Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. L. Mallory, G. Grimmett, R. Tilbury, and D. Yang, “Dual Chemical Station for Cyclotron Produced 18F”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-07, pp. 222-225.
[n] M. Gehlot, R. Khullar, G. Mishra, H. Jeevakhan, and G. Sharma, “Undulator Development Activities at DAVV-Indore”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 133-137. doi:10.18429/JACoW-FLS2018-WEP2PT030
[n] Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
[n] W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
[n] C. Zhang et al., “The Multipacting Simulation for the New-shaped QWR using TRACK3P”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB056, pp. 603-605.
[n] J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
[n] D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
[n] S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 505-508. doi:10.18429/JACoW-IBIC2018-WEPC08
[n] S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
[n] V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
[n] W. Hain, F. Hornstra, A. Lazos, G. Miat, G. Samulat, and K. Wittenburg, “Beam Profile Monitors for the HERA Proton Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 759-762.
[n] H. C. Liu et al., “CSNS DTL Prototyping and RF Tuning”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB103, pp. 702-704.
[n] Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 906-909. doi:10.18429/JACoW-IPAC2016-MOPOY026
[n] K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
[n] H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
[n] V. L. Dorokhov et al., “The New Optical Device for Turn to Turn Beam Profile Measurement”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 593-596. doi:10.18429/JACoW-IBIC2016-WEBL04
[n] L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
[n] J. Zemella, D. Novikov, M. Tolkiehn, J. Rossbach, and H. Sinn, “Study of a Silicon Based XFELO for the European XFEL”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA07, pp. 202-205.
[n] A. J. Gee and B. Erdelyi, “Implementing the Fast Multipole Boundary Element Method With High-Order Elements”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 518-520. doi:10.18429/JACoW-NAPAC2016-TUPOB15
[n] K. Blasche et al., “Commissioning of the Electron Cooling Device in the Heavy Ion Synchrotron SIS”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05A, pp. 550-552.
[n] W. D. Klotz and R. Maier, “Linear and Nonlinear Orbit Calculations in Non-isomagnetic Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1269-1272.
[n] I. B. Vasserman et al., “Magnetic Measurements and Tuning of Undulators for the APS FEL Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP97, pp. 2489-2491.
[n] E. A. Wadlinger, H. D. Holt, and D. B. Holtkamp, “An Instrumentation and Control System for the AT-2 Accelerator Test Stand”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0023, pp. 150-152.
[n] S. Bousson et al., “An Alternative Scheme for Stiffening SRF Cavities by Plasma Spraying”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP109, pp. 919-921.
[n] A. E. Wheelhouse et al., “Commissioning of the Transverse Deflecting Cavity on VELA at Daresbury Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3239-3241. doi:10.18429/JACoW-IPAC2015-WEPHA054
[n] R. S. Livingston, “Introductory Comments”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 787-788.
[n] T. Satogata et al., “RHIC BPM System Performance, Upgrades, and Tools”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI102, pp. 1963-1965.
[n] J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
[n] V. L. Uvarov et al., “A Possibility of High-Energy Bremsstrahlung Dosimetry by Indium Activation”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THBOR03, pp. 155-157.
[n] K. K. Pant, S. Krishnagopal, and S. Chouksey, “RF Results and Beam Dynamics Simulations of A Prototype S-Band Photocathode Gun”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU445, pp. 419-421.
[n] T. Hattori, E. Arai, Y. Oguri, K. Sato, and H. Suzuki, “Construction and Acceleration Characteristics of the Tokyo Institute of Technology Heavy Ion Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-50, pp. 377-379.
[n] G. Valentino, R. W. Assmann, D. Jacquet, S. Redaelli, and E. Veyrunes, “Online Status and Settings Monitoring for the LHC Collimators”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC111, pp. 836-839.
[n] I. Ashkenazi, J. A. Fugitt, J. C. Hovater, G. E. Lahti, K. L. Mahoney, and S. N. Simrock, “Calibration and Operation Schemes for CEBAF RF Control”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU462, pp. 480-483.
[n] Y. J. Pei et al., “Commissioning of the Compact 14MeV LINAC for an FEL-Based THz Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 509-511. doi:10.18429/JACoW-LINAC2016-TUPLR020
[n] C. Yao, N. P. Di Monte, W. E. Norum, V. Sajaev, and H. Shang, “Commissioning of the Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP065, pp. 4102-4104.
[n] J. Dinkel and J. Biggs, “A Precision Pulser for Main Ring Extraction”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3760-3763.
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
[n] J. M. Schippers and M. Seidel, “Accelerators for Medical Application: what is so special?”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2807-2811. doi:10.18429/JACoW-IPAC2014-THXB01
[n] Y.-C. Liu et al., “Operation Experience at Taiwan Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA061, pp. 220-221.
[n] J. W. McKenzie et al., “Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2983-2985. doi:10.18429/JACoW-IPAC2014-THPRO051
[n] M. Castellano et al., “Early Results of Beam Acceleration in The SC Linac LISA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 731-733.
[n] N. Baboi, B. Lorbeer, P. Zhang, N. Eddy, B. J. Fellenz, and M. Wendt, “HOM Choice Study with Test Electronics for use as Beam Position Diagnostics in 3.9 GHz Accelerating Cavities in FLASH”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA16, pp. 364-368.
[n] A. I. Kvasha, A. Feschenko, and V. L. Serov, “Status of INR DTL RF System”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA022, pp. 293-295.
[n] E. Colby, C. D. Barnes, and C. M. Sears, “An Electron Source for a Laser Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB026, pp. 2101-2103.
[n] R. S. Livingston, “Session IV Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
[n] W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 321-324.
[n] E. Beebe, J. G. Alessi, A. Kponou, A. I. Pikin, and K. Prelec, “A New Generation of EBIS: High Current Devices for Accelerators and Colliders”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THALA001, pp. 281-283.
[n] C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
[n] I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
[n] P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
[n] C. C. Liang, C. S. Chou, K. T. Hsu, W. K. Lau, A. P. Lee, and S. H. Lee, “Time Jitter Measurement for the NSRRC Photo-Injector Drive Laser”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP094, pp. 4177-4179.
[n] S. Wang, F. R. Brumwell, J. C. Dooling, R. Kustom, G. E. McMichael, and M. E. Middendorf, “The Investigation of Injection Timing for the IPNS RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS007, pp. 1667-1669.
[n] A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
[n] J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
For LaTeX
Use Complete Form
For BibTeX
References
- M. L. Mallory, G. Grimmett, R. Tilbury, and D. Yang, “Dual Chemical Station for Cyclotron Produced 18F”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper V-07, pp. 222-225.
- M. Gehlot, R. Khullar, G. Mishra, H. Jeevakhan, and G. Sharma, “Undulator Development Activities at DAVV-Indore”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 133-137.
- Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
- W. Lawson et al., “Operating Characteristics of 17.14 GHz Frequency-Doubling Coaxial Gyroklystrons”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH080, pp. 954-956.
- C. Zhang et al., “The Multipacting Simulation for the New-shaped QWR using TRACK3P”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB056, pp. 603-605.
- J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
- D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
- S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Optical System of Beam Induced Fluorescence Monitor Toward MW Beam Power at the J-PARC Neutrino Beamline”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 505-508.
- S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292.
- V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
- W. Hain, F. Hornstra, A. Lazos, G. Miat, G. Samulat, and K. Wittenburg, “Beam Profile Monitors for the HERA Proton Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 759-762.
- H. C. Liu et al., “CSNS DTL Prototyping and RF Tuning”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB103, pp. 702-704.
- Y. Kondo et al., “Baseline Design of a Proton Linac for BNCT at OIST”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 906-909.
- K. Takayama, T. Adachi, K. Okamura, M. Wake, and Y. Iwata, “A Racetrack-Shape Fixed Field Induction Accelerator for Giant Cluster Ions”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA18, pp. 83-85.
- H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
- V. L. Dorokhov et al., “The New Optical Device for Turn to Turn Beam Profile Measurement”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 593-596.
- L. P. Yang, “Web-based Real time Database Access for BEPC II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP114, pp. 898-900.
- J. Zemella, D. Novikov, M. Tolkiehn, J. Rossbach, and H. Sinn, “Study of a Silicon Based XFELO for the European XFEL”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA07, pp. 202-205.
- A. J. Gee and B. Erdelyi, “Implementing the Fast Multipole Boundary Element Method With High-Order Elements”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 518-520.
- K. Blasche et al., “Commissioning of the Electron Cooling Device in the Heavy Ion Synchrotron SIS”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05A, pp. 550-552.
- W. D. Klotz and R. Maier, “Linear and Nonlinear Orbit Calculations in Non-isomagnetic Fields”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1269-1272.
- I. B. Vasserman et al., “Magnetic Measurements and Tuning of Undulators for the APS FEL Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP97, pp. 2489-2491.
- E. A. Wadlinger, H. D. Holt, and D. B. Holtkamp, “An Instrumentation and Control System for the AT-2 Accelerator Test Stand”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0023, pp. 150-152.
- S. Bousson et al., “An Alternative Scheme for Stiffening SRF Cavities by Plasma Spraying”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP109, pp. 919-921.
- A. E. Wheelhouse et al., “Commissioning of the Transverse Deflecting Cavity on VELA at Daresbury Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3239-3241.
- R. S. Livingston, “Introductory Comments”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 787-788.
- T. Satogata et al., “RHIC BPM System Performance, Upgrades, and Tools”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI102, pp. 1963-1965.
- J. McCarrick et al., “Electron Beam/Converter Target Interactions in Radiographic Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC009, pp. 563-567.
- V. L. Uvarov et al., “A Possibility of High-Energy Bremsstrahlung Dosimetry by Indium Activation”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THBOR03, pp. 155-157.
- K. K. Pant, S. Krishnagopal, and S. Chouksey, “RF Results and Beam Dynamics Simulations of A Prototype S-Band Photocathode Gun”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU445, pp. 419-421.
- T. Hattori, E. Arai, Y. Oguri, K. Sato, and H. Suzuki, “Construction and Acceleration Characteristics of the Tokyo Institute of Technology Heavy Ion Linac”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-50, pp. 377-379.
- G. Valentino, R. W. Assmann, D. Jacquet, S. Redaelli, and E. Veyrunes, “Online Status and Settings Monitoring for the LHC Collimators”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC111, pp. 836-839.
- I. Ashkenazi, J. A. Fugitt, J. C. Hovater, G. E. Lahti, K. L. Mahoney, and S. N. Simrock, “Calibration and Operation Schemes for CEBAF RF Control”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU462, pp. 480-483.
- Y. J. Pei et al., “Commissioning of the Compact 14MeV LINAC for an FEL-Based THz Source”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 509-511.
- C. Yao, N. P. Di Monte, W. E. Norum, V. Sajaev, and H. Shang, “Commissioning of the Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP065, pp. 4102-4104.
- J. Dinkel and J. Biggs, “A Precision Pulser for Main Ring Extraction”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3760-3763.
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
- J. M. Schippers and M. Seidel, “Accelerators for Medical Application: what is so special?”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2807-2811.
- Y.-C. Liu et al., “Operation Experience at Taiwan Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA061, pp. 220-221.
- J. W. McKenzie et al., “Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2983-2985.
- M. Castellano et al., “Early Results of Beam Acceleration in The SC Linac LISA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 731-733.
- N. Baboi, B. Lorbeer, P. Zhang, N. Eddy, B. J. Fellenz, and M. Wendt, “HOM Choice Study with Test Electronics for use as Beam Position Diagnostics in 3.9 GHz Accelerating Cavities in FLASH”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA16, pp. 364-368.
- A. I. Kvasha, A. Feschenko, and V. L. Serov, “Status of INR DTL RF System”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA022, pp. 293-295.
- E. Colby, C. D. Barnes, and C. M. Sears, “An Electron Source for a Laser Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB026, pp. 2101-2103.
- R. S. Livingston, “Session IV Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D01, pp. 181-181.
- W. D. Klotz, “Controlling the ESRF Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 321-324.
- E. Beebe, J. G. Alessi, A. Kponou, A. I. Pikin, and K. Prelec, “A New Generation of EBIS: High Current Devices for Accelerators and Colliders”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THALA001, pp. 281-283.
- C. David, J. Jacob, A. Panzarella, J.-P. Perrine, and J.-L. Revol, “Commissioning of the Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02C, pp. 1755-1757.
- I. D. Valova, “Evaluation of OLAP Model Using Intuitionistic Fuzzy (IF) Logic”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP099, pp. XX-XX.
- P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
- C. C. Liang, C. S. Chou, K. T. Hsu, W. K. Lau, A. P. Lee, and S. H. Lee, “Time Jitter Measurement for the NSRRC Photo-Injector Drive Laser”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP094, pp. 4177-4179.
- S. Wang, F. R. Brumwell, J. C. Dooling, R. Kustom, G. E. McMichael, and M. E. Middendorf, “The Investigation of Injection Timing for the IPNS RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS007, pp. 1667-1669.
- A. V. Rauchas, F. R. Brumwell, and G. J. Volk, “Commissioning of the Argonne Intense Pulsed Neutron Source (IPNS-I) Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3006-3009.
- J. W. Xia, Y. Liu, L. J. Mao, R. S. Mao, J. C. Yang, and Y. J. Yuan, “Lanzhou Cooler Storage Ring Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THYMH01, pp. 3611-3615.
Back to search