Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 289. doi:10.18429/JACoW-MEDSI2020-WEPB12
[n] S. H. Lee et al., “Design and Fabrication Challenges of Transition Section for the CWA Module”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 273. doi:10.18429/JACoW-MEDSI2020-WEPB04
[n] W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB103, unpublished.
[n] L. M. Bollinger, “Invited Paper: Present Status and Probable Future Capabilities of Heavy-Ion Linear Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper K02, pp. 504-510.
[n] T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
[n] M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 261-263. doi:10.18429/JACoW-MEDSI2018-WEPH26
[n] K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 547-551. doi:10.18429/JACoW-ICALEPCS2023-TUPDP022
[n] Y. M. Peng and Y. Zhang, “The Luminosity Reduction with Hourglass Effect and Crossing Angle in an e-p Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2016-2018. doi:10.18429/JACoW-IPAC2015-TUPTY010
[n] V. Moens, R. Bruce, S. Redaelli, B. Salvachua, and G. Valentino, “Comparison of LHC Beam Loss Maps using the Transverse Damper Blow up and Tune Resonance Crossing Methods”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO050, pp. 1008-1010.
[n] O. Berrig, D. Lohmann, G. Morpurgo, and H. Schmickler, “Real-time Monitoring of Beam-beam Modes at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13H, pp. 1568-1570.
[n] L. R. M. Rib??, D. Alloza, C. Colldelram, J. Nicolas, and I. Sics, “The Fizeau System Instrument at ALBA Optics Laboratory”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 235. doi:10.18429/JACoW-MEDSI2020-WEPA07
[n] O. Groe, “The Performance of the Ultra-high Vacuum System of LEP and the Experience Gained during the First Year of Operation”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 337-340.
[n] N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 702-706. doi:10.18429/JACoW-FEL2015-WEP062
[n] R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1365-1368. doi:10.18429/JACoW-IPAC2019-TUPMP051
[n] D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
[n] K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and M. Schm?Âkel, “Clean-Room Facilities for High Gradient Resonator Preparation”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP14, pp. 486-488.
[n] S. Stahl and C. Ankenbrandt, “Simulation of the Capture Process in the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1117-1120.
[n] J. Seeman et al., “Parameters of a Super-B-Factory Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP034, pp. 2333-2335.
[n] J. Hetzel et al., “Final preparation of accelerated and polarised protons at COSY Jülich”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1657-1660. doi:10.18429/JACoW-IPAC2024-TUPS12
[n] A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 299. doi:10.18429/JACoW-MEDSI2020-WEPB16
[n] A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 259. doi:10.18429/JACoW-MEDSI2020-WEPA14
[n] A. Brauch et al., “Status of the new bunch length measurement system downstream of the injector of the S-DALINAC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2415-2417. doi:10.18429/JACoW-IPAC2024-WEPG84
[n] K. L. F. Bane and P. L. Morton, “Deflection by the Image Current and Charges of a Beam Scraper”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-22, pp. 490-492.
[n] I. G. Brown, J. E. Galvin, B. F. Gavin, and R. A. MacGill, “Effect of Resonant Microwave Power on a PIG Ion Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1800-1803.
[n] J. C. Biasci, “The Extremely Brilliant Source (EBS) Project”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEIO01, pp. XX-XX.
[n] Y. Hashimoto et al., “Development of a Beam Profile Monitor using Nitrogen-Molecular Jet for Intense Beams”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB73, pp. 511-514.
[n] S. Sierra et al., “Status of the Development and Manufacturing of LCLS-II Fundamental Power Couplers”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 782-784. doi:10.18429/JACoW-LINAC2016-THPRC008
[n] S. Feher et al., “Quench Protection of SC Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P001, pp. 3389-3391.
[n] C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
[n] R. Ollier, P. Alexandre, R. Ben El Fekih, and L. S. Nadolski, “Design and Commissioning of a Multipole Injection Kicker for the SOLEIL Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3525-3528. doi:10.18429/JACoW-IPAC2021-WEPAB353
[n] D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
[n] S. Rimjaem et al., “Physics and Technical Design for the Second High Energy Dispersive Section at PITZ”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD26, pp. 107-109.
[n] J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
[n] T. Gallagher, A. Wolski, and B. Muratori, “A machine learning approach to shaping magnetic fringe fields for beam dynamics control”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2900-2903. doi:10.18429/JACoW-IPAC2023-WEPA107
[n] A. R. Galimov, A. V. Butenko, A. V. Philippov, A. N. Svidetelev, and A. M. Tikhomirov, “Features of Reaching the Operating Vacuum in the Accelerators of the NICA Project”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEC02, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 289.
- S. H. Lee et al., “Design and Fabrication Challenges of Transition Section for the CWA Module”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 273.
- W. Shields et al., “Status update of the laser-hybrid accelerator for radiobiological applications”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB103, this conference.
- L. M. Bollinger, “Invited Paper: Present Status and Probable Future Capabilities of Heavy-Ion Linear Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper K02, pp. 504-510.
- T. Zhang et al., “Numerical Investigations of Transverse Gradient Undulator Based Novel Light Sources”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO84, pp. 152-155.
- M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 261-263.
- K. Zenker, M. Justus, and R. Steinbrück, “DALI Control System Considerations”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP022, pp. 547-551.
- Y. M. Peng and Y. Zhang, “The Luminosity Reduction with Hourglass Effect and Crossing Angle in an e-p Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2016-2018.
- V. Moens, R. Bruce, S. Redaelli, B. Salvachua, and G. Valentino, “Comparison of LHC Beam Loss Maps using the Transverse Damper Blow up and Tune Resonance Crossing Methods”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO050, pp. 1008-1010.
- O. Berrig, D. Lohmann, G. Morpurgo, and H. Schmickler, “Real-time Monitoring of Beam-beam Modes at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP13H, pp. 1568-1570.
- L. R. M. Rib??, D. Alloza, C. Colldelram, J. Nicolas, and I. Sics, “The Fizeau System Instrument at ALBA Optics Laboratory”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 235.
- O. Groe, “The Performance of the Ultra-high Vacuum System of LEP and the Experience Gained during the First Year of Operation”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 337-340.
- N. Chaisueb and S. Rimjaem, “Study on Undulator Radiation from Femtosecond Electron Bunches”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 702-706.
- R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1365-1368.
- D. Li et al., “Design and Fabrication of an 805 MHz RF Cavity with Be Windows for a High RF Power Testing for a Muon Cooling Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH062, pp. 918-920.
- K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and M. Schm?Âkel, “Clean-Room Facilities for High Gradient Resonator Preparation”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP14, pp. 486-488.
- S. Stahl and C. Ankenbrandt, “Simulation of the Capture Process in the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1117-1120.
- J. Seeman et al., “Parameters of a Super-B-Factory Design”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP034, pp. 2333-2335.
- J. Hetzel et al., “Final preparation of accelerated and polarised protons at COSY Jülich”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS12, pp. 1657-1660.
- A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 299.
- A. Crisol et al., “All Applications of the ALBA Skin Concept”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 259.
- A. Brauch et al., “Status of the new bunch length measurement system downstream of the injector of the S-DALINAC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG84, pp. 2415-2417.
- K. L. F. Bane and P. L. Morton, “Deflection by the Image Current and Charges of a Beam Scraper”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-22, pp. 490-492.
- I. G. Brown, J. E. Galvin, B. F. Gavin, and R. A. MacGill, “Effect of Resonant Microwave Power on a PIG Ion Source”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1800-1803.
- J. C. Biasci, “The Extremely Brilliant Source (EBS) Project”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEIO01, pp. XX-XX.
- Y. Hashimoto et al., “Development of a Beam Profile Monitor using Nitrogen-Molecular Jet for Intense Beams”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB73, pp. 511-514.
- S. Sierra et al., “Status of the Development and Manufacturing of LCLS-II Fundamental Power Couplers”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 782-784.
- S. Feher et al., “Quench Protection of SC Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P001, pp. 3389-3391.
- C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
- R. Ollier, P. Alexandre, R. Ben El Fekih, and L. S. Nadolski, “Design and Commissioning of a Multipole Injection Kicker for the SOLEIL Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3525-3528.
- D. S. Prono, G. J. Caporaso, J. C. Clark, E. J. Lauer, and K. W. Struve, “A Simple Method for Damping Transverse Motion of a High Intensity Electron Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2510-2513.
- S. Rimjaem et al., “Physics and Technical Design for the Second High Energy Dispersive Section at PITZ”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD26, pp. 107-109.
- J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
- T. Gallagher, A. Wolski, and B. Muratori, “A machine learning approach to shaping magnetic fringe fields for beam dynamics control”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA107, pp. 2900-2903.
- A. R. Galimov, A. V. Butenko, A. V. Philippov, A. N. Svidetelev, and A. M. Tikhomirov, “Features of Reaching the Operating Vacuum in the Accelerators of the NICA Project”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEC02, unpublished.
Back to search