Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4044-4046. doi:10.18429/JACoW-IPAC2023-THPA041
[n] W. H?Âfle et al., “Impact of a Wideband Feedback Prototype System on TMCI in the SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1208-1211. doi:10.18429/JACoW-IPAC2018-TUZGBD4
[n] J. C. Dooling, M. Borland, K. C. Harkay, R. T. Keane, B. J. Micklich, and C. Yao, “A Fast Beam Interlock System for the Advanced Photon Source Particle Accumulator Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1815-1818. doi:10.18429/JACoW-IPAC2018-WEPAF005
[n] G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
[n] A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
[n] B. Gladwyn, M. Duncan, O. Mohsen, and R. Ainsworth, “Impedance model for the Fermilab Recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3167-3170. doi:10.18429/JACoW-IPAC2024-THPC64
[n] U. Ratzinger et al., “Deceleration of Highly Charged Ions for the HITRAP Project at GSI”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP063, pp. 189-191.
[n] A. Olmos et al., “Integration of the Diamond Transverse Multibunch Feedback System at ALBA”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 414-417. doi:10.18429/JACoW-IBIC2015-TUPB046
[n] H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
[n] S. Stapnes, “CLIC Status and Outlook”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEYA01, pp. 2076-2080.
[n] B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
[n] E. W. Nissen, F. Lin, V. S. Morozov, and Y. Zhang, “Design of the Proposed Low Energy Ion Collider Ring at Jefferson Lab”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO077, pp. 1058-1060.
[n] E. N. Shaposhnikova, S. D. Fartoukh, and J.-B. Jeanneret, “LHC Abort Gap Filling by Proton Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT031, pp. 611-613.
[n] G. Kotzian, W. H?â, and D. Valuch, “Sensitivity of the LHC Transverse Feedback System to Intra-Bunch Motion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1916-1919. doi:10.18429/JACoW-IPAC2017-TUPIK093
[n] C. Ronsivalle, L. Picardi, M. Vadrucci, and F. Ambrosini, “Simple Characterization Method of Small High Gradient Permanent Magnet Quadrupoles”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1250-1252. doi:10.18429/JACoW-IPAC2014-TUPRO091
[n] P. Forck et al., “Scintillation Screen Investigations for High Energy Heavy Ion Beams at GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD53, pp. 170-172.
[n] A. Ghaith et al., “Cryogenic Permanent Magnet Undulator for an FEL Application”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 554-556. doi:10.18429/JACoW-FEL2017-WEP065
[n] S. Chel, A. Mosnier, T. Junquera, and M. Fouaidy, “Thermal Study of HOM Couplers for Superconducting RF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 855-858.
[n] R. A. Jameson, R. L. Cady, D. J. Liska, J. B. Sharp, G. R. Swain, and J. D. Wallace, “Full Power Operation of the LAMPF 805 MHz System”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-2, pp. 483-504.
[n] S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
[n] G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278.
[n] J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 128-130. doi:10.18429/JACoW-IPAC2014-MOPRO028
[n] J. Spasic et al., “An Enhanced Quench Detection System for Main Quadrupole Magnets in the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2032-2035. doi:10.18429/JACoW-IPAC2018-WEPAF081
[n] L. Krawczyk and S. Kurennoy, “Funnel Cavities for 4-MW Upgrade of Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA84, pp. 3588-3590.
[n] M. M. Peng et al., “Optimization of a Single-Cell Accelerating Structure for Rf Breakdown Test With Short Rf Pulses”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 747-750. doi:10.18429/JACoW-NAPAC2019-WEPLM67
[n] D. Sun et al., “Microwave Quality Assurance Effort for R&D on the Next Linear Collider at Fermilab”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH307, pp. 1198-1200.
[n] G. H. Rees, “Overview of Future Spallation Neutron Sources”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3731-3736.
[n] T. Asaka et al., “Adaptive 3-D UV-laser Pulse Shaping System to Minimize Emittance for Photocathode RF Gun”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEBAU01, pp. 298-305.
[n] M. Fouaidy, B. Aune, R. Brizzi, J. Gratadour, M. Juillard, and T. Junquera, “Thermal Model Calculations in Superconducting RF Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1304-1307.
[n] X. N. Gavald?á, A. D?¡az Ortiz, and L. S. Nadolski, “Multi-objective Optimization of the Linear and Non-linear Beam Dynamics of Synchrotron SOLEIL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 388-390. doi:10.18429/JACoW-IPAC2014-MOPME007
[n] M. B??scher et al., “Polarized Proton Beams From Laser-Induced Plasmas”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 46-51. doi:10.18429/JACoW-ICAP2018-SUPAF05
[n] H. Ghasem, J. Alabau-Gonzalvo, F. Antoniou, S. Papadopoulou, and Y. Papaphilippou, “NONLINEAR OPTIMIZATION OF CLIC DRS NEW DESIGN WITH VARIABLE BENDS AND HIGH FIELD WIGGLERS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2416-2419. doi:10.18429/JACoW-IPAC2016-WEPMW003
[n] I. Martini et al., “Surface Characterization at CERN of Photocathodes for Photoinjector Applications”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1703-1705. doi:10.18429/JACoW-IPAC2015-TUPJE040
[n] S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 706-709.
[n] M. Omet, A. Kuramoto, H. Hayano, T. Matsumoto, and S. Michizono, “Development and Test of a Fully Automated PkQl Control Procedure at KEK STF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME013, pp. 2950-2952.
[n] Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
[n] J. Bahrdt, B. Faatz, V. Miltchev, R. Reininger, and R. Treusch, “The Properties of the FEL Output for Different Seeding Schemes”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH050, pp. 150-153.
[n] L. Serafini, C. Pagani, A. Peretti, and M. Zanin, “Self-Consistent PIC Simulations of Beam-Cavity Interactions Using Rician Sub-Beams”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-66, pp. 796-798.
[n] P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
[n] A. Alekou, Y. Papaphilippou, and D. Spitzbart, “High-Power Proton-Synchrotron Collimation Studies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 879-881. doi:10.18429/JACoW-IPAC2014-MOPRI109
[n] H. Kim et al., “RF preparation of QWR cavities for beam commissioning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3033-3035. doi:10.18429/JACoW-IPAC2023-WEPA166
[n] T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 438-442.
[n] A. Canabal et al., “Full Real-time Temperature Mapping System for 9-cell ILC-type Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP121, pp. 841-843.
For LaTeX
Use Complete Form
For BibTeX
References
- J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA041, pp. 4044-4046.
- W. H?Âfle et al., “Impact of a Wideband Feedback Prototype System on TMCI in the SPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1208-1211.
- J. C. Dooling, M. Borland, K. C. Harkay, R. T. Keane, B. J. Micklich, and C. Yao, “A Fast Beam Interlock System for the Advanced Photon Source Particle Accumulator Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1815-1818.
- G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514.
- A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
- B. Gladwyn, M. Duncan, O. Mohsen, and R. Ainsworth, “Impedance model for the Fermilab Recycler ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC64, pp. 3167-3170.
- U. Ratzinger et al., “Deceleration of Highly Charged Ions for the HITRAP Project at GSI”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP063, pp. 189-191.
- A. Olmos et al., “Integration of the Diamond Transverse Multibunch Feedback System at ALBA”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 414-417.
- H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398.
- S. Stapnes, “CLIC Status and Outlook”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEYA01, pp. 2076-2080.
- B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829.
- E. W. Nissen, F. Lin, V. S. Morozov, and Y. Zhang, “Design of the Proposed Low Energy Ion Collider Ring at Jefferson Lab”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO077, pp. 1058-1060.
- E. N. Shaposhnikova, S. D. Fartoukh, and J.-B. Jeanneret, “LHC Abort Gap Filling by Proton Beam”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT031, pp. 611-613.
- G. Kotzian, W. H?â, and D. Valuch, “Sensitivity of the LHC Transverse Feedback System to Intra-Bunch Motion”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1916-1919.
- C. Ronsivalle, L. Picardi, M. Vadrucci, and F. Ambrosini, “Simple Characterization Method of Small High Gradient Permanent Magnet Quadrupoles”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1250-1252.
- P. Forck et al., “Scintillation Screen Investigations for High Energy Heavy Ion Beams at GSI”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD53, pp. 170-172.
- A. Ghaith et al., “Cryogenic Permanent Magnet Undulator for an FEL Application”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 554-556.
- S. Chel, A. Mosnier, T. Junquera, and M. Fouaidy, “Thermal Study of HOM Couplers for Superconducting RF Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 855-858.
- R. A. Jameson, R. L. Cady, D. J. Liska, J. B. Sharp, G. R. Swain, and J. D. Wallace, “Full Power Operation of the LAMPF 805 MHz System”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-2, pp. 483-504.
- S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583.
- G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278.
- J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 128-130.
- J. Spasic et al., “An Enhanced Quench Detection System for Main Quadrupole Magnets in the Large Hadron Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2032-2035.
- L. Krawczyk and S. Kurennoy, “Funnel Cavities for 4-MW Upgrade of Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA84, pp. 3588-3590.
- M. M. Peng et al., “Optimization of a Single-Cell Accelerating Structure for Rf Breakdown Test With Short Rf Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 747-750.
- D. Sun et al., “Microwave Quality Assurance Effort for R&D on the Next Linear Collider at Fermilab”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH307, pp. 1198-1200.
- G. H. Rees, “Overview of Future Spallation Neutron Sources”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3731-3736.
- T. Asaka et al., “Adaptive 3-D UV-laser Pulse Shaping System to Minimize Emittance for Photocathode RF Gun”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEBAU01, pp. 298-305.
- M. Fouaidy, B. Aune, R. Brizzi, J. Gratadour, M. Juillard, and T. Junquera, “Thermal Model Calculations in Superconducting RF Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1304-1307.
- X. N. Gavald?á, A. D?¡az Ortiz, and L. S. Nadolski, “Multi-objective Optimization of the Linear and Non-linear Beam Dynamics of Synchrotron SOLEIL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 388-390.
- M. B??scher et al., “Polarized Proton Beams From Laser-Induced Plasmas”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 46-51.
- H. Ghasem, J. Alabau-Gonzalvo, F. Antoniou, S. Papadopoulou, and Y. Papaphilippou, “NONLINEAR OPTIMIZATION OF CLIC DRS NEW DESIGN WITH VARIABLE BENDS AND HIGH FIELD WIGGLERS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2416-2419.
- I. Martini et al., “Surface Characterization at CERN of Photocathodes for Photoinjector Applications”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1703-1705.
- S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 706-709.
- M. Omet, A. Kuramoto, H. Hayano, T. Matsumoto, and S. Michizono, “Development and Test of a Fully Automated PkQl Control Procedure at KEK STF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME013, pp. 2950-2952.
- Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142.
- J. Bahrdt, B. Faatz, V. Miltchev, R. Reininger, and R. Treusch, “The Properties of the FEL Output for Different Seeding Schemes”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH050, pp. 150-153.
- L. Serafini, C. Pagani, A. Peretti, and M. Zanin, “Self-Consistent PIC Simulations of Beam-Cavity Interactions Using Rician Sub-Beams”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-66, pp. 796-798.
- P. Dhara, P. Maity, A. Roy, P. S. Roy, and P. Singhai, “Design of the Data Acquisition System for the Nuclear Physics Experiments at VECC”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCC01, pp. 268-270.
- A. Alekou, Y. Papaphilippou, and D. Spitzbart, “High-Power Proton-Synchrotron Collimation Studies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 879-881.
- H. Kim et al., “RF preparation of QWR cavities for beam commissioning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA166, pp. 3033-3035.
- T. H. Johnson et al., “The University of Maryland Isochronous Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 438-442.
- A. Canabal et al., “Full Real-time Temperature Mapping System for 9-cell ILC-type Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP121, pp. 841-843.
Back to search