JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Checchin, A. Grassellino, M. Martinello, S. Posen, A. Romanenko, and J. Zasadzinski, “Ultimate Gradient Limitation in Niobium Superconducting Accelerating Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2254-2257. doi:10.18429/JACoW-IPAC2016-WEPMR002
[n]	M. Krasilnikov, J. W. Baehr, M. H?ñnel, F. Stephan, and I. Will, “Experimental Optimization of the Cathode Laser Temporal Profile”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB29, pp. 135-137. 
[n]	D. R. Anderson et al., “Design of a 6 MeV Electron Cooling System for the SSC Medium Energy Booster”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 836-839. 
[n]	Q. Xia, L. Zheng, and Y. Du, “Experimental design for validating the feasibility of in-situ plasma cleaning of normal conducting copper cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3901-3903. doi:10.18429/JACoW-IPAC2024-THPS66
[n]	D. Reschke, “Basic Studies for Process Parameter Developmenst for EP/HPR/Snow Cleaning”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THOAAU02, pp. 462-462. 
[n]	M. Thieme, W. Panschow, S. Rauch, and M. Zweig, “Single Board Computer for Device Control in the FAIR Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP060, pp. XX-XX. 
[n]	F. M. Liu et al., “Drive Laser System for the DC-SRF Photoinjector at Peking University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4076-4078. doi:10.18429/JACoW-IPAC2016-THPOW058
[n]	J. Jiang, H. B. Chen, J. Shi, and P. Wang, “A C-band Deflecting Cavity Design for High-precision Bunch Length Measurement”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2948-2951. doi:10.18429/JACoW-IPAC2015-WEPMN014
[n]	F. Eoz?®nou, C. Z. Antoine, S. Berry, J.-P. Charrier, Y. Gasser, and D. Reschke, “Low-Voltage Electro-Polishing of SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO070, pp. 781-785. 
[n]	Y. W. An and S. Wang, “Application of Orbit Response Matrix Method at CSNS/RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS011, pp. 2505-2507. 
[n]	P. Bernard et al., “Status Report of the Superconducting 5-Cell Acceleration Structure at CERN”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3342-3345. 
[n]	W. Chou and Y. Jin, “Impedance Calculations for 2-D and 3-D Structures and the Impedance Budget of 7-GeV APS Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 909-912. 
[n]	B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1858-1860. doi:10.18429/JACoW-IPAC2017-TUPIK070
[n]	E. Pozdeyev et al., “Beam Commissioning and Integrated Test of the PIP-II Injector Test Facility”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 13-17. doi:10.18429/JACoW-LINAC2022-MO1PA01
[n]	Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n]	C. H. Chen et al., “A Compact, Wavelength Tunable MW-THz FEL Amplifier”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 789-792. doi:10.18429/JACoW-IPAC2016-MOPOW035
[n]	M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n]	X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n]	M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395. 
[n]	S. Rimjaem et al., “Measurements and Simulations of Emittance for Different Bunch Charges at PITZ”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB09, pp. 410-413. 
[n]	W. Fox, “The Pros and Cons of Cryogenic Accelerators: an Engineering Point of View”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE103, pp. 515-517. 
[n]	D. Reschke, “Challenges in SRF Module Production for the European XFEL”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOIOA01, pp. 2-6. 
[n]	Y. Li, Y. W. An, L. Huang, W. B. Liu, and S. Wang, “Beam-based Alignment Simulation on Transport Line of CSNS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3818-3820. doi:10.18429/JACoW-IPAC2015-THPF051
[n]	J. W. Baehr et al., “First Results from the Upgraded PITZ Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC004, pp. 70-72. 
[n]	A. Narayanan, “Mu2e resonant extraction regulation system simulation in Delivery Ring”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP044, unpublished. 
[n]	W. Lawson, J. P. Calame, J. Cheng, V. L. Granatstein, P. E. Latham, and M. Reiser, “Experimental Design of 100 MW X-Band and Ku-Band Gyroklystrons (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-35, pp. 448-450. 
[n]	M. Sachwitz, P. Castro, H.-J. Grabosch, U. Hahn, and H. Thom, “Wire Scanners in the Undulator Section of the VUV-FEL DESY”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT027, pp. XX-XX. 
[n]	T. Kikuchi, N. Harada, T. Sasaki, H. Tamukai, and T. Katayama, “Beam Dynamics Simulation on Simultaneous use of Stochastic Cooling and Electron Cooling with Internal Target”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS004, pp. 3433-3435. 
[n]	O. Caretta, T. W. Davies, C. J. Densham, P. Loveridge, and R. M. Woods, “Morphology of a Powder Jet as a Target for the Neutrino Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP032, pp. 2859-2859. 
[n]	J. Jiang, H. B. Chen, J. Shi, P. Wang, L. Zhang, and S. X. Zheng, “C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 386-388. doi:10.18429/JACoW-IPAC2016-MOPMR060
[n]	U. Hahn et al., “Design and Tests of a New Microwave Beam Position Monitor for the Undulator of the TTF-FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40G, pp. 1541-1543. 
[n]	V. P. Nagaslaev and I. L. Rakhno, “MARS Tracking Simulations for the Mu2e Slow Extracted Proton Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4010-4012. doi:10.18429/JACoW-IPAC2015-THPF125
[n]	B. Song et al., “Advances in beam physics and technology for ultrafast electron diffraction”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOYN02, unpublished. 
[n]	Y. Li, Y. W. An, Z. P. Li, W. B. Liu, and S. Wang, “Transport Line Orbit Correction for CSNS/RTBT”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA036, pp. 154-156. 
[n]	W. Lawson et al., “Initial Operation of the Maryland Coaxial Gyroklystron Experiment”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P038, pp. 3168-3170. 
[n]	T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843. 
[n]	Y.-M. Abiven, P. Betinelli-Deck, J. Bisou, F. Blache, G. Renaud, and S. Z. Zhang, “Open Hardware Collaboration: A Way to Improve Efficiency for a Team”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC077, pp. 273-276. 
[n]	E. Rossa, N. Adams, J.-M. Roth, and F. Tomasini, “Double Sweep Streak Camera for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 783-786. 
[n]	G. Renaud, Y.-M. Abiven, F. Ta, Q. H. Tran, and S. Zhang, “MACUP (Material for data ACquisition - UPgrade): Project Focusing on DAQ Hardware Architecture Upgrades for SOLEIL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1330-1334. doi:10.18429/JACoW-ICALEPCS2017-THMPA09
[n]	Ye. Ivanisenko, C. H. Boulware, L. Staykov, and F. Stephan, “Slice Emittance Measurements Using an Energy Chirped Beam in a Dispersive Section at PITZ”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH079, pp. 425-428. 
[n]	V. P. Nagaslaev, V. A. Lebedev, J. P. Morgan, and D. Vander Meulen, “8 GeV Beam Line Optics Optimization for the Rapid Antiproton Transfers at Fermilab”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA010, pp. 345-347. 
[n]	D. Reschke, L. Lilje, and H. Weise, “Analysis of RF Results of Recent Nine-Cell Cavities at DESY”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO051, pp. 342-346. 
[n]	P. Bernard, J. Faure, and R. Vienet, “A 100 mA Ion Beam with a Large Brightness”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-01, pp. 395-397. 
[n]	R. Cole and W. H. Atkins, “Real-Time Data Archiving for GTA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-28, pp. 118-120. 
[n]	M. J. Syphers and A. Narayanan, “Sensitivity Analyses of All-Electric Storage Ring Designs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1148-1151. doi:10.18429/JACoW-IPAC2019-MOPTS113
[n]	M. Martinello et al., “Surface Impurity Content Optimization to Maximize Q-factors of Superconducting Resonators”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 663-666. doi:10.18429/JACoW-NAPAC2016-WEB1CO03
[n]	Y. K. Chen, H. T. Jing, C. Meng, Y. P. Song, J. Y. Tang, and G. Zhao, “Proton Beam Steering for the Experimental Muon Source at CSNS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 193-195. doi:10.18429/JACoW-IPAC2019-MOPGW046
[n]	L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405. 
[n]	G. Issarovitch, D. Proch, D. Reschke, W. Singer, and X. Singer, “Development of Centrifugal Barrel Polishing for Treatment of Superconducting Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP56, pp. 482-485. 
[n]	G. Renaud, G. Abeille, E. Elkaim, E. Fonda, F. Langlois, and J. Malik, “Continuous Scan at Synchrotron Soleil”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP054, pp. 507-509. 
[n]	J. Tuckmantel et al., “Superconducting Cavitites for the LEP Energy Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 806-809. 
[n]	Y. Li, Y. W. An, Z. P. Li, W. B. Liu, and S. Wang, “Beam-Based Alignment for the Transport Line of CSNS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1121-1123. doi:10.18429/JACoW-IPAC2016-TUPMB008
[n]	M. A. Khojoyan et al., “Measurement and Simulation Studies of Emittance for Short Gaussian Pulses at PITZ”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB06, pp. 402-405. 
[n]	T. Kikuchi, C. Buttapeng, N. Harada, K. Horioka, T. Sasaki, and K. Takayama, “Beamline for Warm Dense Matter Experiment Using the KEK Digital Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP095, pp. 1519-1521. 
[n]	A. Shapovalov and L. Staykov, “Emittance Measurement Wizard at PITZ”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM057, pp. 282-286. 
[n]	S. Pauliuk et al., “A Fast Switching Mirror Chamber for FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC027, pp. 124-126. 
[n]	T. Wei, P. Li, Y. Li, and J. Pflueger, “Spontaneous Radiation of High-order Magnetic Field Undulator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 146-149. doi:10.18429/JACoW-SAP2017-TUPH09
[n]	D. J. Holder, D. Laundy, and G. Priebe, “COBALD - an Inverse Compton Back-scattering Source at Daresbury”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC040, pp. 160-162. 
[n]	X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n]	S. Rimjaem et al., “Comparison of Different Radiators used to Measure the Transverse Characteristics of Low Energy Electron Beams at PITZ”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD54, pp. 428-430. 
[n]	F. Furuta et al., “High-efficiency, High-current Optimized Main-linac ERL Cryomodule”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 935-940. doi:10.18429/JACoW-SRF2017-FRXAA02
[n]	Y. Y. Guo, J. Chen, Z. Duan, Y. Jiao, Y. M. Peng, and G. Xu, “The Injection and Extraction Design of the Booster for the HEPS Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1356-1358. doi:10.18429/JACoW-IPAC2018-TUPMF046
[n]	S. P. Antipov, E. Gomez, R. Celestre, and T. Roth, “Diamond Refractive Optics Fabrication by Laser Ablation and at-Wavelength Testing”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 59. doi:10.18429/JACoW-MEDSI2020-MOPC03
[n]	H. F. Breede, H.-J. Grabosch, M. Sachwitz, and L. V. Vu, “A New Compact Design of a Three-Dimensional Ionization Profile Monitor (IPM)”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF04, pp. 811-813. 
[n]	X. Li, Y. Liu, W. Long, B. Wu, W. J. Wu, and C. L. Zhang, “Development of Dual-harmonic RF System for CSNS-II”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 312-315. doi:10.18429/JACoW-HB2023-WEC4I2
[n]	W. Lawson et al., “Experimental Gyroklystron Studies for TeV Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-31, pp. 383-385. 
[n]	T. Kikuchi et al., “Numerical Study on Simultaneous Use of Stochastic Cooling and Electron Cooling with Internal Target at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD070, pp. 852-854. 
[n]	M. A. Ibrahim et al., “Preliminary Design of Mu2E Spill Regulation System (SRS)”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 177-180. doi:10.18429/JACoW-IBIC2019-MOPP033

For LaTeX

Use Complete Form

For BibTeX

References

Back to search