JaCoW Logo

Reference Search

Favourites


For Word

[n]	V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 115-117. doi:10.18429/JACoW-IPAC2018-MOPMF016
[n]	O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4034-4036. doi:10.18429/JACoW-IPAC2021-THPAB141
[n]	M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished. 
[n]	Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268. 
[n]	R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929. 
[n]	F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404. 
[n]	D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487. 
[n]	G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL019, unpublished. 
[n]	S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n]	S. H. Chang et al., “The Effect of Improving the Temperature  Variation at the SSRC Storage  Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485. 
[n]	G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870. 
[n]	S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921. 
[n]	A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n]	L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 227-230. doi:10.18429/JACoW-SRF2017-MOPB072
[n]	R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669. 
[n]	C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 207-210. 
[n]	S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644. 
[n]	T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2147-2150. 
[n]	D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882. 
[n]	J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347. 
[n]	E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2160-2162. doi:10.18429/JACoW-IPAC2019-TUPTS103
[n]	Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712. 
[n]	W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n]	F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820. 
[n]	D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817. 
[n]	T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188. 
[n]	J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134. 
[n]	E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n]	K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685. 
[n]	J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446. 
[n]	D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1563-1566. 
[n]	R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126. 
[n]	M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88. 
[n]	K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150. 
[n]	J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375. 
[n]	K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396. 
[n]	O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879. 
[n]	K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350. 
[n]	J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437. 
[n]	M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587. 
[n]	J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598. 
[n]	R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180. 
[n]	G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191. 
[n]	A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105. 
[n]	S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747. 
[n]	P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363. 
[n]	L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n]	G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244. 
[n]	J. Safranek, “Beam Dynamics in Wigglers:  Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1307-1310. 
[n]	M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search