Reference Search

Favourites

For Word

[n]	D. Kiehlmann, M. Peiniger, and H. Vogel, “Design and Fabrication of Normal Conducting Accelerator Sections”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1343-1345. 

[n]	N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, and A. Tuzikov, “3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP065, pp. 3509-3511. 

[n]	P. Burrows et al., “Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1136-1138. doi:10.18429/JACoW-IPAC2015-MOPTY084

[n]	G. Franchetti, “Effect of Self-consistency on Space Charge Induced Beam Loss”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME001, pp. 1556-1558. 

[n]	H. G. Blosser, “Adjustment of Trimming-Coil Currents”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B07, pp. 121-124. 

[n]	X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174. 

[n]	J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755. 

[n]	G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591. 

[n]	T. H. Luo, D. J. Summers, and D. Li, “Design of a Normal-conducting RF-dipole Deflecting Cavity”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI091, pp. 2911-2913. 

[n]	W. R. DeVan, D. P. Gurd, J. Hammonds, S. A. Lewis, and J. D. Smith, “Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL1, pp. 355-359. 

[n]	A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160. 

For LaTeX

%\cite{Kiehlmann:EPAC92} \bibitem{Kiehlmann:EPAC92} D. Kiehlmann, M. Peiniger, and H. Vogel, \textquotedblleft{Design and Fabrication of Normal Conducting Accelerator Sections}\textquotedblright, in \emph{Proc. EPAC’92}, Berlin, Germany, Mar. 1992, pp. 1343--1345. %\cite{Kazarinov:EPAC08-THPP065} \bibitem{Kazarinov:EPAC08-THPP065} N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, and A. Tuzikov, \textquotedblleft{3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron}\textquotedblright, in \emph{Proc. EPAC’08}, Genoa, Italy, Jun. 2008, paper THPP065, pp. 3509--3511. %\cite{Burrows:IPAC15-MOPTY084} \bibitem{Burrows:IPAC15-MOPTY084} P. Burrows \emph{et al.}, \textquotedblleft{Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System}\textquotedblright, in \emph{Proc. IPAC’15}, Richmond, VA, USA, May 2015, pp. 1136--1138. \doi{10.18429/JACoW-IPAC2015-MOPTY084} %\cite{Franchetti:IPAC13-TUPME001} \bibitem{Franchetti:IPAC13-TUPME001} G. Franchetti, \textquotedblleft{Effect of Self-consistency on Space Charge Induced Beam Loss}\textquotedblright, in \emph{Proc. IPAC’13}, Shanghai, China, May 2013, paper TUPME001, pp. 1556--1558. %\cite{Blosser:Cyclotrons59-CYC59B07} \bibitem{Blosser:Cyclotrons59-CYC59B07} H. G. Blosser, \textquotedblleft{Adjustment of Trimming-Coil Currents}\textquotedblright, in \emph{Proc. Cyclotrons’59}, Oak Ridge, TN, USA, Jul. 1959, paper CYC59B07, pp. 121--124. %\cite{XHKe:PAC11-TUP182} \bibitem{XHKe:PAC11-TUP182} X. H. Ke and F. Jenni, \textquotedblleft{In-situ System Identification for an Optimal Control of Magnet Power Supplies}\textquotedblright, in \emph{Proc. PAC’11}, New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172--1174. %\cite{Huang:EPAC00-WEP7A08} \bibitem{Huang:EPAC00-WEP7A08} J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, \textquotedblleft{Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS}\textquotedblright, in \emph{Proc. EPAC’00}, Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753--1755. %\cite{Franchetti:IPAC11-MOPS002} \bibitem{Franchetti:IPAC11-MOPS002} G. Franchetti, \textquotedblleft{Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100}\textquotedblright, in \emph{Proc. IPAC’11}, San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589--591. %\cite{Luo:IPAC13-WEPFI091} \bibitem{Luo:IPAC13-WEPFI091} T. H. Luo, D. J. Summers, and D. Li, \textquotedblleft{Design of a Normal-conducting RF-dipole Deflecting Cavity}\textquotedblright, in \emph{Proc. IPAC’13}, Shanghai, China, May 2013, paper WEPFI091, pp. 2911--2913. %\cite{DeVan:PAC99-WEDL1} \bibitem{DeVan:PAC99-WEDL1} W. R. DeVan, D. P. Gurd, J. Hammonds, S. A. Lewis, and J. D. Smith, \textquotedblleft{Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source}\textquotedblright, in \emph{Proc. PAC’99}, New York, NY, USA, Mar. 1999, paper WEDL1, pp. 355--359. %\cite{Willner:IPAC10-TUPE007} \bibitem{Willner:IPAC10-TUPE007} A. Willner \emph{et al.}, \textquotedblleft{High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg}\textquotedblright, in \emph{Proc. IPAC’10}, Kyoto, Japan, May 2010, paper TUPE007, pp. 2158--2160.

For BibTeX

@inproceedings{kiehlmann:epac92, author = {D. Kiehlmann and M. Peiniger and H. Vogel}, title = {{Design and Fabrication of Normal Conducting Accelerator Sections}}, booktitle = {Proc. EPAC'92}, pages = {1343--1345}, paper = {}, venue = {Berlin, Germany, Mar. 1992}, series = {European Particle Accelerator Conference}, number = {3}, publisher = {JACoW Publishing, Geneva, Switzerland}, language = {english} } @inproceedings{kazarinov:epac08-thpp065, author = {N. Yu. Kazarinov and V. Aleksandrov and V. Shevtsov and A. Tuzikov}, title = {{3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron}}, booktitle = {Proc. EPAC'08}, pages = {3509--3511}, paper = {THPP065}, venue = {Genoa, Italy}, series = {European Particle Accelerator Conference}, number = {11}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {7}, year = {2008}, url = {https://jacow.org/e08/papers/THPP065.pdf}, language = {english} } @inproceedings{burrows:ipac15-mopty084, author = {P. Burrows and others}, title = {{Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System}}, booktitle = {Proc. IPAC'15}, pages = {1136--1138}, paper = {MOPTY084}, venue = {Richmond, VA, USA, May 2015}, publisher = {JACoW Publishing, Geneva, Switzerland}, doi = {10.18429/JACoW-IPAC2015-MOPTY084}, url = {https://jacow.org/IPAC2015/papers/MOPTY084.pdf}, language = {english} } @inproceedings{franchetti:ipac13-tupme001, author = {G. Franchetti}, title = {{Effect of Self-consistency on Space Charge Induced Beam Loss}}, booktitle = {Proc. IPAC'13}, pages = {1556--1558}, paper = {TUPME001}, venue = {Shanghai, China, May 2013}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/IPAC2013/papers/TUPME001.pdf}, language = {english} } @inproceedings{blosser:cyclotrons59-cyc59b07, author = {H. G. Blosser}, title = {{Adjustment of Trimming-Coil Currents}}, booktitle = {Proc. Cyclotrons'59}, pages = {121--124}, paper = {CYC59B07}, venue = {Oak Ridge, TN, USA, Jul. 1959}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/c59/papers/CYC59B07.pdf}, language = {english} } @inproceedings{xhke:pac11-tup182, author = {X. H. Ke and F. Jenni}, title = {{In-situ System Identification for an Optimal Control of Magnet Power Supplies}}, booktitle = {Proc. PAC'11}, pages = {1172--1174}, paper = {TUP182}, venue = {New York, NY, USA}, series = {Particle Accelerator Conference}, number = {24}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {9}, year = {2011}, url = {https://jacow.org/PAC2011/papers/TUP182.pdf}, language = {english} } @inproceedings{huang:epac00-wep7a08, author = {J. Y. Huang and C. Kim and I. S. Ko and W. Namkung}, title = {{Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS}}, booktitle = {Proc. EPAC'00}, pages = {1753--1755}, paper = {WEP7A08}, venue = {Vienna, Austria}, series = {European Particle Accelerator Conference}, number = {7}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {8}, year = {2000}, url = {https://jacow.org/e00/papers/WEP7A08.pdf}, language = {english} } @inproceedings{franchetti:ipac11-mops002, author = {G. Franchetti}, title = {{Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100}}, booktitle = {Proc. IPAC'11}, pages = {589--591}, paper = {MOPS002}, venue = {San Sebastian, Spain}, series = {International Particle Accelerator Conference}, number = {2}, publisher = {JACoW Publishing, Geneva, Switzerland}, month = {9}, year = {2011}, isbn = {978-9-29-083366-6}, url = {https://jacow.org/IPAC2011/papers/MOPS002.pdf}, language = {english} } @inproceedings{luo:ipac13-wepfi091, author = {T. H. Luo and D. J. Summers and D. Li}, title = {{Design of a Normal-conducting RF-dipole Deflecting Cavity}}, booktitle = {Proc. IPAC'13}, pages = {2911--2913}, paper = {WEPFI091}, venue = {Shanghai, China, May 2013}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/IPAC2013/papers/WEPFI091.pdf}, language = {english} } @inproceedings{devan:pac99-wedl1, author = {W. R. DeVan and D. P. Gurd and J. Hammonds and S. A. Lewis and J. D. Smith}, title = {{Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source}}, booktitle = {Proc. PAC'99}, pages = {355--359}, paper = {WEDL1}, venue = {New York, NY, USA, Mar. 1999}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {https://jacow.org/p99/papers/WEDL1.pdf}, language = {english} } @inproceedings{willner:ipac10-tupe007, author = {A. Willner and others}, title = {{High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg}}, booktitle = {Proc. IPAC'10}, pages = {2158--2160}, paper = {TUPE007}, venue = {Kyoto, Japan, May 2010}, publisher = {JACoW Publishing, Geneva, Switzerland}, url = {http://accelconf.web.cern.ch/IPAC10/papers/TUPE007.pdf}, language = {english} }

References

• D. Kiehlmann, M. Peiniger, and H. Vogel, “Design and Fabrication of Normal Conducting Accelerator Sections”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1343-1345.
• N. Yu. Kazarinov, V. Aleksandrov, V. Shevtsov, and A. Tuzikov, “3D Simulation of the Axial Injection Beam Line of DC350 Cyclotron”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP065, pp. 3509-3511.
• P. Burrows et al., “Design, Testing and Performance Results of a High-resolution, Broad-band, Low-latency Stripline Beam Position Monitor System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1136-1138.
• G. Franchetti, “Effect of Self-consistency on Space Charge Induced Beam Loss”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME001, pp. 1556-1558.
• H. G. Blosser, “Adjustment of Trimming-Coil Currents”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59B07, pp. 121-124.
• X. H. Ke and F. Jenni, “In-situ System Identification for an Optimal Control of Magnet Power Supplies”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP182, pp. 1172-1174.
• J. Y. Huang, C. Kim, I. S. Ko, and W. Namkung, “Measurements for 2.4 GeV Beam by Diagnostic Beamline in PLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7A08, pp. 1753-1755.
• G. Franchetti, “Mitigation of Space Charge and Nonlinear Resonance Induced Beam Loss in SIS100”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS002, pp. 589-591.
• T. H. Luo, D. J. Summers, and D. Li, “Design of a Normal-conducting RF-dipole Deflecting Cavity”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI091, pp. 2911-2913.
• W. R. DeVan, D. P. Gurd, J. Hammonds, S. A. Lewis, and J. D. Smith, “Plans for a Collaboratively Developed Distributed Control System for the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL1, pp. 355-359.
• A. Willner et al., “High Repetition Rate Seeding of a Free-Electron Laser at DESY Hamburg”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE007, pp. 2158-2160.