JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Shibata, H. Hisamatsu, K. Kanazawa, M. Shirai, and Y. Suetsugu, “Gas Desorption from TiN-Coated Copper Beam Duct”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP015, pp. 381-383. 
[n]	G. Decker et al., “Reduction of Open-Loop Low Frequency Beam Motion at the APS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR19, pp. 303-305. 
[n]	S. R. Tiwari et al., “Power Supplies for INDUS-1”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D065, pp. 558-560. 
[n]	S. Myers, “Effect of Reactive Feedback on the Transverse Mode Coupling Instability Using the Few-Particles Model and Simulation”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2341-2344. 
[n]	S. Ozaki, “RHIC Commissioning and First Results”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOAL001, pp. 1-5. 
[n]	E. A. Heighway and C. R. Hoffmann, “SUPERGOBLIN-The Accelerated Orbit Code in Use for the Chalk River Superconducting Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2522-2525. 
[n]	R. S. Shinde, P. Pareek, R. R. Yadav, and S. Kotaiah, “Development of Fast Decay Type Pulsed Kicker Magnet for Indus-1”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16059, pp. XX-XX. 
[n]	F. D. Dziuba et al., “Development of Superconducting CH Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO037, pp. 169-171. 
[n]	F. D. Dziuba et al., “A Superconducting 217 MHz CH Cavitiy for the CW Demonstrator at GSI”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP006, pp. 906-908. 
[n]	K. Ohmi, H. Fukuma, and M. Tobiyama, “Electron Cloud and Ion Effects and Their Mitigation in FCC-ee”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 120-124. doi:10.18429/JACoW-eeFACT2016-TUT3AH5
[n]	Y. Joo, P. Buaphad, Y. Kim, H. R. Lee, J. Y. Lee, and S. Lee, “Design of 3 MeV S-band Electron Linac Structure With 2.5 Bunching Cells”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2934-2936. doi:10.18429/JACoW-IPAC2019-WEPRB055
[n]	T. Honma et al., “Improvements and Applications at NIRS Cyclotron Facility”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-07, pp. XX-XX. 
[n]	Y. W. Kang, R. Kustom, and R. Nassiri, “Properties of Longitudinally Uniform Beam Waveguides”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP185, pp. 1834-1836. 
[n]	V. I. Balbekov and N. V. Mokhov, “Low-Budget Muon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH144, pp. 1553-1555. 
[n]	S. Ogorodnikov, V. Petrunin, and M. F. Vorogushin, “Radioscopic Discrimination of Materials in 1-10 MeV Range for Customs Applications”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI103, pp. 2807-2809. 
[n]	K. Ohmi et al., “Study of Beam-beam Issue for KEKB Crab Crossing”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP035, pp. 2596-2598. 
[n]	M. Schmoekel et al., “Experience on In-situ Module Repair and Set Up of Non XFEL Cavity Strings at DESY”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 269-272. doi:10.18429/JACoW-SRF2017-MOPB088
[n]	H. Stockhorst, T. Katayama, B. Lorentz, R. Maier, and D. Prasuhn, “Stochastic Cooling for the HESR at the GSI-FAIR Complex”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH086, pp. 231-233. 
[n]	C. Kim, “Simulation of Emittance Growth in the ALS Pre-Injector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-47, pp. 427-429. 
[n]	S. Ohsawa, Y. Hozumi, M. Ikeda, K. Kanno, T. Sugimura, and M. Tawada, “High Brightness Electron Gun for X-Ray Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP016, pp. 1488-1490. 
[n]	F. Furuta, D. J. Bice, A. C. Crawford, R. L. Geng, T. Konomi, and K. Saito, “S0 Tight Loop Studies on ICHIRO 9-Cell Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO082, pp. 814-817. 
[n]	H. Fukuma, K. Ohmi, Y. Suetsugu, and M. Tobiyama, “Electron Cloud at SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 125-129. doi:10.18429/JACoW-eeFACT2016-TUT3AH6
[n]	F.-J. Decker and R. K. Jobe, “Phase Gradients in Acceleration Structures”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 523-526. 
[n]	Z. D. Farkas, H. A. Hogg, G. A. Loew, and P. B. Wilson, “Recent Progress on Sled, The SLAC Energy Doubler”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1299-1303. 
[n]	D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840. 
[n]	R. L. Kustom, “Intense Pulsed Neutron Sources”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3115-3120. 
[n]	K. Endo et al., “High Field Pulse Dipole and Quadrupole Magnets for Compact Medical Pulse Synchrotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP18001, pp. XX-XX. 
[n]	A. Mapar, F. Pourboghrat, T. R. Bieler, C. Compton, and J. E. Murphy, “Hydroforming of Large Grain Niobium Tube”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB040, pp. 1171-1175. 
[n]	S. V. Kuzikov, A. A. Bogdashov, G. G. Denisov, K. M. Schirm, I. Syratchev, and A. A. Vikharev, “A 12 GHz Pulse Compressor and Components for CLIC Test Stand”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA005, pp. 44-46. 
[n]	O. V. Singh and R. J. Nawrocky, “Upgrade of Beam Steering System Components and Controls for the NSLS Storage Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1902-1905. 
[n]	H. Ishizuka, A. Fisher, R. Prohaska, and N. Rostoker, “Determination of the Beam Width in a Stellatron Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 615-618. 
[n]	D. J. Liska, R. A. Jameson, J. B. Sharp, and J. D. Wallace, “Accelerator Field Measurements at High Power”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 601-604. 
[n]	E. Acerbi, M. Bona, D. Leroy, R. Perin, and L. Rossi, “State of the Construction of the Two INFN Full Length Superconducting Dipole Prototype Magnets for the Large hadron Collider (LHC)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1420-1423. 
[n]	M. L. Lopes, M. N. Martins, P. B. Rios, and J. Takahashi, “The IFUSP Microtron New Configuration”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE066, pp. 3703-3705. 
[n]	K. Fujii et al., “Construction of a Test Magnet for JLC Final Focus”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU438, pp. 408-410. 
[n]	C. A. Treml, S. K. Brown, and J. D. Bernardin, “Resonance Control Cooling System for a Proto-type Coupled Cavity Linac”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP076, pp. XX-XX. 
[n]	J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461. 
[n]	D. S. Yurov, A. S. Alimov, B. S. Ishkanov, N. I. Pakhomov, V. P. Sakharov, and V. I. Shvedunov, “Status of 1 MeV 25 kW CW Electron Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC048, pp. 541-543. 
[n]	H. J. Burckhart et al., “The Supervisor of the ATLAS Detector Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH614, pp. XX-XX. 
[n]	U. Trinks et al., “Design Status of the Munich Cyclotron SuSe”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2108-2111. 
[n]	K. E. Gray, “Experimental Aspects of High-Tc Superconductors”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87B02, pp. XX-XX. 
[n]	A. V. Samoshin and S. M. Polozov, “Development of Proton Therapy at the SC Linac with BEAMDULAC-SCL Code”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB070, pp. 633-635. 
[n]	L. M. Young and D. R. Keffeler, “The RF Power System for the Chopper/Buncher System on the NBS-Los Alamos RTM”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2165-2168. 
[n]	K. H??bner, “Accelerator-Based Neutrino Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THZGB002, pp. 30-33. 
[n]	J. A. Pasour, T. P. Hughes, and K. Thomason, “Development of the Collective Interaction Klystron (CIK)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 109-112. 
[n]	R. Biscardi and J. W. Bittner, “Switched Detector for Beam Position Monitor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1516-1519. 
[n]	T. Takahashi et al., “Study on 2 Cell RF-Deflector Cavity for Ultra-short Electron Bunch Measurement”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM01, pp. 628-630. 
[n]	M. Schippers, J. Duppich, G. Goitein, E. Hug, M. Jermann, A. Mezger, and E. Pedroni, “First Year Of Operation Of PsiÔÇÖs New Sc Cyclotron And Beam Lines For Proton Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 15-17. 
[n]	D. Boehne, “Future Accelerator Projects and Collaboration with Industry”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 71-74. 
[n]	R. Bossart, J. P. Papis, and V. Rossi, “Synchronous RF-Receivers for Beam Position and Intensity Measurements at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1899-1902. 
[n]	M. A. Oothoudt, C. Pillai, and M. V. Zumbro, “Automatic Beam Position Control at LASREF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P044, pp. 2064-2066. 
[n]	A. N. Ermakov, A. N. Kamanin, V. G. Sayapin, V. I. Shvedunov, D. S. Yurov, and I. V. Shvedunov, “Control Systems for Radiography and Cargo Inspection RF Accelerators”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC39, pp. 410-412. 
[n]	F. Markley, J. Biggs, and A. McKamey, “Adhesive and Insultating Systems for Cryogenic and Superconducting Coils”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 734-736. 
[n]	R. Bossart, L. Burnod, J. Gareyte, V. Rossi, and B. de Raad, “The Damper of the Transverse Instabilities of the SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3284-3287. 
[n]	J. A. Holmes, V. Danilov, J. D. Galambos, and K. Woody, “Longitudinal Impedance Simulations in ORBIT: Benchmarking and Application to the SNS Extracton Kicker”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH311, pp. 2057-2059. 
[n]	A. Kiourkos, S. Infante, and K. S. Seintaridis, “Energy Consumption Monitoring With Graph Databases and Service Oriented Architecture”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 720. doi:10.18429/JACoW-ICALEPCS2019-TUBPL06
[n]	S. K. Esin, L. V. Kravchuk, V. A. Matveev, P. N. Ostroumov, and V. L. Serov, “Commissioning/Operation of the Moscow Meson Factory Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO2-01, pp. 31-35. 
[n]	I. V. Gribov, I. V. Shvedunov, and V. R. Yaliyan, “RaceTrack Microtron Control System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH024, pp. 819-821. 
[n]	T. Tomimasu, T. Mikado, T. Noguchi, S. Sugiyama, and T. Yamazaki, “An Electron Undulating Ring for VLSI Lithography”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3403-3406. 
[n]	F. D. Wells and S. P. Jachim, “A Technique for Improving the Accuracy and Dynamic Range of Beam Position-Detection Equipment”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1595-1597. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search