Favourites
For Word
[n] Y. Cai et al., “Measurements, Analysis, and Simulation of Microwave Instability in the Low Energy Ring of KEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP083, pp. 4731-4733.
[n] Y. Nie et al., “Full Characterization of the Bunch-Compressor Dipoles for FLUTE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1585-1588. doi:10.18429/JACoW-IPAC2021-TUPAB087
[n] N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 964-967.
[n] D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 168-172. doi:10.18429/JACoW-MEDSI2018-WEOPMA04
[n] G. Geschonke et al., “Ultimate Performance of the LEP RF System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH123, pp. 1059-1061.
[n] R. Nagaoka, P. Brunelle, A. Nadji, and L. S. Nadolski, “Study of a Lattice with a Lower Emittance at SOLEIL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC004, pp. 1155-1157.
[n] Y.-T. Hsieh et al., “Analysis of low-frequency disturbances (0.3 Hz) in TPS and TLS beam orbit feedback systems”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB059, unpublished.
[n] K. T. Nguyen and H. S. Uhm, “Ion Beam Steering with a High-Intensity Electron Beam”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2623-2626.
[n] C. J. Spataro, A. K. Jain, M. Rehak, and J. Skaritka, “Design and Measurement of the NSLSII Sextupoles”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP010, pp. 151-153.
[n] M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
[n] R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1118-1121. doi:10.18429/JACoW-IPAC2019-MOPTS103
[n] C.-W. Hsu, H.-S. Fung, and C. S. Lee, “Development of residual gas analyzer measurement system capable of operating in the 10 Torr vacuum range”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB004, unpublished.
[n] A. N. Didenko et al., “Neutron Accelerating Tubes with Microwave Deuterons Source Using Electron-cyclotron Resonance Effect”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC50, pp. 441-443.
[n] P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 863-866.
[n] A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1491-1493.
[n] L. Tan, S.-Q. Tian, W. Zhang, X. Liu, and X. Wu, “Impact of insertion devices on SSRF‑U lattice”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3068-3070. doi:10.18429/JACoW-IPAC2024-THPC35
[n] K. Ohmi, Y. Cai, J. W. Flanagan, Y. Funakoshi, and K. Oide, “Dynamic Beta/Emittance Effects in the Measurement of Horizontal Beam Sizes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAC05, pp. 41-43.
[n] M. Rehak, A. K. Jain, J. Skaritka, and C. J. Spataro, “Design and Measurement of the NSLS II Quadrupole Prototypes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP007, pp. 142-144.
[n] J. Gao, J. Le Duff, and Y. Thiery, “Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB01, pp. 95-97.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Cai et al., “Measurements, Analysis, and Simulation of Microwave Instability in the Low Energy Ring of KEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP083, pp. 4731-4733.
- Y. Nie et al., “Full Characterization of the Bunch-Compressor Dipoles for FLUTE”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1585-1588.
- N. Fietier and C. Bieth, “Model Measurements and Preliminary Design of the R. F. Cavities for the EULIMA Cyclotron Concept”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 964-967.
- D. Shu et al., “Mechanical Design of a New Precision Alignment Apparatus for Compact X-ray Compound Refractive Lens Manipulator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 168-172.
- G. Geschonke et al., “Ultimate Performance of the LEP RF System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH123, pp. 1059-1061.
- R. Nagaoka, P. Brunelle, A. Nadji, and L. S. Nadolski, “Study of a Lattice with a Lower Emittance at SOLEIL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC004, pp. 1155-1157.
- Y.-T. Hsieh et al., “Analysis of low-frequency disturbances (0.3 Hz) in TPS and TLS beam orbit feedback systems”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB059, this conference.
- K. T. Nguyen and H. S. Uhm, “Ion Beam Steering with a High-Intensity Electron Beam”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2623-2626.
- C. J. Spataro, A. K. Jain, M. Rehak, and J. Skaritka, “Design and Measurement of the NSLSII Sextupoles”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP010, pp. 151-153.
- M. Izawa et al., “Beam Test of a SiC Duct Developed for an RF Damped Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP053L, pp. 2006-2007.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
- R. Miyamoto et al., “First Results of Beam Commissioning on the ESS Site for the Ion Source and Low Energy Beam Transport”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1118-1121.
- C.-W. Hsu, H.-S. Fung, and C. S. Lee, “Development of residual gas analyzer measurement system capable of operating in the 10 Torr vacuum range”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB004, this conference.
- A. N. Didenko et al., “Neutron Accelerating Tubes with Microwave Deuterons Source Using Electron-cyclotron Resonance Effect”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC50, pp. 441-443.
- P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 863-866.
- A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1491-1493.
- L. Tan, S.-Q. Tian, W. Zhang, X. Liu, and X. Wu, “Impact of insertion devices on SSRF‑U lattice”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC35, pp. 3068-3070.
- K. Ohmi, Y. Cai, J. W. Flanagan, Y. Funakoshi, and K. Oide, “Dynamic Beta/Emittance Effects in the Measurement of Horizontal Beam Sizes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAC05, pp. 41-43.
- M. Rehak, A. K. Jain, J. Skaritka, and C. J. Spataro, “Design and Measurement of the NSLS II Quadrupole Prototypes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP007, pp. 142-144.
- J. Gao, J. Le Duff, and Y. Thiery, “Design Studies for a High Current Bunching System for CLIC Test Facility (CTF3) Drive Beam”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB01, pp. 95-97.
Back to search