Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
[n] M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3360-3362. doi:10.18429/JACoW-IPAC2016-THPMB050
[n] A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
[n] D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
[n] T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 220-222. doi:10.18429/JACoW-SRF2017-MOPB070
[n] P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
[n] Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
[n] G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
[n] E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
[n] T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
[n] J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
[n] M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
[n] G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
[n] S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
[n] J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2040-2043.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-03, pp. 149-151.
[n] W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
[n] G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1065-1066. doi:10.18429/JACoW-IPAC2016-TUOBB01
[n] S. Henderson, “SNS Progress, Challenges and Upgrade Options”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THXG01, pp. 2892-2896.
[n] M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
[n] R. S. Roberts, A. A. S. Awwal, E. S. Bliss, R. R. Leach, M. C. Rushford, and K. C. Wilhelmsen, “Image Analysis for the Automated Alignment of the Advanced Radiography Capability (ARC) Diagnostic Path”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC085, pp. 1274-1277.
[n] E. N. Shaposhnikova et al., “Flat Bunches in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1413-1415. doi:10.18429/JACoW-IPAC2014-TUPME028
[n] B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1201-1205. doi:10.18429/JACoW-ICALEPCS2017-THCPL06
[n] R. Corsini et al., “Medical activities in CLEAR: studies towards radiotherapy using Very High Energy Electrons (VHEE) in the FLASH regime”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 674-677. doi:10.18429/JACoW-LINAC2024-THPB018
[n] X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 92-94. doi:10.18429/JACoW-MEDSI2018-TUPH27
[n] W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
[n] P. Snopok and G. G. Hanson, “Six-Dimensional Cooling Lattice Studies for the Muon Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE080, pp. 3533-3535.
[n] A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
[n] E. Khabibullina et al., “Development of the Ion Beams HIPR-1 Transport Channel for Ion Energy Losses Measurement in Plasma Target”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 276-278. doi:10.18429/JACoW-RUPAC2018-TUPSA61
[n] J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 109-112.
[n] E. Bouquerel, E. Baussan, M. Dracos, F. R. Osswald, P. Poussot, and N. Vassilopoulos, “ESSnuSB: A New Facility Concept for the Production of Very Intense Neutrino Beams in Europe”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1550-1552. doi:10.18429/JACoW-IPAC2014-TUPRI001
[n] E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-10, pp. 455-457.
[n] L. S. Nadolski, P. Brunelle, and X. N. Gavald?â, “First MOGA Optimization of the Soleil Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2568-2570. doi:10.18429/JACoW-IPAC2017-WEPAB005
[n] A. Caruette, M. Fouaidy, T. Junquera, J. C. Le Scornet, and Q. S. Shu, “Analysis of Thermal Effects in TESLA SRF Cavities using Surface Scanning Thermometers”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP043L, pp. 2112-2114.
[n] V. L. Granatstein, P. E. Latham, W. Lawson, J. H. McAdoo, M. Reiser, and C. D. Striffler, “New Concepts in Microwave Sources for e+e- Supercolliders”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-49, pp. 163-165.
[n] G. K. Mehta, “Superconducting Linac Booster to NSC Pelletron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7B004, pp. 878-884.
[n] F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
[n] C. H. Kuo et al., “FPGA-based Longitudinal Bunch-by-bunch Feedback System for TLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH098, pp. 3023-3025.
[n] J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
[n] P. Craievich, C. Bontoiu, M. Ferianis, M. Poggi, V. V. Smaluk, and G. Trovato, “Design of the cavity BPM system for FERMI@elettra”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC09, pp. 165-167.
[n] C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
[n] I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4362-4365. doi:10.18429/JACoW-IPAC2017-THPIK113
[n] A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
[n] L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337.
[n] C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
[n] J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3019-3022. doi:10.18429/JACoW-IPAC2024-THPC21
[n] P. Michelato et al., “Status of the ESS Medium Beta Cavities at INFN - LASA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2211-2214. doi:10.18429/JACoW-IPAC2019-TUPTS119
[n] E. W. Colston and V. E. Hart, “Alignment Philosophy, Design and Techniques Used at LAMPF”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper I01, pp. 209-217.
[n] A. Dolinskii, O. A. Bezshyyko, V. Gostishchev, and M. Steck, “Simulations of Pellet Target Effects with Program PETAG01”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP15, pp. 216-219.
[n] T. Kuo et al., “On the Development of 2 mA RF H Beams for Compact Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-04, pp. 177-180.
[n] S. C. Gottschalk and D. C. Quimby, “The Magnetic Design and Performance of the SRRC-U9 Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA25, pp. 2677-2679.
[n] M. Johnson, H.-H. Braun, T. J. C. Ekel?Âf, R. J. M. Y, and V. G. Ziemann, “RF-breakdown Experiments at the CTF3 Two-beam Test-stand”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP131, pp. 2800-2802.
[n] D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 607-610.
[n] R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
[n] S. Kashiwagi et al., “Development of high-power 4K Nb3Sn superconducting RF electron linac for medical radioisotope production”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 797-800. doi:10.18429/JACoW-LINAC2024-THPB085
[n] J. P. Blaser and H. A. Willax, “Progress Report on the 500 - MeV Isochronous Cyclotron Meson Factory of ETH Zurich”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-001, pp. XX-XX.
[n] Y. Takeda, Y. Irie, and I. Sugai, “Ultra-high Resolution Observation Device for Carbon Stripper Foil”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS086, pp. 1740-1742.
[n] Y. G??mez Mart?¡nez et al., “Power Couplers for Spiral-2”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOA04, pp. 947-950.
[n] A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
[n] K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
[n] J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2952-2955. doi:10.18429/JACoW-IPAC2015-WEPMN015
[n] A. Maiti, C. D. Datta, S. P. Bhagwat, D. Sarkar, and S. Dasgupta, “Design and development of micro-controller based embedded system for different types of power supplies”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_070.
[n] A. Bogacz, G. Krafft, R. Li, L. Merminga, B. Yunn, and Y. Zhang, “CONCEPTS FOR ELIC - A HIGH LUMINOSITY CEBAF BASED ELECTRON-LIGHT ION COLLIDER”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOAO06, pp. XX-XX.
[n] A. Calanna, L. Calabretta, T. Boiesan, R. R. Johnson, L. AC. Piazza, and V. Sabaiduc, “Compact Cyclotron for 35 MeV Protons and 8 AMeV of H2+”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3776-3778. doi:10.18429/JACoW-IPAC2015-THPF036
[n] T. Kikuchi, T. Katayama, M. Nakajima, and K. Horioka, “Emittance Growth and Particle Distributions During Final Beam Bunching in Heavy Ion Fusion Driver”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15023, pp. XX-XX.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] F. Zimmermann, M. Antonelli, A. P. Blondel, M. Boscolo, J. P. Farmer, and A. Latina, “Muon Collider Based on Gamma Factory, FCC-ee and Plasma Target”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1691-1694. doi:10.18429/JACoW-IPAC2022-WEPOST009
[n] M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
[n] M. P. Ehrlichman et al., “Measurement of Beam Size in Intrabeam Scattering Dominated Beams at Various Energies at CesrTA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1635-1637. doi:10.18429/JACoW-IPAC2014-TUPRI035
[n] W. Lawson et al., “Operating Characteristics of a Two-Cavity X-Band Gyroklystron Experiment”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO453, pp. 195-197.
[n] E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
[n] S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Gas Jet Profile Monitor for Use in IOTA Proton Beam”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 347-349. doi:10.18429/JACoW-IBIC2017-WEPCC05
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
[n] Y. S. Zhu, F. S. Chen, W. Kang, and X. J. Sun, “Magnetic Field Design of the BAPS High Precision Quadrupole Magnet”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME011, pp. 3531-3533.
[n] S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
[n] J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245. doi:10.18429/JACoW-SRF2021-MOPTEV017
[n] S. Tuma et al., “Integration of Beam Diagnostics Devices for a Therapy Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3641-3643. doi:10.18429/JACoW-IPAC2014-THPME161
[n] M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
[n] P. W. Rambo and S. Brandon, “EM-PIC Simulations of e-Beam Interaction with Field Emitted Ions from Bremsstrahlung Targets”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4035, pp. 475-477.
[n] C.-C. Kuo and H.-J. Tsai, “Design of Low Momentum Compaction Lattices for the TPS Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA060, pp. 217-219.
[n] L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
[n] J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4562-4564. doi:10.18429/JACoW-IPAC2017-THPVA054
[n] J. M. Potter, M. L. Barnes, and E. A. Bjorklund, “Programmable Master-Timer System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 628-631.
[n] W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 62-64. doi:10.18429/JACoW-IPAC2016-MOOCB02
[n] Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
- M.-S. Chiu et al., “The Commmissioning of Phase-I Insertion Devices in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3360-3362.
- A. V. Apelfeld et al., “Application of the Particle Backscattering Method for the Certification of the Oxide Protective Coatings at the Surface of Al Alloys”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP51C, pp. 2422-2424.
- D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212.
- T. M. Huang et al., “The Improvement of the Power Coupler for CADS SC Spoke Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 220-222.
- P. Fernandes, R. Parodi, and A. Schenone, “Design of a Prototype Disk and Washer Structure for a High Intensity Electron Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-11, pp. 550-552.
- Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
- G. Morpurgo, “The Bom 1000 Turn Display: A Tool to Visualize the Transverse Phase-space Topology at LEP”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14H, pp. 1571-1573.
- E. Kako et al., “Characteristics of the Results of Measurement on 1.3 GHz High Gradient Superconducting Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C12, pp. 425-429.
- T. Sawamura et al., “A General Analysis of Wireline-Type Monitor for Relativistic Electron Beams”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-83, pp. 902-904.
- J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
- M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
- G. Haouat, C. Couillaud, J. Di Crescenzo, R. Joly, J. Raimbourg, and S. Seguin, “Electron Beam Diagnostics on the ELSA Free Electron Laser”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-23, pp. 103-105.
- S. Biedron, J. W. Lewellen, and M. Virgo, “High-Average, High-Peak Current Injector Design”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP057, pp. XX-XX.
- J. E. Griffin, J. F. Bridges, and J. A. MacLachlan, “Review of the Fermilab Main Ring Accelerator Study Program as Directed to the PPbar Program”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2040-2043.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-03, pp. 149-151.
- W. E. Nexsen, R. D. Scarpetti, and J. Zentler, “Reconstruction of FXR Beam Conditions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH127, pp. 2383-2385.
- G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1065-1066.
- S. Henderson, “SNS Progress, Challenges and Upgrade Options”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THXG01, pp. 2892-2896.
- M. Zerlauth, A. Jimeno, G. Morpurgo, and R. Schmidt, “The Electrical Circuit Description for the LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO014, pp. 2058-2060.
- R. S. Roberts, A. A. S. Awwal, E. S. Bliss, R. R. Leach, M. C. Rushford, and K. C. Wilhelmsen, “Image Analysis for the Automated Alignment of the Advanced Radiography Capability (ARC) Diagnostic Path”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC085, pp. 1274-1277.
- E. N. Shaposhnikova et al., “Flat Bunches in the LHC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1413-1415.
- B. T. Fishler et al., “Sustaining the National Ignition Facility (NIF) Integrated Computer Control System (ICCS) over its Thirty Year Lifespan”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1201-1205.
- R. Corsini et al., “Medical activities in CLEAR: studies towards radiotherapy using Very High Energy Electrons (VHEE) in the FLASH regime”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 674-677.
- X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 92-94.
- W. Chen, C. Cao, C. Shi, and Z. Yin, “End Chamfer Study and Field Measurements of the BEPCII Dipoles”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT004, pp. 919-921.
- P. Snopok and G. G. Hanson, “Six-Dimensional Cooling Lattice Studies for the Muon Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE080, pp. 3533-3535.
- A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
- E. Khabibullina et al., “Development of the Ion Beams HIPR-1 Transport Channel for Ion Energy Losses Measurement in Plasma Target”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 276-278.
- J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 109-112.
- E. Bouquerel, E. Baussan, M. Dracos, F. R. Osswald, P. Poussot, and N. Vassilopoulos, “ESSnuSB: A New Facility Concept for the Production of Very Intense Neutrino Beams in Europe”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1550-1552.
- E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-10, pp. 455-457.
- L. S. Nadolski, P. Brunelle, and X. N. Gavald?â, “First MOGA Optimization of the Soleil Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2568-2570.
- A. Caruette, M. Fouaidy, T. Junquera, J. C. Le Scornet, and Q. S. Shu, “Analysis of Thermal Effects in TESLA SRF Cavities using Surface Scanning Thermometers”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP043L, pp. 2112-2114.
- V. L. Granatstein, P. E. Latham, W. Lawson, J. H. McAdoo, M. Reiser, and C. D. Striffler, “New Concepts in Microwave Sources for e+e- Supercolliders”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-49, pp. 163-165.
- G. K. Mehta, “Superconducting Linac Booster to NSC Pelletron”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 7B004, pp. 878-884.
- F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
- C. H. Kuo et al., “FPGA-based Longitudinal Bunch-by-bunch Feedback System for TLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH098, pp. 3023-3025.
- J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
- P. Craievich, C. Bontoiu, M. Ferianis, M. Poggi, V. V. Smaluk, and G. Trovato, “Design of the cavity BPM system for FERMI@elettra”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC09, pp. 165-167.
- C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
- I. Terechkine et al., “Tuner of a Second Harmonic Cavity of the Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4362-4365.
- A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
- L. Stingelin et al., “High Power RF Systems and Resonators for Sector Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CIO01, pp. 332-337.
- C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
- J. Wieland, A. Romanov, A. Valishev, G. Stancari, and N. Kuklev, “Measured dynamic aperture and detuning of nonlinear integrable optics”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC21, pp. 3019-3022.
- P. Michelato et al., “Status of the ESS Medium Beta Cavities at INFN - LASA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2211-2214.
- E. W. Colston and V. E. Hart, “Alignment Philosophy, Design and Techniques Used at LAMPF”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper I01, pp. 209-217.
- A. Dolinskii, O. A. Bezshyyko, V. Gostishchev, and M. Steck, “Simulations of Pellet Target Effects with Program PETAG01”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP15, pp. 216-219.
- T. Kuo et al., “On the Development of 2 mA RF H Beams for Compact Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-04, pp. 177-180.
- S. C. Gottschalk and D. C. Quimby, “The Magnetic Design and Performance of the SRRC-U9 Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA25, pp. 2677-2679.
- M. Johnson, H.-H. Braun, T. J. C. Ekel?Âf, R. J. M. Y, and V. G. Ziemann, “RF-breakdown Experiments at the CTF3 Two-beam Test-stand”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP131, pp. 2800-2802.
- D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 607-610.
- R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484.
- S. Kashiwagi et al., “Development of high-power 4K Nb3Sn superconducting RF electron linac for medical radioisotope production”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 797-800.
- J. P. Blaser and H. A. Willax, “Progress Report on the 500 - MeV Isochronous Cyclotron Meson Factory of ETH Zurich”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-001, pp. XX-XX.
- Y. Takeda, Y. Irie, and I. Sugai, “Ultra-high Resolution Observation Device for Carbon Stripper Foil”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS086, pp. 1740-1742.
- Y. G??mez Mart?¡nez et al., “Power Couplers for Spiral-2”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOA04, pp. 947-950.
- A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
- K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
- J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2952-2955.
- A. Maiti, C. D. Datta, S. P. Bhagwat, D. Sarkar, and S. Dasgupta, “Design and development of micro-controller based embedded system for different types of power supplies”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_070.
- A. Bogacz, G. Krafft, R. Li, L. Merminga, B. Yunn, and Y. Zhang, “CONCEPTS FOR ELIC - A HIGH LUMINOSITY CEBAF BASED ELECTRON-LIGHT ION COLLIDER”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOAO06, pp. XX-XX.
- A. Calanna, L. Calabretta, T. Boiesan, R. R. Johnson, L. AC. Piazza, and V. Sabaiduc, “Compact Cyclotron for 35 MeV Protons and 8 AMeV of H2+”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3776-3778.
- T. Kikuchi, T. Katayama, M. Nakajima, and K. Horioka, “Emittance Growth and Particle Distributions During Final Beam Bunching in Heavy Ion Fusion Driver”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15023, pp. XX-XX.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- F. Zimmermann, M. Antonelli, A. P. Blondel, M. Boscolo, J. P. Farmer, and A. Latina, “Muon Collider Based on Gamma Factory, FCC-ee and Plasma Target”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1691-1694.
- M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
- M. P. Ehrlichman et al., “Measurement of Beam Size in Intrabeam Scattering Dominated Beams at Various Energies at CesrTA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1635-1637.
- W. Lawson et al., “Operating Characteristics of a Two-Cavity X-Band Gyroklystron Experiment”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO453, pp. 195-197.
- E. P. Gibbons, M. T. Heron, and N. P. Rees, “GDA and EPICS Working in Unison for Science Driven Data Acquisition and Control at Diamond Light Source”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUAAUST01, pp. 529-532.
- S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Gas Jet Profile Monitor for Use in IOTA Proton Beam”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 347-349.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
- Y. S. Zhu, F. S. Chen, W. Kang, and X. J. Sun, “Magnetic Field Design of the BAPS High Precision Quadrupole Magnet”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME011, pp. 3531-3533.
- S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
- J. Steimel et al., “Development and Operation of PIP-II Injector Test, SSR1 Cryomodule, 325 MHz Amplifiers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 245.
- S. Tuma et al., “Integration of Beam Diagnostics Devices for a Therapy Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3641-3643.
- M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
- P. W. Rambo and S. Brandon, “EM-PIC Simulations of e-Beam Interaction with Field Emitted Ions from Bremsstrahlung Targets”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4035, pp. 475-477.
- C.-C. Kuo and H.-J. Tsai, “Design of Low Momentum Compaction Lattices for the TPS Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA060, pp. 217-219.
- L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535.
- J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4562-4564.
- J. M. Potter, M. L. Barnes, and E. A. Bjorklund, “Programmable Master-Timer System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 628-631.
- W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 62-64.
- Y. Jongen, M. Lacroix, M. Loiselet, A. Ninane, G. Ryckewaert, and S. Zaremba, “A Two-Cyclotron Concept for the Production of Radioactive Ion Beams”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1620-1623.
Back to search