JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Bulyak et al., “The Project of a Multifunctional Accelerator - Storage Ring Complex”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11A, pp. 403-405. 
[n]	J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923. 
[n]	V. Sharma, S. Acharya, and K. C. Mittal, “Machine Throughput Improvement Achieved Using Innovative Control Technique”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD04, pp. 144-144. 
[n]	H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 245-252. doi:10.18429/JACoW-ICALEPCS2017-TUCPA01
[n]	A. Vergara-Fernandez et al., “The ITER Interlock System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA02, pp. 910-913. 
[n]	D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321. 
[n]	E. D. Matias, “A Rational Approach to Control System Development Projects That Incorporates Risk Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOBAB05, pp. 513-516. 
[n]	H. Shang, G. Decker, L. Emery, W. E. Norum, and R. Soliday, “Application Software for the BSP-100 Beam Position Monitor at the APS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP036, pp. 167-169. 
[n]	K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928. 
[n]	M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89. 
[n]	J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285. 
[n]	K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85. 
[n]	T. Oulevey et al., “An Update on the CERN Journey from Bare Metal to Orchestrated Containerization for Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1138-1144. doi:10.18429/JACoW-ICALEPCS2023-TH2AO03
[n]	J. Haimson, B. A. Ishii, B. L. Mecklenburg, and G. A. Stowell, “A Solid State Driven, Parasitic Oscillation Suppressed, 17 GHz High Gain TW Klystron for Stable Operation with High Gradient Linac Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS084, pp. 2529-2531. 
[n]	L. Emery, G. I. Fystro, H. Shang, and M. L. Smith, “Beamline-Controlled Steering of Source-Point Angle at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 887-889. doi:10.18429/JACoW-NAPAC2016-WEPOB04
[n]	W. C. Turner, J. K. Boyd, J. C. Clark, and W. E. Nexsen, “Status of the ETA-II Linear Induction Accelerator:  High Brightness Results”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 996-999. 
[n]	Y. Torun et al., “Installation and Commissioning of the MICE RF Module Prototype”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3395-3397. doi:10.18429/JACoW-IPAC2015-WEPTY055
[n]	S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197. 
[n]	B. Autin, G. Carron, F. Caspers, S. Milner, L. Thorndahl, and S. van der Meer, “ACOL Stochastic Cooling Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1549-1552. 
[n]	M. Watanabe et al., “A Broad-Band RF Cavity Using Finemet Cut Cores as a Buncher of Ion Beams”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16026, pp. XX-XX. 
[n]	J. Ma et al., “Reducing background/noise in stretched wire alignment technique measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3345-3347. doi:10.18429/JACoW-IPAC2024-THPG38
[n]	M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2694-2696. doi:10.18429/JACoW-IPAC2017-WEPAB050
[n]	S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3097-3100. 
[n]	P. P. Goryl, A. I. Wawrzyniak, M. Sj?Âstr?Âm, and T. Szymocha, “An Implementation of the Virtual Accelerator in the Tango Control System”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOSBC3, pp. 23-25. 
[n]	J. P. Gourber, H. G. Hereward, and S. Myers, “Overlap Knock-Out Effects in the Cern Intersecting Storage Rings (ISR)”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1405-1408. 
[n]	A. T. Cravatta et al., “LCLS-II-HE Cryomodule Testing at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 721-723. doi:10.18429/JACoW-LINAC2022-THPOJO12
[n]	Yu. G. Alenitsky, “Isochronous Cyclotrons for Thermonuclear Reactors Driving”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08B, pp. 2395-2397. 
[n]	R. H. Iverson, F.-J. Decker, D. Schultz, C. Spencer, J. Turner, and U. Wienands, “LER Injection Line B2/B4 Study”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA75, pp. 1252-1254. 
[n]	J. A. Clarke et al., “Status of the UK Superconducting Planar Undulator Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA062, pp. 2259-2261. 
[n]	D. Reggiani, “Extraction, Transport and Collimation of the PSI 1.3 MW Proton Beam”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A03, pp. 373-377. 
[n]	A. Hofmann et al., “The ISR Impedance Between 40 kHz and 40 GHz”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2212-2215. 
[n]	D. Passarelli, “SSR1 Tuner Mechanism: Passive and Active Device”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP052, pp. 541-543. 
[n]	M. L. Neubauer, A. Dudas, and A. Krasnykh, “S-Band Load Design for SLAC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO18, pp. 975-977. 
[n]	A. H. Botha et al., “Operation and Development of the NAC Accelerator Facilities”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-01, pp. 80-83. 
[n]	P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 933-938. 
[n]	C. Garino et al., “Intervention Management from Operation to Shutdown”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA035, pp. 3705-3707. 
[n]	C. Leemann, “CEBAF Design Overview and Project Status”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A09, pp. XX-XX. 
[n]	P. D. Quinn, “Status Report on Operation of the Daresbury SRS after Recent Additions and Upgrades”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 591-594. 
[n]	M. G. Minty, R. D?Âlling, N. V. Mokhov, and T. Toyama, “Summary from Working Group F: Instrumentation and Beam Material Interactions”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper FRO2AU02, pp. 453-460. 
[n]	A. Geisler, “STATUS REPORT OF THE ACCEL 250 MEV MEDICAL CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18A3, pp. XX-XX. 
[n]	A. Oppelt et al., “Tuning, Conditioning, and Dark Current Measurements of a New Gun Cavity at PITZ”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH023, pp. 609-612. 
[n]	F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 374-377. doi:10.18429/JACoW-ICALEPCS2015-MOPGF125
[n]	J. A. Avila-Abellan et al., “Em# Electrometer Comes to Light”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 137-142. doi:10.18429/JACoW-ICALEPCS2017-TUAPL04
[n]	J. T. G. Wilson, “A Real-Time Data Logger for the MICE Superconducting Magnets”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO012, pp. 182-184. 
[n]	B. Dwersteg, D. Kostin, M. Lalayan, C. Martens, and W.-D. M?Âller, “TESLA RF Power Couplers Development at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT001, pp. XX-XX. 
[n]	A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX. 
[n]	G. C. Harper and D. W. Storm, “A Beat Frequency Buncher”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A29, pp. 261-264. 
[n]	H. Jiang et al., “Macroparticle Simulation Studies of a Beam-core Matching Experiment”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO042, pp. 3860-3862. 
[n]	M. Meng, Y. B. Chen, J. H. Wang, Y. L. Yang, and Z. R. Zhou, “Control and Analysis System for Digital Feedback in HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE031, pp. 1038-1040. 
[n]	J. Bahrdt, A. Gaupp, G. Ingold, M. Scheer, and G. Wuestefeld, “A Double Undulator for the Production of Circularly Polarized Light at BESSY II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP003G, pp. 2538-2540. 
[n]	C. L Hammer, R. O. Haxby, and R. Tucker, “Slow Extraction from FFAG Accelerators”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 702-705. 
[n]	B. D. Hartsell, M. R. Campbell, P. Hurh, M. D. Fitton, T. Ishida, and T. Nakadaira, “Design of a Compact Fatigue Tester for Testing Irradiated Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3321-3323. doi:10.18429/JACoW-IPAC2015-WEPTY026
[n]	V. Sharma, S. Acharya, S. Gond, K. C. Mittal, and R. N. Rajan, “PLC Controlled Search & Secure Safety Interlock System for Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD03, pp. 142-143. 
[n]	A. S. Gurevich, E. A. Myae, V. G. Tishin, and E. F. Troyanov, “Upgrading 70 GeV IHEP Accelerator as UNK Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 415-417. 
[n]	M. Battiaz, M. Harold, G. Suberlucq, and H. H. Umstuetter, “A Strong Focusing Bending Magnet for the CERN  Antiproton Collector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1532-1535. 
[n]	D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775. 
[n]	N. Leclercq et al., “Flyscan: a Fast and Multi-technique Data Acquisition Platform for the SOLEIL Beamlines”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 826-829. doi:10.18429/JACoW-ICALEPCS2015-WEPGF056
[n]	D. M. Dykes, S. F. Hill, C. W. Horrabin, and Y. S. Kim, “A Low Power RF System for the PLS Cavity Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1945-1948. 
[n]	S. Jensen et al., “SIP4C/C++ at CERN - Status and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 785-788. doi:10.18429/JACoW-ICALEPCS2017-TUPHA161
[n]	M. Checchin, A. Grassellino, M. Martinello, S. Posen, A. Romanenko, and J. Zasadzinski, “Enhancement of the Accelerating Gradient in Superconducting Microwave Resonators”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 113-116. doi:10.18429/JACoW-NAPAC2016-MOPOB20
[n]	Yu. N. Denisov et al., “Beam Diagnostics Devices at the JINR Phasotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I5-06, pp. 461-464. 
[n]	H. Gassot, “Mechanical Stability of the RF Superconducting Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO039, pp. 2235-2237. 
[n]	K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n]	K. Turaj et al., “Degradation and Recovery of the LHC RF Cryomodule Performance Using the Helium Processing Technique”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 746. doi:10.18429/JACoW-SRF2021-THPFAV006
[n]	A. Y. Molodozhentsev, A. Ando, T. Koseki, and M. Tomizawa, “Effects of the Field Leakage of the Slow Extraction Septum Magnets of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE068, pp. 4674-4676. 
[n]	F. Di Maio et al., “The CODAC Software Distribution for the ITER Plant Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKS029, pp. 227-230. 
[n]	J. Cherix, M. Maerki, H. R. Fitze, H. Frei, and P. K. Sigg, “Development of High Power Gridded Tube CW RF Systems with Excellent Reliability and Maintainability”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL2, pp. 418-422. 
[n]	C. Iselin, J. P. Koutchouk, Y. Marti, and J. Poole, “Implementation of the LEP Optics Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1509-1512. 
[n]	W. Urbanus et al., “Simultaneous Transport of N+ and N+2 Beams through a F0D0 Channel”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-46, pp. 161-163. 
[n]	N. Milleron and R. Wolgast, “Cryopumping the Omnitron Ultra-Vacuum System Using Heat-Pipes" and Metallic Conductors"”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 941-945. 
[n]	W. Diete, B. Griep, M. Peiniger, P. vom Stein, H. Vogel, and W. Braeutigam, “A Superconducting Accelerating Test Module for the European Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP124, pp. 957-958. 
[n]	S. Tomin, W. Decking, N. Golubeva, A. I. Novokshonov, T. Wohlenberg, and I. Zagorodnov, “Longitudinal Phase Space Diagnostics with Corrugated Structure at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 275-278. doi:10.18429/JACoW-IPAC2022-MOPOPT020
[n]	S. Bousson, M. Fouaidy, H. Gassot, T. Junquera, J.-C. Le Scornet, and J. Lesrel, “SRF Cavity Stiffening by Thermal Spraying”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B15, pp. 2043-2045. 
[n]	P. Anger et al., “Beam Diagnostics for SPIRAL2 RNB Facility”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD30, pp. 116-118. 
[n]	R. D?Âlling, “Investigation of Space-Charge Compensation with Residual-Gas-Ion Energy Analyser”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP15, pp. 83-85. 
[n]	S. Kulkarni, P. V. Bhagwat, J. A. Gore, A. K. Gupta, and S. Kailas, “Graphical User Interface (GUI) for Testing CAMAC modules”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD27, pp. 60-61. 
[n]	R. Thomae et al., “Measurements on the LANSCE Upgrade H--Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA15, pp. 1917-1919. 
[n]	L. F. Li and C. H. Wang, “A Web Based Realtime Monitor on EPICS Data”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN014, pp. 121-123. 
[n]	R. D?Âlling, N. Hayashi, and V. E. Scarpine, “Qinclosing Plenary Summary of Working Group E:Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper FRO1B02, pp. 625-626. 
[n]	V. Bondar et al., “Beam Position Feedback System Supported by Karabo at European XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 280. doi:10.18429/JACoW-ICALEPCS2019-MOPHA040
[n]	T. Szymocha et al., “SOLARIS Digital User Office”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 873-875. doi:10.18429/JACoW-ICALEPCS2017-TUPHA188
[n]	F. J. Cullinan, S. T. Boogert, N. Y. Joshi, and A. Lyapin, “Calibration Errors in the Cavity Beam Position Monitor System at the ATF2”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC025, pp. 1051-1053. 
[n]	N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268. 
[n]	C. Yao, K. C. Harkay, H. Shang, and C.-X. Wang, “Measurement of Coherent Damping Rate of the APS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR084, pp. 3126-3128. 
[n]	G. Martinsen, S. Acharya, M. Allen, E. Faught, K. Low, and J. Sage, “Initial Control of the H-Ion Source at the Superconducting Super Collider Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1365-1368. 
[n]	J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273. 
[n]	S. Rastigeev et al., “First Radiocarbon Measurements at BINP AMS”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHZ01, pp. 309-312. 
[n]	A. Noda et al., “Ion Production with a High-power Short-pulse Laser for Application to Cancer Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI096, pp. 2748-2750. 
[n]	R. Kowalewicz et al., “Beam Test with the CERN Plasma Lens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1539-1542. 
[n]	J. Dedic, G. Jansa, M. Plesko, and R. Sabjan, “Uniform Motion Control Solution for Variety of Motion Applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP002, pp. 1526-1528. 
[n]	I. Saleh, A. A. Abbadi, A. Al-Dalleh, and A. Ismail, “Design and Implementation of SESAME's Storage Ring Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1498-1501. doi:10.18429/JACoW-ICALEPCS2017-THPHA059
[n]	E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359. 
[n]	A. H. Regan, P. Balleyguier, and C. D. Ziomek, “LEDA LLRF Control System Characterization”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4075, pp. 944-946. 
[n]	N. Ghazaryan, M. E. Castro Carballo, and W. Decking, “Orbit and Dispersion Tool at European XFEL Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3932-3934. doi:10.18429/JACoW-IPAC2017-THPAB092
[n]	M. Williams et al., “Design of Ion Source for LANSCE Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA16, pp. 1920-1922. 
[n]	A. Santamar?¡a Garc?¡a et al., “Limits on Failure Scenarios for Crab Cavities in the HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3923-3926. doi:10.18429/JACoW-IPAC2015-THPF095

For LaTeX

Use Complete Form

For BibTeX

References

Back to search