Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
[n] B. Y. Sharkov et al., “Experiments with Fe-ion Beam Generation Acceleration and Accumulation in ITEP-TWAC Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC122, pp. 352-354.
[n] E. D. Hudson, F. Irwin, M. L. Mallory, J. A. Martin, and F. E. McDaniel, “Magnetic-Field Trimming Studies for a Separated-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-16, pp. 201-204.
[n] R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
[n] S. Jin et al., “Development of EP System at IHEP”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2890-2892. doi:10.18429/JACoW-IPAC2019-WEPRB037
[n] G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 938-941.
[n] G. X. Xia et al., “A Proposed Experimental Test of Proton-Driven Plasma Wakefield Acceleration Based on CERN SPS”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBN5, pp. 718-720.
[n] W. Joho, “Beam Transfer Between Accelerators at Cyclotron Facilities (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-01, pp. 209-218.
[n] G. Isoyama et al., “Upgrade of the L-Band Linac at ISIR, Osaka University for Higher Operational Stability”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUM204, pp. XX-XX.
[n] A. V. Petrenko, A. Burdakov, A. M. Kudryavtsev, P. V. Logatchev, K. V. Lotov, and A. N. Skrinsky, “Experimental Plasma Wake-field Acceleration Project at the VEPP-5 Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT088, pp. 740-742.
[n] R. W. Garnett et al., “LANSCE H+ RFQ Status”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4073-4075. doi:10.18429/JACoW-IPAC2015-THPF148
[n] S. S. Kurennoy, J. F. O, E. R. Olivas, and L. Rybarcyk, “H-Mode Accelerating Structures with PMQ Focusing for Low-Beta Ion Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD062, pp. 828-830.
[n] E. Baron, M. P. Bourgarel, and P. Mandrillon, “The GANIL Injector”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-05, pp. 132-134.
[n] T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4919-4922. doi:10.18429/JACoW-IPAC2023-THPM017
[n] R. H. M. Gummer, R. L. Poirier, and M. Zach, “TRIUMF RF System - Initial Operating Problems and their Solutions”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-07, pp. 167-170.
[n] W. A. van Kampen and J. Liedorp, “Precession Injection in the Delft Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-09, pp. 254-259.
[n] Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “Simulation a High Step-up DC-DC Converter for Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3579-3581. doi:10.18429/JACoW-IPAC2016-THPMW018
[n] L. Faillace et al., “Planning, installation and testing of the RF system for the upgrade of the Star facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2101-2103. doi:10.18429/JACoW-IPAC2023-TUPL154
[n] G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
[n] T. Limberg et al., “Optimized Bunch Compression System for the European XFEL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT011, pp. 1236-1238.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
- B. Y. Sharkov et al., “Experiments with Fe-ion Beam Generation Acceleration and Accumulation in ITEP-TWAC Facility”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC122, pp. 352-354.
- E. D. Hudson, F. Irwin, M. L. Mallory, J. A. Martin, and F. E. McDaniel, “Magnetic-Field Trimming Studies for a Separated-Sector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-16, pp. 201-204.
- R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
- S. Jin et al., “Development of EP System at IHEP”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2890-2892.
- G. Arnolds-Mayer, W.-D. Moeller, A. Matheisen, and D. Proch, “Industrial Production of Superconducting Accelerating Cavities for HERA”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 938-941.
- G. X. Xia et al., “A Proposed Experimental Test of Proton-Driven Plasma Wakefield Acceleration Based on CERN SPS”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBN5, pp. 718-720.
- W. Joho, “Beam Transfer Between Accelerators at Cyclotron Facilities (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-01, pp. 209-218.
- G. Isoyama et al., “Upgrade of the L-Band Linac at ISIR, Osaka University for Higher Operational Stability”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUM204, pp. XX-XX.
- A. V. Petrenko, A. Burdakov, A. M. Kudryavtsev, P. V. Logatchev, K. V. Lotov, and A. N. Skrinsky, “Experimental Plasma Wake-field Acceleration Project at the VEPP-5 Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT088, pp. 740-742.
- R. W. Garnett et al., “LANSCE H+ RFQ Status”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4073-4075.
- S. S. Kurennoy, J. F. O, E. R. Olivas, and L. Rybarcyk, “H-Mode Accelerating Structures with PMQ Focusing for Low-Beta Ion Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD062, pp. 828-830.
- E. Baron, M. P. Bourgarel, and P. Mandrillon, “The GANIL Injector”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-05, pp. 132-134.
- T. Griesemer et al., “Design development and technological R&D for niobium-cladded beam production targets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM017, pp. 4919-4922.
- R. H. M. Gummer, R. L. Poirier, and M. Zach, “TRIUMF RF System - Initial Operating Problems and their Solutions”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-07, pp. 167-170.
- W. A. van Kampen and J. Liedorp, “Precession Injection in the Delft Isochronous Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-09, pp. 254-259.
- Y. S. Wong, Y.-C. Chien, C. Y. Liu, K.-B. Liu, and B. S. Wang, “Simulation a High Step-up DC-DC Converter for Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3579-3581.
- L. Faillace et al., “Planning, installation and testing of the RF system for the upgrade of the Star facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL154, pp. 2101-2103.
- G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717.
- T. Limberg et al., “Optimized Bunch Compression System for the European XFEL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT011, pp. 1236-1238.
Back to search