Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Kumaki, K. Sakaue, M. Washio, R. Kuroda, H. Toyokawa, and K. Yamada, “Development of a High-power THz-TDS System on the Basis of a Compact Electron Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP039, pp. 2190-2192.
[n] R. Stassen, P. B. Brittner, G. Schug, and H. S. Singer, “Pickup Structures for the HESR Stochastic Cooling System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH085, pp. 228-230.
[n] I.-C. Sheng and Y.-M. Hsiao, “Advanced power density mapping for FEA simulations of synchrotron accelerator high heat load components”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB054, unpublished.
[n] N. Kanaya and K. Furukawa, “Reconfigurable Embedded Interface System for High Energy Accelerators”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP068, pp. 239-241.
[n] B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1402-1405.
[n] M. Droba, A. Ates, O. Meusel, H. Niebuhr, U. Ratzinger, and J. F. Wagner, “Confinement, Accumulation and Diagnostic of Low Energy Ion Beams in Toroidal Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS004, pp. 2487-2489.
[n] P. Junior, H. Deitinghoff, K. D. Halfmann, H. Klein, and A. Schempp, “A RFQ Concept Using Circular Rods”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B17, pp. 81-83.
[n] D. M. Zhou, Y. Chen, J. Tang, and N. Wang, “Explicit Maps for the Fringe Field of a Quadrupole”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD091, pp. 4500-4502.
[n] M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
[n] U. Ratzinger et al., “The Driver Linac of the Neutron Source FRANZ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS040, pp. 2577-2579.
[n] P. N. Barron and D. Bartlett, “The Interaction between Safety Interlock and Motion Control Systems on the Dingo Radiography Instrument at the OPAL Research Reactor”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC025, pp. 1141-1143.
[n] R. Baartman and J. Welz, “60 keV Beam Transport Line and Switchyard for ISAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W035, pp. 2778-2780.
[n] M. Cargnelutti, S. Bassanese, G. Brajnik, S. Cleva, R. De Monte, and P. Leban, “Stability Tests with Pilot-Tone Based Elettra BPM RF Front End and Libera Electronics”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 289-292. doi:10.18429/JACoW-IBIC2018-TUPB13
[n] P. Gil and J. Fernández, “Research and develoment of a picosecond timing system”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA176, unpublished.
[n] C.-K. Huang et al., “Modeling of Nonlinear Beam Dynamics via a Novel Particle-Mesh Method and Surrogate Models with Symplectic Neural Networks”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 462-464. doi:10.18429/JACoW-NAPAC2022-TUPA53
[n] N. Taylor et al., “A high-power positron converter based on a recirculated liquid metal in-vacuum target”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1210-1213. doi:10.18429/JACoW-IPAC2024-TUPC83
[n] A. K. Mitra et al., “RF Test and Commissioning of the Low and High Beta Bunchers for the TRIUMF ISAC Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO020, pp. 2178-2180.
[n] P. Reinhardt-Nickoulin, A. Feschenko, and S. Gavrilov, “ION MONITOR OF TRANSVERSE BEAM PARAMETERS FOR INR PROTON LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH09, pp. XX-XX.
[n] V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, J. M. Schippers, and D. C. Weber, “Different Methods to Increase the Transmission in Cyclotron-Based Proton Therapy Facilities”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBI01, pp. 368-372. doi:10.18429/JACoW-CYCLOTRONS2022-FRBI01
[n] E. Nolte et al., “The Munich Heavy Ion Postaccelerator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1153-1156.
[n] G. Brajnik, S. Cleva, R. De Monte, and D. Giuressi, “A Common Diagnostic Platform for Elettra 2.0 and FERMI”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 280-282. doi:10.18429/JACoW-IBIC2019-TUPP003
[n] E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kumaki, K. Sakaue, M. Washio, R. Kuroda, H. Toyokawa, and K. Yamada, “Development of a High-power THz-TDS System on the Basis of a Compact Electron Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP039, pp. 2190-2192.
- R. Stassen, P. B. Brittner, G. Schug, and H. S. Singer, “Pickup Structures for the HESR Stochastic Cooling System”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH085, pp. 228-230.
- I.-C. Sheng and Y.-M. Hsiao, “Advanced power density mapping for FEA simulations of synchrotron accelerator high heat load components”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB054, this conference.
- N. Kanaya and K. Furukawa, “Reconfigurable Embedded Interface System for High Energy Accelerators”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP068, pp. 239-241.
- B. Campbell and R. Ranganathan, “An Experiemental and Analytical Study of a Buoyancy Driven Cooling System for a Particle Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1402-1405.
- M. Droba, A. Ates, O. Meusel, H. Niebuhr, U. Ratzinger, and J. F. Wagner, “Confinement, Accumulation and Diagnostic of Low Energy Ion Beams in Toroidal Fields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS004, pp. 2487-2489.
- P. Junior, H. Deitinghoff, K. D. Halfmann, H. Klein, and A. Schempp, “A RFQ Concept Using Circular Rods”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B17, pp. 81-83.
- D. M. Zhou, Y. Chen, J. Tang, and N. Wang, “Explicit Maps for the Fringe Field of a Quadrupole”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD091, pp. 4500-4502.
- M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
- U. Ratzinger et al., “The Driver Linac of the Neutron Source FRANZ”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS040, pp. 2577-2579.
- P. N. Barron and D. Bartlett, “The Interaction between Safety Interlock and Motion Control Systems on the Dingo Radiography Instrument at the OPAL Research Reactor”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC025, pp. 1141-1143.
- R. Baartman and J. Welz, “60 keV Beam Transport Line and Switchyard for ISAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W035, pp. 2778-2780.
- M. Cargnelutti, S. Bassanese, G. Brajnik, S. Cleva, R. De Monte, and P. Leban, “Stability Tests with Pilot-Tone Based Elettra BPM RF Front End and Libera Electronics”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 289-292.
- P. Gil and J. Fernández, “Research and develoment of a picosecond timing system”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA176, unpublished.
- C.-K. Huang et al., “Modeling of Nonlinear Beam Dynamics via a Novel Particle-Mesh Method and Surrogate Models with Symplectic Neural Networks”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 462-464.
- N. Taylor et al., “A high-power positron converter based on a recirculated liquid metal in-vacuum target”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC83, pp. 1210-1213.
- A. K. Mitra et al., “RF Test and Commissioning of the Low and High Beta Bunchers for the TRIUMF ISAC Facility”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO020, pp. 2178-2180.
- P. Reinhardt-Nickoulin, A. Feschenko, and S. Gavrilov, “ION MONITOR OF TRANSVERSE BEAM PARAMETERS FOR INR PROTON LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH09, pp. XX-XX.
- V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, J. M. Schippers, and D. C. Weber, “Different Methods to Increase the Transmission in Cyclotron-Based Proton Therapy Facilities”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRBI01, pp. 368-372.
- E. Nolte et al., “The Munich Heavy Ion Postaccelerator”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1153-1156.
- G. Brajnik, S. Cleva, R. De Monte, and D. Giuressi, “A Common Diagnostic Platform for Elettra 2.0 and FERMI”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 280-282.
- E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
Back to search