JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	G. D'Auria et al., “The X-band System for the FERMI@ELETTRA FEL Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE015, pp. 2173-2175. 
[n]	G. Penacoba Fernandez et al., “Design of an FPGA-based Radiation Tolerant Agent for WorldFIP Fieldbus”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS102, pp. 1780-1782. 
[n]	T. Biallas et al., “Experimental Results from an Injector for an IR FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29F, pp. 1447-1449. 
[n]	R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448. 
[n]	U. Scheeler et al., “Recommissioning of the Marburg Ion-beam Therapy Centre (MIT) Accelerator Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1908-1910. doi:10.18429/JACoW-IPAC2016-TUPOY004
[n]	R. Li, C. L. Guo, M. M. Huang, and T. J. Shen, “Operation Status of SSRF Power Supplies and Interlocks for Top-up Operation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO007, pp. 3349-3351. 
[n]	W. Kutschera, “Accelerator Mass Spectrometry at VERA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEYF101, pp. 245-252. 
[n]	D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817. 
[n]	E. Van der Bij et al., “Open Hardware for CERN's Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT04, pp. 554-557. 
[n]	F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820. 
[n]	R. Tomas, S. D. Fartoukh, and J. Serrano, “Reliable Operation of the AC Dipole in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP026, pp. 2575-2577. 
[n]	D. Regidor et al., “IFMIF-EVEDA SRF Linac Couplers Test Bench”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO043, pp. 2396-2398. 
[n]	B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 524-527. 
[n]	M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88. 
[n]	R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126. 
[n]	K. R. Crandall, R. H. Stokes, and T. P. Wangler, “RF Quadrupole Beam Dynamics Design Studies”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-1, pp. 205-216. 
[n]	Z. S. Zhou et al., “CEPC 650 MHz Klystron Development”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3891-3894. doi:10.18429/JACoW-IPAC2016-THPOR046
[n]	K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150. 
[n]	O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879. 
[n]	M. Libkind, L. Bertolini, P. Duffy, R. Carr, G. Rakowsky, and J. Skaritka, “Mechanical Design of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP93, pp. 2477-2479. 
[n]	K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n]	E. S. Fischer, A. Bleile, V. I. Datskov, V. Marusov, J. P. Meier, and P. J. Spiller, “Start of the Series Production for the Cryogenic Magnet Corrector Modules of FAIR”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4124-4127. doi:10.18429/JACoW-IPAC2019-THPTS010
[n]	S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747. 
[n]	S. Wang, R. Li, R. A. Rimmer, H. Wang, and Y. Zhang, “Rf System Requirements for JLab's MEIC Collider Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO077, pp. 2477-2479. 
[n]	J. Serrano, “Digital Signal Processing Using Field Programmable Gate Arrays”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper THTTT01, pp. 346-355. 
[n]	J. K. Sekutowicz, W. C. Grabowski, R. Nietubyc, and T. Wasiewicz, “Shape Optimization of a SRF Injector Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO007, pp. 2322-2324. 
[n]	S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “An H-Mode Accelerator with PMQ Focusing as a LANSCE DTL Replacement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS067, pp. 2655-2657. 
[n]	D. J. Newsham, S. A. Bogacz, Y.-C. Chao, Y. S. Derbenev, R. P. Johnson, and R. Sah, “Simulations of Parametric-resonance Ionization Cooling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN094, pp. 2927-2929. 
[n]	R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180. 
[n]	W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596. 
[n]	A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105. 
[n]	C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n]	J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567. 
[n]	A. Y. Murokh et al., “Inverse Compton Scattering Experiment in a Bunch Train Regime Using Nonlinear Optical Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB008, pp. 3245-3247. 
[n]	P. A. Elkiaer et al., “Slow Kicker Magnet System with Energy Recover Pulse Power Supply with Extended Flat Top”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN004, pp. 1395-1397. 
[n]	L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n]	A. V. Aleksandrov et al., “Status of New 2.5 MeV Test Facility at SNS”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP108, pp. 1105-1107. 
[n]	S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n]	K. Beard, L. Merminga, and B. Yunn, “Tools to Predict Beam Breakup in Recirculating Linacs”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPD006, pp. 332-334. 
[n]	Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556. 
[n]	M. G. Mazarakis et al., “Acceleration, Ion Focusing (IFR) and Transport Experiments with Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-03, pp. 299-301. 
[n]	S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n]	S. A. Bogacz, K. B. Beard, and R. P. Johnson, “Recirculating Linear Accelerators for Future Muon Facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOAMH01, pp. 3602-3604. 
[n]	P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115. 
[n]	Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550. 
[n]	S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122. 
[n]	O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n]	L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n]	T. P. Wangler, “Lumped-Circuit Model of Four-Vane RFQ Resonator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0005, pp. 332-334. 
[n]	T. P. Wangler, F. W. Guy, and I. Hofmann, “The Influence of Equipartitioning on the Emittance of Intense Charged-Particle Beams”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-36, pp. 340-345. 
[n]	H. Bluem et al., “Electron Gun and Injector Designs for State-of-the-Art FELs”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP054, pp. XX-XX. 
[n]	S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442. 
[n]	E. S. Fischer et al., “From Design Towards Series - The Superconducting Magnets for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1167-1170. doi:10.18429/JACoW-IPAC2016-TUPMB031
[n]	W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3901-3904. doi:10.18429/JACoW-IPAC2015-THPF089
[n]	A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX. 
[n]	J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n]	C.-Y. Tsai, D. Douglas, R. Li, and C. Tennant, “CSR Induced Microbunching Gain Estimation including Transient Effects in Transport and Recirculation Arcs”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 596-599. doi:10.18429/JACoW-IPAC2015-MOPMA025
[n]	P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272. 
[n]	S. A. Bogacz, “PERLE - Beam Optics Design”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 49-51. doi:10.18429/JACoW-ERL2017-TUIDCC001
[n]	S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n]	T. Hughes and H. Davis, “Effect of Stimulated and Thermal Desorption in DARHT-2”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA006, pp. 120-122. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search