Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
[n] R. Xiang, D. Janssen, P. Michel, K. Moeller, F. Staufenbiel, and J. Teichert, “Low Emittance Polarized Electron Source Based on Superconducting RF Gun”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP66, pp. XX-XX.
[n] J. A. Safranek, W. X. Cheng, W. J. Corbett, X. Huang, and J. J. Sebek, “Optimization of the Booster to SPEAR Transport Line for Top-Off Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP043, pp. 1641-1643.
[n] A. T. Cravatta et al., “LCLS-II-HE Cryomodule Testing at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 721-723. doi:10.18429/JACoW-LINAC2022-THPOJO12
[n] S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 112-114. doi:10.18429/JACoW-LINAC2018-MOPO039
[n] C. Youngman, B. Fernandes, P. Gessler, J. Coughlan, E. Motuk, and M. Zimmer, “Electronics Developments for High Speed Data Throughput and Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC086, pp. 778-781.
[n] M.-E. Couprie et al., “Control of Laser Plasma Accelerated Electrons: A Route for Compact Free Electron Lasers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2280-2285. doi:10.18429/JACoW-IPAC2019-WEZPLS1
[n] C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2669-2671. doi:10.18429/JACoW-IPAC2014-WEPRI076
[n] P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
[n] J. Jaeger, M. Lee, R. Servranckx, and H. Shoaee, “GIANT- A Computer Code for General Interactive Analysis of Trajectories”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1877-1880.
[n] Y. M. Zhou, B. Gao, Y. B. Leng, and N. Zhang, “Injection Transient Study Using 6-Dimensional Bunch-by-bunch Diagnostic System at SSRF”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 542-547. doi:10.18429/JACoW-IBIC2018-THOB01
[n] A. Kovach, J. Grillenberger, A. S. Parfenova, and M. Seidel, “Energy Efficiency and Saving Potential Analysis of the High Intensity Proton Accelerator HIPA at PSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2399-2402. doi:10.18429/JACoW-IPAC2017-TUPVA129
[n] J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Improved Winding of Superconducting Undulator and Measurement of Quenching Tolerance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC114, pp. 2270-2272.
[n] R. Maier and U. Pfister, “COSY-J??lich - A Synchrotron and Storage Ring for Medium Energy Physics”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-03, pp. 282-285.
[n] M. BastaniNejad et al., “Studies of Breakdown in a Pressurized RF Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP080, pp. 736-738.
[n] R. J. Burke, “Telescoping Beams for Heavy Ion Fusion”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3092-3095.
[n] R. Pico, R. Bork, W. Diamond, and J. Fugitt, “Thermionic Gun Control System for the CEBAF Injector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-39, pp. 409-411.
[n] D. Boukhelef, J. Szuba, K. Wrona, and C. Youngman, “Software Development for High Speed Data Recording and Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC045, pp. 665-668.
[n] W. Fu, K. A. Brown, T. D'Ottavio, P. S. Dyer, and S. Nemesure, “Accelerator Control Data Mining with WEKA”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 292. doi:10.18429/JACoW-ICALEPCS2019-MOPHA043
[n] Q. S. Chen et al., “Focusing Magnetic Field Design for a FEL Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO034, pp. 1949-1951.
[n] S. G. Schubert et al., “CsK2Sb Growth Studies: Towards High Quantum Efficiency and Smooth Surfaces”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2566-2568. doi:10.18429/JACoW-IPAC2015-WEPWA032
[n] C. Nieter, P. J. Mullowney, S. Ovtchinnikov, D. S. Smithe, and P. Stoltz, “Self-Consistent Simulations of Multipacting in Superconducting Radio Frequencies”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAAB01, pp. 769-771.
[n] V. Stipp, “The ANL 50 MeV H- Injector - 35 year anniversary”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP11, pp. 74-76.
[n] D. M. Zhou and K. Ohmi, “Interference of CSR Fields in a Curved Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS007, pp. 604-606.
[n] R. Kwee-Hinzmann, S. M. Gibson, R. Bruce, F. Cerutti, L. S. Esposito, and A. Lechner, “Beam Induced Background Simulation Studies at IR1 with New High Luminosity LHC Layout”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2184-2187. doi:10.18429/JACoW-IPAC2015-TUPTY067
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, J. Gomez, D. Gutierrez Arribas, and F. Toral, “Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO022, pp. 930-932.
[n] C. Emma, C. Pellegrini, M. W. Guetg, A. A. Lutman, A. Marinelli, and J. Wu, “High Efficiency, High Brightness X-ray Free Electron Lasers via Fresh Bunch Self-Seeding”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 805-808. doi:10.18429/JACoW-IPAC2016-MOPOW040
[n] J. W. Glenn et al., “AGS Fast Spin Resonance Jump, Magnets and Power Supplies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP066, pp. 1699-1701.
[n] W. Schnell, “Report on the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1358-1363.
[n] M. A. Green et al., “The Integration of Liquid and Solid Muon Absorbers into a Focusing Magnet of a Muon Cooling Channel”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG013, pp. 1834-1836.
[n] Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1123-1125. doi:10.18429/JACoW-IPAC2018-TUPAL050
[n] R. L. Sheffield, C. W. Barnes, M. A. Bourke, R. W. Garnett, M. S. Gulley, and A. J. Taylor, “Pre-Conceptual Design Requirements for an X-Ray Free Electron Laser for the MaRIE Experimental Facility at LANL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP163, pp. 2417-2419.
[n] N. D. Arnold, G. J. Nawrocki, S. J. Benes, M. G. Hoffberg, and J. R. Winans, “An I/O Subnet for the APS Control System: The BITBUS Universal Gateway”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1957-1960.
[n] L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1712-1714. doi:10.18429/JACoW-IPAC2018-TUPML073
[n] G. Blume et al., “A Compton transmission polarimeter for DC and SRF electron photo-injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3959-3961. doi:10.18429/JACoW-IPAC2023-THPA004
[n] D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
[n] E. P. Colton, “Slow Extraction at the SSC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2442-2444.
[n] M. Pekeler, S. Bauer, B. Griep, M. Knaak, H. P. Vogel, and P. vom Stein, “Production of Superconducting Accelerator Modules for High Current Electron Storage Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT041, pp. 638-640.
[n] M. A. Drury et al., “Current Results From Acceptance Testing of LCLS-II Cryomodules at Jefferson Lab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1007-1010. doi:10.18429/JACoW-SRF2019-THP056
[n] D. Kassner, “Mechanical Design of ISABELLE Magnet Cryostats”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1260-1263.
[n] P. Bricault, “A 500 MeV-100µA Proton Target for the ISAC Radioactive Ion Beam Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR4, pp. 100-102.
[n] M. Hernandez, H. Deruyter, A. V. Mishin, A. J. Saverskiy, D. Skowbo, and R. R. Smith, “A 7MeV S-Band 2998MHz Variable Pulse Length Linear Accelerator System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP025, pp. 1895-1897.
[n] E. B. Blum et al., “A Superconducting Wiggler Magnet for the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P020, pp. 3494-3496.
[n] R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, G. Stinson, R. Worsham, and M. Zach, “Progress Towards H- Extraction at Triumf”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 559-562.
[n] A. I. Sukhanov et al., “Upgrade of the Fermilab Spoke Test Cryostat for Testing of PIP-II 650 MHz 5-Cell Elliptical Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1124-1128. doi:10.18429/JACoW-SRF2019-THP091
[n] N. N. Alexeev et al., “Investigation of the Nonlinear Transformation of an Ion Beam in the Plasma Lens”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC074, pp. 2190-2192.
[n] C. D. Striffler and S. Y. Cai, “One-Dimensional Simulation Studies of Breakdown and Electron Beam Generation Processes for a Hollow Cathode Pseudospark Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3075-3078.
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] D. Reid, “On the Horizon: New RF Power Sources for Linear Accelerators”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-03, pp. 514-518.
[n] N. Simos, L. Berman, A. J. Broadbent, K. Evans-Lutterodt, M. Fallier, and J. Hill, “Achieving Stability Requirements for Nanoprobe and Long Beam Lines at NSLS II. A Comprehensive Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC052, pp. 2109-2111.
[n] S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 179-181. doi:10.18429/JACoW-IBIC2017-TUPCC13
[n] N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3770-3773. doi:10.18429/JACoW-IPAC2017-THPAB032
[n] F. A. Samman, M. Glesner, C. Spies, and S. Surapong, “Floating-point-based Hardware Accelerator of a Beam Phase-Magnitude Detector and Filter for a Beam Phase Control System in a Heavy-Ion Synchrotron Application”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU001, pp. 683-686.
[n] C. Mi et al., “RHIC 12x150A Current Lead Temperature Controller: Design and Implementation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP060, pp. 2238-2240.
[n] S. Bartalucci et al., “Impedance and Beam Dynamics in DAPhiNE”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 804-807.
For LaTeX
Use Complete Form
For BibTeX
References
- W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THYLA001, pp. 114-118.
- R. Xiang, D. Janssen, P. Michel, K. Moeller, F. Staufenbiel, and J. Teichert, “Low Emittance Polarized Electron Source Based on Superconducting RF Gun”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP66, pp. XX-XX.
- J. A. Safranek, W. X. Cheng, W. J. Corbett, X. Huang, and J. J. Sebek, “Optimization of the Booster to SPEAR Transport Line for Top-Off Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP043, pp. 1641-1643.
- A. T. Cravatta et al., “LCLS-II-HE Cryomodule Testing at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 721-723.
- S. Pfeiffer et al., “Status Update of the Fast Energy Corrector Cavity at FLASH”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 112-114.
- C. Youngman, B. Fernandes, P. Gessler, J. Coughlan, E. Motuk, and M. Zimmer, “Electronics Developments for High Speed Data Throughput and Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC086, pp. 778-781.
- M.-E. Couprie et al., “Control of Laser Plasma Accelerated Electrons: A Route for Compact Free Electron Lasers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2280-2285.
- C. S. Hopper and J. R. Delayen, “Higher Order Mode Damping in Superconducting Spoke Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2669-2671.
- P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443.
- J. Jaeger, M. Lee, R. Servranckx, and H. Shoaee, “GIANT- A Computer Code for General Interactive Analysis of Trajectories”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1877-1880.
- Y. M. Zhou, B. Gao, Y. B. Leng, and N. Zhang, “Injection Transient Study Using 6-Dimensional Bunch-by-bunch Diagnostic System at SSRF”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 542-547.
- A. Kovach, J. Grillenberger, A. S. Parfenova, and M. Seidel, “Energy Efficiency and Saving Potential Analysis of the High Intensity Proton Accelerator HIPA at PSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2399-2402.
- J. C. Jan, C.-H. Chang, C.-S. Hwang, and F.-Y. Lin, “Improved Winding of Superconducting Undulator and Measurement of Quenching Tolerance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC114, pp. 2270-2272.
- R. Maier and U. Pfister, “COSY-J??lich - A Synchrotron and Storage Ring for Medium Energy Physics”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-03, pp. 282-285.
- M. BastaniNejad et al., “Studies of Breakdown in a Pressurized RF Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP080, pp. 736-738.
- R. J. Burke, “Telescoping Beams for Heavy Ion Fusion”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3092-3095.
- R. Pico, R. Bork, W. Diamond, and J. Fugitt, “Thermionic Gun Control System for the CEBAF Injector”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-39, pp. 409-411.
- D. Boukhelef, J. Szuba, K. Wrona, and C. Youngman, “Software Development for High Speed Data Recording and Processing”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC045, pp. 665-668.
- W. Fu, K. A. Brown, T. D'Ottavio, P. S. Dyer, and S. Nemesure, “Accelerator Control Data Mining with WEKA”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 292.
- Q. S. Chen et al., “Focusing Magnetic Field Design for a FEL Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO034, pp. 1949-1951.
- S. G. Schubert et al., “CsK2Sb Growth Studies: Towards High Quantum Efficiency and Smooth Surfaces”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2566-2568.
- C. Nieter, P. J. Mullowney, S. Ovtchinnikov, D. S. Smithe, and P. Stoltz, “Self-Consistent Simulations of Multipacting in Superconducting Radio Frequencies”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAAB01, pp. 769-771.
- V. Stipp, “The ANL 50 MeV H- Injector - 35 year anniversary”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP11, pp. 74-76.
- D. M. Zhou and K. Ohmi, “Interference of CSR Fields in a Curved Waveguide”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS007, pp. 604-606.
- R. Kwee-Hinzmann, S. M. Gibson, R. Bruce, F. Cerutti, L. S. Esposito, and A. Lechner, “Beam Induced Background Simulation Studies at IR1 with New High Luminosity LHC Layout”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2184-2187.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, J. Gomez, D. Gutierrez Arribas, and F. Toral, “Design and Manufacturing Description of the Prototype Striplines for the Extraction Kicker of the CLIC Damping Rings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO022, pp. 930-932.
- C. Emma, C. Pellegrini, M. W. Guetg, A. A. Lutman, A. Marinelli, and J. Wu, “High Efficiency, High Brightness X-ray Free Electron Lasers via Fresh Bunch Self-Seeding”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 805-808.
- J. W. Glenn et al., “AGS Fast Spin Resonance Jump, Magnets and Power Supplies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP066, pp. 1699-1701.
- W. Schnell, “Report on the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1358-1363.
- M. A. Green et al., “The Integration of Liquid and Solid Muon Absorbers into a Focusing Magnet of a Muon Cooling Channel”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG013, pp. 1834-1836.
- Q. Fu et al., “Progress Work on a CW Deuteron RFQ with Magnetic Coupling Windows”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1123-1125.
- R. L. Sheffield, C. W. Barnes, M. A. Bourke, R. W. Garnett, M. S. Gulley, and A. J. Taylor, “Pre-Conceptual Design Requirements for an X-Ray Free Electron Laser for the MaRIE Experimental Facility at LANL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP163, pp. 2417-2419.
- N. D. Arnold, G. J. Nawrocki, S. J. Benes, M. G. Hoffberg, and J. R. Winans, “An I/O Subnet for the APS Control System: The BITBUS Universal Gateway”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1957-1960.
- L. Celona et al., “Ion Source and Low Energy Beam Transport Line Final Commissioning Step and Transfer from INFN to ESS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1712-1714.
- G. Blume et al., “A Compton transmission polarimeter for DC and SRF electron photo-injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA004, pp. 3959-3961.
- D. Gorelov, T. L. Grimm, S. U. De Silva, and J. R. Delayen, “Engineering of a Superconducting 400 MHz Crabbing Cavity for the LHC HiLumi Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC085, pp. 2411-2413.
- E. P. Colton, “Slow Extraction at the SSC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2442-2444.
- M. Pekeler, S. Bauer, B. Griep, M. Knaak, H. P. Vogel, and P. vom Stein, “Production of Superconducting Accelerator Modules for High Current Electron Storage Rings”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT041, pp. 638-640.
- M. A. Drury et al., “Current Results From Acceptance Testing of LCLS-II Cryomodules at Jefferson Lab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1007-1010.
- D. Kassner, “Mechanical Design of ISABELLE Magnet Cryostats”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1260-1263.
- P. Bricault, “A 500 MeV-100µA Proton Target for the ISAC Radioactive Ion Beam Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODR4, pp. 100-102.
- M. Hernandez, H. Deruyter, A. V. Mishin, A. J. Saverskiy, D. Skowbo, and R. R. Smith, “A 7MeV S-Band 2998MHz Variable Pulse Length Linear Accelerator System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP025, pp. 1895-1897.
- E. B. Blum et al., “A Superconducting Wiggler Magnet for the NSLS X-Ray Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P020, pp. 3494-3496.
- R. E. Laxdal, G. H. Mackenzie, J. B. Pearson, G. Stinson, R. Worsham, and M. Zach, “Progress Towards H- Extraction at Triumf”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 559-562.
- A. I. Sukhanov et al., “Upgrade of the Fermilab Spoke Test Cryostat for Testing of PIP-II 650 MHz 5-Cell Elliptical Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1124-1128.
- N. N. Alexeev et al., “Investigation of the Nonlinear Transformation of an Ion Beam in the Plasma Lens”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC074, pp. 2190-2192.
- C. D. Striffler and S. Y. Cai, “One-Dimensional Simulation Studies of Breakdown and Electron Beam Generation Processes for a Hollow Cathode Pseudospark Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3075-3078.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- D. Reid, “On the Horizon: New RF Power Sources for Linear Accelerators”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH2-03, pp. 514-518.
- N. Simos, L. Berman, A. J. Broadbent, K. Evans-Lutterodt, M. Fallier, and J. Hill, “Achieving Stability Requirements for Nanoprobe and Long Beam Lines at NSLS II. A Comprehensive Study”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC052, pp. 2109-2111.
- S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 179-181.
- N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3770-3773.
- F. A. Samman, M. Glesner, C. Spies, and S. Surapong, “Floating-point-based Hardware Accelerator of a Beam Phase-Magnitude Detector and Filter for a Beam Phase Control System in a Heavy-Ion Synchrotron Application”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU001, pp. 683-686.
- C. Mi et al., “RHIC 12x150A Current Lead Temperature Controller: Design and Implementation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP060, pp. 2238-2240.
- S. Bartalucci et al., “Impedance and Beam Dynamics in DAPhiNE”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 804-807.
Back to search