JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659. 
[n]	S. Rowan et al., “Interactions between Macroparticles and High-Energy Proton Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2112-2115. doi:10.18429/JACoW-IPAC2015-TUPTY045
[n]	W. Lawson et al., “Experimental Gyroklystron Studies for TeV Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-31, pp. 383-385. 
[n]	I. Ben-Zvi et al., “A Superconducting Short Period Undulator for a Harmonic Generation FEL Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1439-1442. 
[n]	G. Jurgens and W. Miller, “Tuning of the First 805 MHz Side-Coupled Cavity Module for the Fermilab Upgrade”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2996-2999. 
[n]	S. W. Mosko, D. T. Dowling, and D. K. Olsen, “Prototype RF Cavity for the HISTRAP Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 193-196. 
[n]	F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728. 
[n]	M. J. Borden, C. A. Chapman, C. T. Kelsey, J. F. O, and J. Sturrock, “LANSCE Fail Safe Radiation Shutter Design for Isotope Production Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS047, pp. 539-541. 
[n]	W. Cheng et al., “Beam position monitoring system and beam commissioning at APS-U storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2170-2172. doi:10.18429/JACoW-IPAC2024-WEPG01
[n]	M. M. Lipinski, J. Serrano, T. Wlostowski, and C. Prados, “Reliability in a White Rabbit Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU007, pp. 698-701. 
[n]	N. T. Callaway, R. W. Garnett, K. W. Jones, M. A. Oothoudt, and B. D. Ray, “Availability Results for the LANSCE Accelerator Complex”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W023, pp. 1165-1167. 
[n]	M. S. Gulley, “Tuning the Beam: a Physics Perspective on Beam Diagnostic Instrumentation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WETNB01, pp. 491-497. 
[n]	I. Lobach, A. Sannibale, J. Edelen, and M. Borland, “Long short-term memory networks for anomaly detection in storage ring power supplies”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4424-4427. doi:10.18429/JACoW-IPAC2023-THPL005
[n]	R. Ando et al., “FEL with Orotron Type Feedback”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH020, pp. 61-64. 
[n]	A. L. Romanov, A. Valishev, D. L. Bruhwiler, N. M. Cook, and C. C. Hall, “Adaptive Matching of the IOTA Ring Linear Optics for Space Charge Compensation”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1152-1154. doi:10.18429/JACoW-NAPAC2016-THPOA23
[n]	Y. M. Pischalnikov et al., “Extended Range SRF Cavity Tuner for LCLS II HE Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 203. doi:10.18429/JACoW-SRF2021-MOPTEV002
[n]	C. D. Striffler et al., “Electron Ring Accelerator Research at the University of Maryland”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4234-4237. 
[n]	L. Feng et al., “Drive Laser System for Shanghai Soft X-Ray Free Electron Laser”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4403-4405. doi:10.18429/JACoW-IPAC2021-THPAB313
[n]	F. Armborst, P. Goslawski, and A. Jankowiak, “Tune and Chromaticity Optimization at Bessy II for the Transverse Resonant Island Bucket Optics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1411-1414. doi:10.18429/JACoW-IPAC2019-TUPGW013
[n]	G. Wang et al., “On-resonance round beam experiment in the HLS-II storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1079-1081. doi:10.18429/JACoW-IPAC2023-MOPM039
[n]	T. Tajima et al., “LANSCE Vacuum System Refurbishment Plan and Vacuum Alert System Improvements for Predictive Maintenance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP150, pp. 3717-3719. 
[n]	Z. Q. Li et al., “Developed Spoke Cavity Module for Main Linac of China ADS HOM Simulations and Damping Scheme for CEPC Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 393-395. doi:10.18429/JACoW-SRF2017-TUPB005
[n]	S. A. Kahn and M. Diwan, “Spectrum from the Proposed BNL Very Long Baseline Neutrino Facility”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT059, pp. 3476-3478. 
[n]	D. C. Nguyen, P. M. Anisimov, C. E. Buechler, and Q. R. Marksteiner, “Distributed Seeding for Narrow-band X-ray Free-Electron Lasers”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 301-304. doi:10.18429/JACoW-FEL2015-TUB02
[n]	C. H. Kuo, J. Chen, K.-T. Hsu, S. Y. Hsu, and Y.-T. Yang, “The Synchrotron Radiation Monitor Upgradation in NSRRC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT091, pp. 2709-2711. 
[n]	J. Bojowald et al., “Diagnostic Tools for the COSY-Juelich Synchrotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1515-1518. 
[n]	Y. Gao et al., “Bayesian optimization calibration of ionization profile monitor at the AGS complex”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4444-4447. doi:10.18429/JACoW-IPAC2023-THPL012
[n]	R. A. Rimmer, N. Hartman, A. S. Ladran, D. Li, and A. Moretti, “Closed-Cell 201.25 MHz RF Structures for a Muon Ionization Cooling Experiment”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO011, pp. 2190-2192. 
[n]	G. Liu and N. Neufeld, “Management of the LHCb Online Network Based on SCADA System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED004, pp. 621-623. 
[n]	B. C. Kuske, R. Follath, and A. Meseck, “Development and Application of Figures of Merit to Evaluate the Output of HGHG FEL Cascades”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH051, pp. 154-157. 
[n]	N. Kinoshita et al., “Quantitative Determination of 146Sm/147Sm Ratios by Accelerator Mass Spectrometry with an ECR Ion Source and Linear Acceleration for 146Sm Half-Life Measurement”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP01, pp. 43-45. 
[n]	F. Fontanelli, B. Jost, G. Mini, N. Neufeld, and M. Sannino, “Embedded PCs for Electronics Control in LHCB”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_001. 
[n]	J. Dietrich, A. H. Botha, J. L. Conradie, J. L. G. Delsink, I. Mohos, and P. F. Rohwer, “Beam Position Monitor Development for the IThemba LABS Cyclotron Beamlines”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT047, pp. 2589-2591. 
[n]	C. Youngman, B. Fernandes, P. Gessler, J. Coughlan, E. Motuk, and M. Zimmer, “Electronics Developments for High Speed Data Throughput and Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC086, pp. 778-781. 
[n]	J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348. 
[n]	L. O. Dallin, “Design Considerations for an Ultralow Emittance Storage Ring for the Canadian Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1334-1337. doi:10.18429/JACoW-IPAC2018-TUPMF038
[n]	B. Giaccone et al., “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1231-1238. doi:10.18429/JACoW-SRF2019-FRCAB7
[n]	R. A. Rimmer, N. Hartman, S. Lidia, and S. H. Wang, “A High-Gradient High-Duty-Factor RF Photo-cathode Electron Gun”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI040, pp. 1801-1803. 
[n]	N. Barov et al., “Measurements of Plasma Wake-Fields in the Blow-Out Regime”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG06, pp. 631-633. 
[n]	K. P. Nesteruk, M. Auger, S. Braccini, T. S. Carzaniga, A. Ereditato, and P. Scampoli, “Study of the Transverse Beam Emittance of the Bern Medical Cyclotron”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 134-138. doi:10.18429/JACoW-IBIC2015-MOPB041
[n]	N. Barov, M. Conde, W. Gai, and J. B. Rosenzweig, “Results of Blowout Regime Propagation Experiments of an Electron Beam in a Plasma”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC005, pp. XX-XX. 
[n]	W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433. 
[n]	J. N. Bai et al., “First Idea on Bunch to Bucket Transfer for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO024, pp. 207-209. 
[n]	C. Gaspar et al., “Configuring and Automating an LHC Experiment for Faster and Better Physics Output”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1233-1239. doi:10.18429/JACoW-ICALEPCS2017-THDPL01
[n]	M. A. C. Cummings et al., “Intense Stopping Muon Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP071, pp. 712-714. 
[n]	A. Halavanau et al., “Progress Report on Population Inversion-Based X-Ray Laser Oscillator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 373-375. doi:10.18429/JACoW-IPAC2021-MOPAB100
[n]	M. G. Abbott, G. Rehm, and I. Uzun, “A New Fast Data Logger and Viewer at Diamond: the FA Archiver”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST03, pp. 1244-1247. 
[n]	K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911. 
[n]	E. Bouquerel et al., “Design of a Beamline From a TR24 Cyclotron for Biological Tissues Irradiation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 564-566. doi:10.18429/JACoW-IPAC2017-MOPIK030
[n]	T. Tajima et al., “LANSCE Vacuum System Improvements for Higher Reliability and Availability”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS053, pp. 557-559. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search