Feedthroughs for HOM Couplers at DESY”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper WG3036, pp. 102-104.
[n] F. L. Barkov, A. Grassellino, and A. Romanenko, “Fast Table Top Niobium Hydride Investigations Using Direct Imaging in a Cryo-Stage”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP014, pp. 447-450.
[n] M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 639-642. doi:10.18429/JACoW-IPAC2019-MOPRB029
[n] S. M. Cousineau et al., “The SNS Laser Stripping Injection Experiment and its Implications on Beam Accumulation”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper THWCR02, pp. 140-144.
[n] F. Toufexis, P. Boussina, L. Campana, W. J. Corbett, and J. J. Sebek, “Multiplexer System for the SPEAR3 Booster BPM Upgrade”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 41-45. doi:10.18429/JACoW-IBIC2020-TUPP09
[n] K. E. Deitrick et al., “Development of an ERL for Coherent Electron Cooling at the Electron-Ion Collider”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 87-90. doi:10.18429/JACoW-COOL2023-THPOSRP17
[n] A. Scheinker, “Adaptive Machine Learning and Feedback Control for Automatic Particle Accelerator Tuning”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 916-918. doi:10.18429/JACoW-NAPAC2019-THXBA3
[n] T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Application of Non-Linear Time-Domain RF Simulations to Longitudinal Emittance Studies for the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP095, pp. 2234-2236.
[n] J. Tanabe, J. Staples, and R. Yourd, “Design of the ESCAR Injection Beam Line”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1605-1609.
[n] M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
[n] M. T. F. Pivi et al., “Secondary Electron Yield Measurements and Groove Chambers Update Tests in the PEP-II Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP064, pp. 691-693.
[n] E. G. Bessonov, M. V. Gorbunkov, and A. A. Mikhailichenko, “Proposal for an Enhanced Optical Cooling System Test in an Electron Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN059, pp. 3363-3365.
[n] S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB01, pp. 807-809.
[n] D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
[n] A. H. McEuen, P. Lui, E. Tanabe, and V. Vaguine, “High-Power Operation of Accelerator Structures at Liquid Nitrogen Temperature”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2972-2975.
[n] F. Filippi et al., “Plasma Density Profile Characterization for Resonant Plasma Wakefield Acceleration Experiment at SPARC_LAB”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2554-2556. doi:10.18429/JACoW-IPAC2016-WEPMY007
[n] C. D. Moore et al., “Design, Installation, and Initial Commissioning of the MTA Beamline”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB038, pp. 3966-3968.
For LaTeX
Use Complete Form
For BibTeX
References
- L. T. Sun et al., “Status Report on a Low Energy High Intensity High Charge State Heavy Ion Accelerator Facility at Imp”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR13, pp. XX-XX.
- F. Hug, R. Eichhorn, and A. Richter, “Beam Based Alignment Simulations and Measurements at the S-DALINAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP059, pp. 3841-3843.
- G. Kreps, A. Goessel, D. Kostin, W.-D. M?Âller, D. Proch, and K. Twarowski, “Excitation of Parasitic Modes in CW Cold Tests of 1.3 GHz TESLA-Type Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO036, pp. 289-291.
- S. Setzer et al., “Investigation of Dark Currents in the S-DALINAC Superconducting Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG058, pp. 3569-3571.
- J. K. Sekutowicz, “Improved Heat Conduction Feedthroughs for HOM Couplers at DESY”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper WG3036, pp. 102-104.
- F. L. Barkov, A. Grassellino, and A. Romanenko, “Fast Table Top Niobium Hydride Investigations Using Direct Imaging in a Cryo-Stage”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP014, pp. 447-450.
- M. T. Li, Y. W. An, S. Y. Xu, and T. G. Xu, “Longitudinal Tomography for Analysing the Longitudinal Phase Space Distribution in RCS of CSNS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 639-642.
- S. M. Cousineau et al., “The SNS Laser Stripping Injection Experiment and its Implications on Beam Accumulation”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper THWCR02, pp. 140-144.
- F. Toufexis, P. Boussina, L. Campana, W. J. Corbett, and J. J. Sebek, “Multiplexer System for the SPEAR3 Booster BPM Upgrade”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 41-45.
- K. E. Deitrick et al., “Development of an ERL for Coherent Electron Cooling at the Electron-Ion Collider”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP17, pp. 87-90.
- A. Scheinker, “Adaptive Machine Learning and Feedback Control for Automatic Particle Accelerator Tuning”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 916-918.
- T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Application of Non-Linear Time-Domain RF Simulations to Longitudinal Emittance Studies for the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP095, pp. 2234-2236.
- J. Tanabe, J. Staples, and R. Yourd, “Design of the ESCAR Injection Beam Line”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1605-1609.
- M. Chowdhary, L. Doolittle, G. Lahti, S. N. Simrock, and R. Terrell, “Automated Frequency Tuning of SRF Cavities at CEBAF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR14, pp. 2268-2270.
- M. T. F. Pivi et al., “Secondary Electron Yield Measurements and Groove Chambers Update Tests in the PEP-II Beam Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP064, pp. 691-693.
- E. G. Bessonov, M. V. Gorbunkov, and A. A. Mikhailichenko, “Proposal for an Enhanced Optical Cooling System Test in an Electron Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN059, pp. 3363-3365.
- S. Fu, J. Li, H. C. Liu, H. F. Ouyang, and X. Yin, “Linac Construction for China Spallation Neutron Source”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB01, pp. 807-809.
- D. A. Liakin, P. Forck, K. Lang, and R. Singh, “Advanced Digital Signal Processing for Effective Beam Position Monitoring”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD16, pp. 74-76.
- A. H. McEuen, P. Lui, E. Tanabe, and V. Vaguine, “High-Power Operation of Accelerator Structures at Liquid Nitrogen Temperature”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2972-2975.
- F. Filippi et al., “Plasma Density Profile Characterization for Resonant Plasma Wakefield Acceleration Experiment at SPARC_LAB”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2554-2556.
- C. D. Moore et al., “Design, Installation, and Initial Commissioning of the MTA Beamline”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB038, pp. 3966-3968.
Back to search