Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. M. Cook, J. P. Edelen, C. C. Hall, and J.-L. Vay, “Self-Consistent Simulation and Optimization of Space-Charge Limited Thermionic Energy Converters”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 543-545. doi:10.18429/JACoW-IPAC2018-MOPML060
[n] Ch. Steinbach, “Beam Optics at Resonant Extraction Septa”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 857-860.
[n] R. Sidlow and N. D. West, “Performance of the Penning H- Ion Source at ISIS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1005-1008.
[n] M. Leitner et al., “Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3408-3413. doi:10.18429/JACoW-IPAC2019-THYPLM1
[n] A. B. Wengrow et al., “Development of a High Duty Factor, Surface Conversion H$^-$ Ion Source for the LANSCE Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W028, pp. 2764-2766.
[n] Q. Ji et al., “Micro-Electromechanical Systems Based Multi-Beam Ion Accelerators”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZD5, unpublished.
[n] S. R. Koscielniak et al., “Electron Linac Photo-fission Driver for the Rare Isotope Program at TRIUMF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOOBC01, pp. 64-66.
[n] H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 868-871.
[n] R. Stevens Jr, “Space-Charge Neutralization Measurement of a 75-keV, 130-mA Hydrogen-Ion Beam”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W010, pp. 2723-2725.
[n] R. Corsini and D. Schulte, “Beam Transverse Stability in The CLIC Combiner Rings”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO434, pp. 112-114.
[n] M. Rei?ƒig et al., “Status of a Monitor Design for Single-Shot Electro-Optical Bunch Profile Measurements at FCC-ee”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 455-459. doi:10.18429/JACoW-IBIC2022-WEP26
[n] S. J. Park et al., “Preliminary Design of High-efficiency Klystron for Pohang Accelerator Laboratory (PAL)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 557-559. doi:10.18429/JACoW-IPAC2016-MOPMY027
[n] S. V. Martynov, V. I. Pershin, V. K. Platnikov, and N. Ya Popova, “Investigation of the Effect of Increasing of the Transverse Phase Volume of the Beam in an Electron Gun with Different Cold Cathodes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1011-1014.
[n] A. Eichler et al., “Enhancing quench detection in SRF cavities at the EuXFEL: Towards machine learning approaches and practical challenges”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS134, unpublished.
[n] A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
[n] T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
[n] J. A. Clarke, H. L. Owen, M. W. Poole, and S. L. Smith, “Progress with the SRS Upgrade Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP41G, pp. 571-573.
[n] T. J. P. Ellison, C. M. Fox, S. W. Koch, and R. Liu, “Nondestructive Diagnostics for Measuring the Phase, Position, and Intensity of 15 enA Beams from the IUCF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I-03, pp. 279-283.
[n] M. Schalwat, M. Koepke, A. Matheisen, and H. Weitkaemper, “Set up of Production Line for EXFEL Beam Position Monitor and Quadrupol Units for Cavity String Assembly at CEA”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP047, pp. 224-226.
[n] N. Eddy, B. J. Fellenz, P. S. Prieto, and S. Z. Zorzetti, “Transverse Damper Using Diodes for Slip Stacking in the Fermilab Recycler”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 267-269. doi:10.18429/JACoW-IBIC2017-TUPCF21
[n] R. D?Âlling, E. Johansen, W. Koprek, D. Llorente Sancho, and M. Roggli, “Development of New Loss Monitor Electronics for the HIPA Facility”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 141-145. doi:10.18429/JACoW-IBIC2019-MOPP024
[n] K. Schindl et al., “The LHC Lead Ion Injector Chain”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT011, pp. 1153-1155.
[n] T. Hakulinen, J. B. Lopez Costa, P. Ninin, H. Nissen, and R. Nunes, “Application of Virtualization to CERN Access and Safety Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC054, pp. 214-217.
[n] S. Bettoni et al., “Multipoles Minimization in the DANE Wigglers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE065, pp. 4665-4667.
[n] Y. Ivanyushenkov, “A Concept of a Universal Superconducting Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2050-2052. doi:10.18429/JACoW-IPAC2014-WEPRO048
[n] E. Perepelkin and S. Vorozhtsov, “CBDA - CYCLOTRON BEAM DYNAMICS ANALYSIS CODE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH15, pp. XX-XX.
[n] H. Park, A. Hutton, F. Marhauser, S. U. De Silva, and J. R. Delayen, “Development of a Superconducting Twin Axis Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 932-935. doi:10.18429/JACoW-LINAC2016-THPLR037
[n] S. Boucher et al., “Compact, Inexpensive X-Band Linacs as Radioactive Isotope Source Replacements”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR069, pp. 4136-4138.
For LaTeX
Use Complete Form
For BibTeX
References
- N. M. Cook, J. P. Edelen, C. C. Hall, and J.-L. Vay, “Self-Consistent Simulation and Optimization of Space-Charge Limited Thermionic Energy Converters”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 543-545.
- Ch. Steinbach, “Beam Optics at Resonant Extraction Septa”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 857-860.
- R. Sidlow and N. D. West, “Performance of the Penning H- Ion Source at ISIS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1005-1008.
- M. Leitner et al., “Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3408-3413.
- A. B. Wengrow et al., “Development of a High Duty Factor, Surface Conversion H$^-$ Ion Source for the LANSCE Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W028, pp. 2764-2766.
- Q. Ji et al., “Micro-Electromechanical Systems Based Multi-Beam Ion Accelerators”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEZD5, unpublished.
- S. R. Koscielniak et al., “Electron Linac Photo-fission Driver for the Rare Isotope Program at TRIUMF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOOBC01, pp. 64-66.
- H. Henke, “Diffraction Radiation of Charges Moving Past Conducting Screens”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 868-871.
- R. Stevens Jr, “Space-Charge Neutralization Measurement of a 75-keV, 130-mA Hydrogen-Ion Beam”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W010, pp. 2723-2725.
- R. Corsini and D. Schulte, “Beam Transverse Stability in The CLIC Combiner Rings”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO434, pp. 112-114.
- M. Rei?ƒig et al., “Status of a Monitor Design for Single-Shot Electro-Optical Bunch Profile Measurements at FCC-ee”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 455-459.
- S. J. Park et al., “Preliminary Design of High-efficiency Klystron for Pohang Accelerator Laboratory (PAL)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 557-559.
- S. V. Martynov, V. I. Pershin, V. K. Platnikov, and N. Ya Popova, “Investigation of the Effect of Increasing of the Transverse Phase Volume of the Beam in an Electron Gun with Different Cold Cathodes”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1011-1014.
- A. Eichler et al., “Enhancing quench detection in SRF cavities at the EuXFEL: Towards machine learning approaches and practical challenges”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS134, this conference.
- A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
- T. Hakulinen, P. Ninin, R. Nunes, and T. R. Riesco, “Revisiting CERN Safety System Monitoring (SSM)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC055, pp. 218-221.
- J. A. Clarke, H. L. Owen, M. W. Poole, and S. L. Smith, “Progress with the SRS Upgrade Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP41G, pp. 571-573.
- T. J. P. Ellison, C. M. Fox, S. W. Koch, and R. Liu, “Nondestructive Diagnostics for Measuring the Phase, Position, and Intensity of 15 enA Beams from the IUCF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I-03, pp. 279-283.
- M. Schalwat, M. Koepke, A. Matheisen, and H. Weitkaemper, “Set up of Production Line for EXFEL Beam Position Monitor and Quadrupol Units for Cavity String Assembly at CEA”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP047, pp. 224-226.
- N. Eddy, B. J. Fellenz, P. S. Prieto, and S. Z. Zorzetti, “Transverse Damper Using Diodes for Slip Stacking in the Fermilab Recycler”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 267-269.
- R. D?Âlling, E. Johansen, W. Koprek, D. Llorente Sancho, and M. Roggli, “Development of New Loss Monitor Electronics for the HIPA Facility”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 141-145.
- K. Schindl et al., “The LHC Lead Ion Injector Chain”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT011, pp. 1153-1155.
- T. Hakulinen, J. B. Lopez Costa, P. Ninin, H. Nissen, and R. Nunes, “Application of Virtualization to CERN Access and Safety Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC054, pp. 214-217.
- S. Bettoni et al., “Multipoles Minimization in the DANE Wigglers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE065, pp. 4665-4667.
- Y. Ivanyushenkov, “A Concept of a Universal Superconducting Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2050-2052.
- E. Perepelkin and S. Vorozhtsov, “CBDA - CYCLOTRON BEAM DYNAMICS ANALYSIS CODE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH15, pp. XX-XX.
- H. Park, A. Hutton, F. Marhauser, S. U. De Silva, and J. R. Delayen, “Development of a Superconducting Twin Axis Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 932-935.
- S. Boucher et al., “Compact, Inexpensive X-Band Linacs as Radioactive Isotope Source Replacements”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR069, pp. 4136-4138.
Back to search